Skip to main content
  • RDG VERTICAL SLIDE WITH CLAMP MYFORD SIZE IMPERIAL GRADUATION MILLING LATHES

    RDG VERTICAL SLIDE WITH CLAMP MYFORD SIZE IMPERIAL GRADUATION MILLING LATHES

    £85.00
    Buy it now
    Free P&P
    • 136 watching
    • |
    • 63 sold
    SMALL VERTICAL SLIDE MYFORD SIZE. 2 TEE SLOTS RUN VERTICAL. HAND WHEEL HAS IMPERIAL GRADUATIONS. (does not come with screws or nuts). THE SLIDE MOVES UP AND DOWN. MILLING TABLE IS 125MM X 100MM.
  • Myford super seven ml7 ml10 speed 10 Lathe bearing alignment tool

    Myford super seven ml7 ml10 speed 10 Lathe bearing alignment tool

    £11.00
    Buy it now
    Free P&P
    • 17 watching
    • |
    • 4 sold
    This tool is made to aid the alignment of jobs within the chuck of a lathe. It is made out of 12mm square steel to allow for simple loading in to tool holders, there are two shielded ball bearings, on...
  • Myford ML 7, metalworking lathe.

    Myford ML 7, metalworking lathe.

    £100.00
    1 bid
    + £0.00 P&P
    • 46 watching
    Myford 7 Series Metalworking (and other materials) Lathe.  Good working order, 3 jaw chuck with inner and outer jaws, center steady, faceplate.  Span between centers 20 inches, turning diameter 7 inch...
  • Myford ML7 Lathe, Some Accessories, Lightly Used, Good Condition

    Myford ML7 Lathe, Some Accessories, Lightly Used, Good Condition

    £305.00
    4 bids
    + £0.00 P&P
    • 109 watching
    Myford ML7 lathe and stand ,good condition with very little use , some tooling comes with it , along with its stand , cash on collection, no PayPal
  • Myford ML7-R lathe - ideal for model railway building

    Myford ML7-R lathe - ideal for model railway building

    £460.00
    20 bids
    + £0.00 P&P
    • 74 watching
    Myford ML7-R Lathe This used to be my father in laws lathe he used it for making model railways. It hasn't been used in 2 years but was working fine then. I really don't know anything about lat...
  • Myford ML7 Lathe, in good working order with accessories

    Myford ML7 Lathe, in good working order with accessories

    £327.00
    6 bids
    + £0.00 P&P
    • 97 watching
    Myford ML7 lathe in working order. The condition good for its age with no visible signs of rust. The lathe is 3 1/2"by 20" centre lathe including built in drive unit with. The lathe has only had light...
  • Myford ML7 lathe

    Myford ML7 lathe

    with full accessories
    £480.00
    13 bids
    + £0.00 P&P
    • 98 watching
    Myford ML7 lathe, serial number K8577, with 0.33 HP single phase motor, & reversing switch. The cross and top slides are fitted with resettable micrometer dials. Two books are included - the Ian Bradl...
  • MYFORD ML7 LATHE on cbainet

    MYFORD ML7 LATHE on cbainet

    £419.00
    16 bids
    + £3.40 P&P
    • 197 watching
  • MYFORD  4 JAW CHUCK

    MYFORD 4 JAW CHUCK

    £12.50
    2 bids
    + £3.00 P&P
    • 25 watching
    A SMALL 3" DIA 4 JAW CHUCK WITH A 3/4" BAR ON THE BACK. THIS IS FOR PUTTING YOUR BIGGER CHUCK FOR VERY FINE SMALL JOBS. ADJUSTS WITH A ALLEN KEY. A VERY USEFUL BIT OF KIT.
  • myford ml7 motor 3 phase

    myford ml7 motor 3 phase

    £10.00
    1 bid
    + £10.00 P&P
    • 10 watching
    3 phase motor taken from a myford ml7 lathe, good used condition. see pics for specs
  • Myford ML7 Lathe thread cutting wheels extra accessories Single Phase

    Myford ML7 Lathe thread cutting wheels extra accessories Single Phase

    £360.00
    7 bids
    + £0.00 P&P
    • 80 watching
    ML7 lathe.. doesn't get used any more. has about 13 gear wheels with it. single phase motor. Also has a face plate not shown as I forgot to take a picture of it. Collection only.. Will help with lifti...
  • Myford ML7 Lathe

    Myford ML7 Lathe

    £310.00
    11 bids
    + £0.00 P&P
    • 76 watching
    This Lathe is imperial with a single phase motor. The bed number is K40694. It also comes with some gears which you can see laid out in the last picture. These are the ones stacked on the bed in the e...
  • Myford ML7 Lathe, Many Accessories, Lightly Used, Good Condition, Model Engineer

    Myford ML7 Lathe, Many Accessories, Lightly Used, Good Condition, Model Engineer

    £505.00
    3 bids
    + £0.00 P&P
    • 108 watching
    The serial no. is K5992 which dates it to 1948-49. We have run the lathe and the motor runs smoothly and is quiet. The condition of the lathe appears to be very good for its age with very minimal impe...
  • Myford Lathe Motor

