Promoted item:8 TON AIR HYDRAULIC LONG RAM CYLINDER PNEUMATIC OR MANUAL OPERATION

8 TON AIR HYDRAULIC LONG RAM CYLINDER PNEUMATIC OR MANUAL OPERATION

    • 9 watching
    • |
    • 1 sold
  • With pneumatic or maual operation . Has many uses including 2 ton engine crane. Pump out this long piston effortlessly. Supplied also with handle for manual operation if needed.
  • Condition
  • New
  • Time left
  • 17d 1h 24m
  • Postage
  • £7.00
  • Sold by
  • 100% Positive Feedback

Items in search results

Smc air actuated ram not sure about all the details unit is new as it was bought by my late father in law for a project that never happened but has no box and has been sitting in his shed for a while ...
11h 55m left
£20.00
0 bids
£35.00
Buy it now
+ £10.00 P&P
3 rams in good working order removed from woodworking machine.
25d 10h 11m left
£50.00
Buy it now
  • 30 watching
  • |
  • 1 sold
Also available:ISO VDMA Pneumatic Cylinders built to order, usually within one day. Constructed from Bosch Rexroth common parts, stainless steel piston rods. Bore sizes available from 32mm - 200mm, st...
17d 13h 4m left
£14.99
Buy it now
+ £8.95 P&P
New, out of packaging.
18d 23h 14m left
£22.00
Buy it now
+ £5.00 P&P
This item is being sold by eBay Top rated seller.
Cetop rp 43 p 100 9110000' Parker Schrader Bellows double acting pneumatic cylinder. 60 mm stroke. 10 bar maximum pressure. Used but in good condition. Any sensible offers considered.
14h 20m left
£45.00
Buy it now
or Best Offer
Free P&P
  • 4 watching
This is a pneumatic cylinder with 8mm diameter bore and stroke length of 100mm. It also has 2x magnetic sensors fitted for stroke signal. These are 24v d.c. It has 2x flow restrictors fitted and also ...
7d 19h 13m left
£50.00
Buy it now
Free P&P
  • 8 watching
Used vdma cylinder -50x50m. Interchange with ISO 6431 VDMA 24562. Attractive Cleanline Cylinder. Untitled Document the saw centre. Untitled Document. Takes Low Profile Magnetic Sensors.
6d 16h 49m left
£28.00
Buy it now
or Best Offer
+ £15.00 P&P
This item is being sold by eBay Top rated seller.
Connection form 2 direction and 3-type fixing (pierced hole bolt, back tapped hole, bottom tapped hole) and the miniature sensor switch recessed in the cylinder body. Untitled Document.
6d 12h 42m left
£40.00
Buy it now
or Best Offer
Free P&P
This is a pneumatic cylinder with 8mm diameter bore and stroke length of 200mm. It has 2x flow restrictors fitted and also comes with mounting bracket. Used as part of a now redundant project.
7d 19h 13m left
£40.00
Buy it now
Free P&P
Brand new. As seen on the photo. The body is 80 x 80mm with 10 mm stroke, 1/4 BSP inlet. Capable of taking high pressure as I used them @ 180BAR but I'm sure would take more than that.
1d 13h 25m left
£18.00
0 bids
+ £10.00 P&P
24d 18h 26m left
£59.00
Buy it now
+ £5.50 P&P
Chicago Cylinder Corp D-02278 Air Ram. Ryko part no# 15065-005
23d 16h 29m left
£40.00
Buy it now
+ £5.50 P&P
