Skip to main content

Q.Max Sheet Metal Punch - 24mm

  • £10.90
  • Buy it now
  • Free P&P
    • 4 watching
    • |
    • 6 sold
View details
Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
Condition:New
Time left:13d 2h 12m
Sold by:
  • Q.Max Sheet Metal Punch - 22.5mm

    Q.Max Sheet Metal Punch - 22.5mm

    £10.62
    Buy it now
    Free P&P
    Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
  • Q-Max QMA20M Q.max Sheet Metal Hole Punch 20mm

    Q-Max QMA20M Q.max Sheet Metal Hole Punch 20mm

    £8.16
    Buy it now
    + £3.50 P&P
    • 21 watching
    • |
    • 56 sold
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q-Max QMA25M Q.max Sheet Metal Hole Punch 25mm

    Q-Max QMA25M Q.max Sheet Metal Hole Punch 25mm

    £8.48
    Buy it now
    + £3.50 P&P
    • 21 watching
    • |
    • 46 sold
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q.Max Sheet Metal Punch - 10mm

    Q.Max Sheet Metal Punch - 10mm

    £10.47
    Buy it now
    Free P&P
    Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
  • Q-Max QMA40M Q.max Sheet Metal Hole Punch 40mm

    Q-Max QMA40M Q.max Sheet Metal Hole Punch 40mm

    £15.10
    Buy it now
    + £3.50 P&P
    • 16 watching
    • |
    • 20 sold
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q-Max QMA35M Q.max Sheet Metal Hole Punch 35mm

    Q-Max QMA35M Q.max Sheet Metal Hole Punch 35mm

    £10.96
    Buy it now
    + £3.50 P&P
    • 4 watching
    • |
    • 12 sold
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q.Max Sheet Metal Punch Hole Punch - 17.5 mm

    Q.Max Sheet Metal Punch Hole Punch - 17.5 mm

    £12.65
    Buy it now
    + £2.00 P&P
    • 25 watching
    • |
    • 66 sold
    A quick and easy way to cut clean holes in sheet metal up to 16 gauge. Special design allows even load during cutting and produces a burr free hole that needs no extra finishing.
  • Q-Max QMA16M Q.max Sheet Metal Hole Punch 16mm

    Q-Max QMA16M Q.max Sheet Metal Hole Punch 16mm

    £7.24
    Buy it now
    + £3.50 P&P
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q.Max QMA186M Sheet Metal Punch 18.6mm

    Q.Max QMA186M Sheet Metal Punch 18.6mm

    £12.24
    Buy it now
    Free P&P
    A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. Drill Bits &. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position...
  • Q.Max QMA12 Sheet Metal Punch - 1/2in

    Q.Max QMA12 Sheet Metal Punch - 1/2in

    £11.74
    Buy it now
    Free P&P
    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then ont...
  • Q.Max Sheet Metal Punch - 34mm

    Q.Max Sheet Metal Punch - 34mm

    £12.57
    Buy it now
    Free P&P
    Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
  • Q.Max QMA10M Sheet Metal Punch 10mm

    Q.Max QMA10M Sheet Metal Punch 10mm

    £9.99
    Buy it now
    Free P&P
    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw unti...
  • Q-Max QMA225M Q.max Sheet Metal Hole Punch 22.5mm

    Q-Max QMA225M Q.max Sheet Metal Hole Punch 22.5mm

    £8.34
    Buy it now
    + £3.50 P&P
    Single Board Computers & Microcontrollers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild steel. Wall Controll...
  • Q.Max Sheet Metal Punch Hole Punch - 20.0 mm

    Q.Max Sheet Metal Punch Hole Punch - 20.0 mm

    £14.65
    Buy it now
    + £3.00 P&P
    • 116 watching
    • |
    • 208 sold
    A quick and easy way to cut clean holes in sheet metal up to 16 gauge. NB: Sale is for one ROUND Hole Punch. Special design allows even load during cutting and produces a burr free hole that needs no ...
  • Q.Max Sheet Metal Punch - 11/16in