    Myford Lathe Motor

    £42.00
    3 bids
    + £15.00 P&P
    • 32 watching
    Motor found while clearing out a late friends workshop for the estate. I have marked it as used although I don't think it every has been used. probably bought as a spare for his Myford Super 7. The la...
  • Myford ML7 Lathe

    Myford ML7 Lathe

    £520.00
    3 bids
    + £0.00 P&P
    • 38 watching
    This auction is for a Myford ML7 Lathe as seen in the pics it is in great condition and hasn't seen much work, there is also a spare chuck and lots of cutting tools, Taps and dies (Metric and imperial...
  • 2 Lathe steadies and 1 small 4 jaw chuck suit Myford ML7

    2 Lathe steadies and 1 small 4 jaw chuck suit Myford ML7

    £34.00
    3 bids
    + £20.00 P&P
    • 38 watching
    Two steadies and one small 4 jaw chuck with key suit Myford lathe
  • Lathe Tools. From myford lathe. Used

    Lathe Tools. From myford lathe. Used

    £10.00
    1 bid
    + £0.00 P&P
    • 14 watching
    Used Lathe Tools. From the drawer of a myford lathe.
  • Lathe Tools. From myford lathe. Used

    Lathe Tools. From myford lathe. Used

    £10.00
    1 bid
    + £0.00 P&P
    • 10 watching
    Used Lathe Tools. From the drawer of a myford lathe.
  • Lathe Tools. From myford lathe. Used

    Lathe Tools. From myford lathe. Used

    £10.00
    1 bid
    + £0.00 P&P
    Used Lathe Tools. From the drawer of a myford lathe.
  • Myford/  31/2 'M' type lathe

    Myford/  31/2 'M' type lathe

    £156.22
    18 bids
    + £0.00 P&P
    • 117 watching
    Myford 3 1/2 M Type lathe in good working condition with 240 volt motor. The lathe is on a myford stand and can be unbolted from the stand for ease of transport.
  • Myford ML7 Super 7 Lathe Lever Action Collet Chuck & Hardinge MA99E Collet Set

    Myford ML7 Super 7 Lathe Lever Action Collet Chuck & Hardinge MA99E Collet Set

    £150.00
    Buy it now
    or Best Offer
    + £10.00 P&P
    • 11 watching
    Original myford collet chuck with lever action quick closer mechanism Threaded for myford ML7 / super 7 spindle. 15x Hardinge MA99E collets 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/...
  • Dividing head Myford ML7 Super 7 lathe

    Dividing head Myford ML7 Super 7 lathe

    £95.00
    1 bid
    + £12.95 P&P
    • 46 watching
    Myford super 7 dividing head with one plate. Buyer can pay on collection if needed.
  • Genuine Myford Dividing head with plates & tailstock suit Model engineer lathe

    Genuine Myford Dividing head with plates & tailstock suit Model engineer lathe

    £98.00
    1 bid
    + £13.75 P&P
    • 38 watching
    A used Myford dividing head in good condition with 2 plates.
  • Myford Lathe (believed to be ML7) on cabinet and various accessories

    Myford Lathe (believed to be ML7) on cabinet and various accessories

    £450.00
    0 bids
    + £0.00 P&P
    • 14 watching
    Myford Metal Working Lathe on cabinet, believe it is a ML7. Various associated tools and parts as in photographs. Expected condition for age and use.
  • myford super 7 lathe

    myford super 7 lathe

    £1,021.00
    2 bids
    + £0.00 P&P
    • 42 watching
    Three and four jawed chuck. As you can see from the photos, this machine has some light surface rust, but nothing that cant be removed with a good clean. self indexing turret.
  • Myford ML7 Lathe with long cross-slide, vertical slide and other accessories

    Myford ML7 Lathe with long cross-slide, vertical slide and other accessories

    £321.00
    3 bids
    + £0.00 P&P
    • 128 watching
    As can be seen in the pictures, it comes with a long cross-slide with variable angle tool slide fitted with a rotating multi-tool holder. An alternative, height-adjustable tool holder, which mounts di...
  • Myford ML 7, metalworking lathe. In good working order with some accessories

    Myford ML 7, metalworking lathe. In good working order with some accessories

    £310.00
    2 bids
    + £0.00 P&P
    • 103 watching
    A standard ML7 Lathe. Has obviously had some good use in its long life, but is still in good condition. For sale is the lathe and some accessories only. NO STAND. Motor is 1/2 HP Single Phase. It has ...
  • Myford Super 7 Lathe Oil Drip Feed

    Myford Super 7 Lathe Oil Drip Feed

    £7.50
    5 bids
    + £3.99 P&P
    • 41 watching
    2 original drip feed oil units by Myford. Both units have a hairline crack in the plastic dome. I don’t know if this causes issues with leaking oil. They may be able to be fixed. Thanks for your inter...
  • Myford vertical slide for milling in the lathe

    Myford vertical slide for milling in the lathe

    £40.00
    1 bid
    + £12.00 P&P
    • 51 watching
    Genuine Myford vertical slide, part no. MA68, table size 4" x 5". In good condition.
  • Myford ML7 Lathe (1963 serial) and Cabinet

    Myford ML7 Lathe (1963 serial) and Cabinet

    £550.00
    0 bids
    + £0.00 P&P
    Machine is sold as seen.