This is a pneumatic cylinder with 8mm diameter bore and stroke length of 125mm. It has 2x flow restrictors fitted and also comes with mounting bracket. Used as part of a now redundant project.
7d 19h 13m left
£40.00
Buy it now
Free P&P
Unlike many other sellers we don't charge you for the time taken to wrap things up.
22d 19h 58m left
£15.00
Buy it now
or Best Offer
+ £5.00 P&P
CODE :KA-12X100-S-CA ISO 6432 Stainless Steel Mini Cylinder - 100mm Stroke - 12mm Bore - Closed Length 191mm. Air Pneumatic Cylinder - Double Acting - Cushioned End of Stroke - Magnetic for Reed Switc...
22d 10h 8m left
£29.88
Buy it now
+ £4.45 P&P
  • 5 watching
  • |
  • 7 sold
CODE : F-M1 2 125YI Piston Rod End Fork Clevis Mount - ISO 1555 2 Mini Cylinder. Size - Thread M 1 2 x 1 . 25 - Pin Hole 1 2 mm I/D - L 25.4 x W 25.4 mm - Overall Length 6 2mm.
11d 15h 41m left
£9.43
Buy it now
+ £3.03 P&P
9d 18h 39m left
£10.53
Buy it now
+ £1.63 P&P
  • 5 watching
4d 12h 20m left
£24.55
Buy it now
+ £4.45 P&P
  • 12 watching
  • |
  • 2 sold
CODE :F-KA8SDB Rear Hinge Mounting - ISO 6432 Mini Cylinder. For 8 10mm Bore Cylinders. Size - 2 x M4 Mount Holes. Steel Plated Body with Clevis Bolt.
9d 19h 50m left
£4.93
Buy it now
+ £3.03 P&P
Hi welcome to my listing for a job lot of pneumatic equipment. Left over from when i used to make animatronic models. There are approx 80-100 pneumatic fittings from 4 to 12mm.
3d 21h 30m left
£45.00
0 bids
+ £12.00 P&P
8d 3h 32m left
£23.95
Buy it now
+ £4.45 P&P
Model: dsw-63-bo-ppva-b. MAX: 10 BAR 14/PSI stroke is 80mm and dia of ram is 20mm , overall it is 300mm long and 70mm dia. See photo's. You can view before purchase. Dskkitchens@aol.com.
20d 23h 13m left
£35.00
Buy it now
+ £11.00 P&P
  • 4 watching
For20 25mm Bore Cylinders. CODE :F-KA 20 LB Pair of Foot Mountings - ISO 6432 Mini Cylinder. Steel Plated Bracket. Size - 2 x M6Mount Holes each Bracket. L Bracket 26.6x65mm.
10d 14h 14m left
£4.65
Buy it now
+ £2.60 P&P
  • 20 watching
  • |
  • 6 sold
9d 21h 59m left
£5.53
Buy it now
+ £1.03 P&P
For12 16mm Bore Cylinders. CODE :F-KA 12 LB Pair of Foot Mountings - ISO 6432 Mini Cylinder. Steel Plated Bracket. Size - 2 x M5Mount Holes each Bracket. L Bracket 20 x 33mm.
10d 13h 57m left
£4.33
Buy it now
+ £3.03 P&P
  • 15 watching
  • |
  • 13 sold
CODE :F-M06100II Piston Rod End Fork Clevis Mount - ISO 6432 Mini Cylinder. For 12 16mm Bore Cylinders. Forged Steel Plated Body. Size - Thread M6x1.0 - Pin Hole 5mm I/D - Overall Length 28mm.
19d 10h 40m left
£5.53
Buy it now
+ £1.33 P&P
  • 3 watching
  • |
  • 1 sold
CODE :NBM10F1 1 Off Clevis Pin. Ideal use for with Hydraulic and Pneumatic Rams. Body 10mm Diameter x Length Head to Groove 20mm - Head 14mm Diameter - Overall length 27mm.
11d 1h 1m left
£6.43
Buy it now
+ £1.03 P&P
11d 1h 23m left
£4.23
Buy it now
+ £1.03 P&P
  • 3 watching
CODE :DEM25F1 1 Off Clevis Pin. Body 25mm Diameter x Length 50mm - Spigot 16mm Diameter - Overall length 66mm. Ideal use for with Hydraulic and Pneumatic Rams.
11d 0h 4m left
£8.75
Buy it now
+ £3.80 P&P