    Q.Max Sheet Metal Punch - 11/16in

    £10.77
    Buy it now
    Free P&P
    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the Allen Screw) then the Die and Allen screw are threaded through the sheet metal then onto the d...
  • Q.Max QMA765M Sheet Metal Punch - 76.5mm

    Q.Max QMA765M Sheet Metal Punch - 76.5mm

    £83.05
    Buy it now
    Free P&P
    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw unti...
  • Q.Max Sheet Metal Punch - 29mm

    Q.Max Sheet Metal Punch - 29mm

    £11.40
    Buy it now
    Free P&P
    Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
  • Q-Max M12 RACE+60MM BOLT Q.Max Thrust Race For Punches

    Q-Max M12 RACE+60MM BOLT Q.Max Thrust Race For Punches

    £7.70
    Buy it now
    + £3.50 P&P
    • 1 watching
    • |
    • 1 sold
    Show Menu. Close Sub Menu. Fuses & Circuit Breakers. Wireless System & Modules. Punch thrust race suitable for use with 32.5 to 37.5mm Q-max sheet metal punches. After the Inspection Period has expire...
  • Q.Max Sheet Metal Punch - 48mm

    Q.Max Sheet Metal Punch - 48mm

    £20.42
    Buy it now
    Free P&P
    Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
  • Q.Max QMA64M Sheet Metal Punch 64mm

    Q.Max QMA64M Sheet Metal Punch 64mm

    £43.33
    Buy it now
    Free P&P
    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw unti...
  • Q.Max Sheet Metal Punch Hole Punch - 30.0 mm

    Q.Max Sheet Metal Punch Hole Punch - 30.0 mm

    £15.50
    Buy it now
    + £3.95 P&P
    • 39 watching
    • |
    • 79 sold
    A quick and easy way to cut clean holes in sheet metal up to 16 gauge. Special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Size.30.0 mm.
  • Q.Max Sheet Metal Punch - 31mm

    Q.Max Sheet Metal Punch - 31mm

    £11.92
    Buy it now
    Free P&P
    Thread the punch onto the Allen screw and then pass the Allen screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting Allen screw until it touches...
  • Q-Max QMA15M Q.max Sheet Metal Hole Punch 15mm

    Q-Max QMA15M Q.max Sheet Metal Hole Punch 15mm

    £7.24
    Buy it now
    + £3.50 P&P
    • 5 watching
    • |
    • 5 sold
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q.Max QMASQ19 Square Sheet Metal Punch - 19mm

    Q.Max QMASQ19 Square Sheet Metal Punch - 19mm

    £57.65
    Buy it now
    Free P&P
    A quick and easy way to cut clean square holes in sheet metal up to 16 gauge. Zone 4 - Bulgaria, Estonia, Italian Islands, Latvia, Lichenstein, Macedonia, Serbia. Goods under £150 - £32.95 Goods over ...
  • Q.Max Sheet Metal Punch - 1/2in

    Q.Max Sheet Metal Punch - 1/2in

    £10.64
    Buy it now
    Free P&P
    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the Allen Screw) then the Die and Allen screw are threaded through the sheet metal then onto the d...
  • Q.Max Sheet Metal Punch - 1.1/2in

    Q.Max Sheet Metal Punch - 1.1/2in

    £14.84
    Buy it now
    Free P&P
    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the Allen Screw) then the Die and Allen screw are threaded through the sheet metal then onto the d...
  • Q-Max 54MM Sheet Metal Hole Punch

    Q-Max 54MM Sheet Metal Hole Punch

    £23.22
    Buy it now
    + £3.50 P&P
    • 6 watching
    • |
    • 3 sold
    Single Board Computers & Microcontrollers. Wall Controllers. This hand-operatedsheet metal punch fromQ-Max provides the easiest and quickest way of punching holes in sheet metal up to 16 gauge mild st...
  • Q.Max QMA21M Sheet Metal Punch - 21mm

    Q.Max QMA21M Sheet Metal Punch - 21mm

    £13.05
    Buy it now
    Free P&P
    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw unti...
  • Q.Max QMA19M Sheet Metal Punch - 19mm

    Q.Max QMA19M Sheet Metal Punch - 19mm

    £12.40
    Buy it now
    Free P&P
    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw unti...