Skip to main content

Veritas Mk.II Honing System Guide 200810 Three bevel-angle range 05M09.01

  • £42.63
  • Buy it now
  • Free P&P
    • 422 watching
    • |
    • 582 sold
View details
The 50mm wide roller is stable for even the narrowest of blades. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades. Increased rang...
Condition:New
Time left:26d 23h 10m
Sold by:
This item is being sold by an eBay Top-rated seller.
  • Veritas 5 Piece Deluxe Mk.II Honing Guide Set 101262 05M09.20

    Veritas 5 Piece Deluxe Mk.II Honing Guide Set 101262 05M09.20

    £99.37
    Buy it now
    Free P&P
    • 106 watching
    • |
    • 47 sold
    The most versatile Veritas honing guide set to date. Combined the heads accept blades ranging from 3mm(1/8") to 73mm(2.7/8") wide. Most versatile Veritas honing guide set. 5 piece set includes standar...
  • Veritas Wheel Marking Gauge Imperial Micro Adjustment 475131 05N35.20 / RDGTools

    Veritas Wheel Marking Gauge Imperial Micro Adjustment 475131 05N35.20 / RDGTools

    £32.00
    Buy it now
    Free P&P
    There are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter and, even then, the pin tends to follow the wood grain, throwing off your line. The Verita...
  • Veritas Lapping Plate 210555 300 x 104 x 28mm 05M20.20

    Veritas Lapping Plate 210555 300 x 104 x 28mm 05M20.20

    £72.47
    Buy it now
    Free P&P
    • 120 watching
    • |
    • 16 sold
    For fingertip safety, the channels have been chamfered to eliminate sharp edges and corners. Not intended for heavy material removal, it is designed to condition or smooth previously ground surfaces a...
  • Veritas Small Router Plane AP 701934 / 05P38.50 6.3mm Wide Steel Blade RDGTools

    Veritas Small Router Plane AP 701934 / 05P38.50 6.3mm Wide Steel Blade RDGTools

    £39.99
    Buy it now
    Free P&P
    • 61 watching
    • |
    • 10 sold
    The plane is 82.5mm(3.1/4") wide and 57mm(2.1/4") deep, with a 6.35mm(1/4") wide high-carbon steel blade. The blade may be positioned inboard for standard closed-throat use, or outboard, where the cut...
  • Veritas Wheel Marking Gauges Standard Non Marking 475382 05N33.21

    Veritas Wheel Marking Gauges Standard Non Marking 475382 05N33.21

    £24.18
    Buy it now
    Free P&P
    • 334 watching
    • |
    • 308 sold
    There are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter and, even then, the pin tends to follow the wood grain, throwing off your line. The Verita...
  • Veritas Mk.II Honing System Guide Three bevel-angle range 05M09.01 200810 RDG

    Veritas Mk.II Honing System Guide Three bevel-angle range 05M09.01 200810 RDG

    £44.93
    Buy it now
    Free P&P
    • 65 watching
    • |
    • 20 sold
    MK.II HONING SYSTEM. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades. Increased range, capacity and accuracy.
  • Veritas Hand Beading Tool 210935 05P04.50

    Veritas Hand Beading Tool 210935 05P04.50

    £57.56
    Buy it now
    Free P&P
    • 146 watching
    • |
    • 27 sold
    Hand beading, fluting or reeding in hard or soft woods is an easy matter with our new beading tool. Cutters are held against the body with a clamping bar and are adjustable for height and fence offset...
  • Veritas Mk.II 3 Piece Narrow Blade Honing Guide Set 101257 05M09.10

    Veritas Mk.II 3 Piece Narrow Blade Honing Guide Set 101257 05M09.10

    £65.51
    Buy it now
    Free P&P
    The guide clamps blades from 3mm(1/8") to 38mm(1.1/2") wide. The specially designed parallel jaws ensure your blades stay square to the jig. The jig takes blades with bevelled or square edges. The can...
  • Veritas Dovetail Saw Guide System 717028 1:8 Angle 14° Guide With Saw

    Veritas Dovetail Saw Guide System 717028 1:8 Angle 14° Guide With Saw

    £54.58
    Buy it now
    Free P&P
    • 232 watching
    • |
    • 121 sold
    The Veritas dovetail guide clamps in position and holds the saw at the correct place and angle for a perfect cut. Rare-earth magnets are embedded in the anodized aluminum guide and are covered with a ...
  • Veritas Transfer Scribe 202391 Veritas Log Scribe Scriber 05U05.01

    Veritas Transfer Scribe 202391 Veritas Log Scribe Scriber 05U05.01

    £72.79
    Buy it now
    Free P&P
    • 450 watching
    • |
    • 162 sold
    Made from aluminium alloy with brass fittings, the Transfer Scribe comes with a double ended steel guide pin. The pin has a pointed end for compass work and a rounded curved end for smooth scribing.
  • Veritas Cabinet Scraper Brand New 474843

    Veritas Cabinet Scraper Brand New 474843

    £52.48
    Buy it now
    Free P&P
    The Veritas Cabinet Scraper can be used to smooth glue lines or surfaces such as panels and table tops, or where there is tricky grain, without tear out, digs or gouges. The sole is longer and the han...
  • Veritas mk2 honing guide for plane and chisel blades

    Veritas mk2 honing guide for plane and chisel blades

    £78.00
    22 bids
    + £5.00 P&P
    • 36 watching
    This is a auction for the veritas mk2 honing guide it comes with the attachment for narrow blades such as chisels. There are also 2 double sided whetstones included thet are 220, 800, 3000 and 6000 gr...
  • Veritas 6 Fore Plane - Boxed and Unused. A1 & O2 blades

    Veritas 6 Fore Plane - Boxed and Unused. A1 & O2 blades

    £219.95
    Buy it now
    or Best Offer
    Free P&P
    • 13 watching
    Supplied with two blades: A1 & O2. Veritas #6 Fore Plane.
  • Veritas Rip Cut Carcass Saw 12tpi 950979

    Veritas Rip Cut Carcass Saw 12tpi 950979

    £45.00
    Buy it now
    + £3.00 P&P
    The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along t...
  • Veritas Bevel Gauge 477398 50K09.01

    Veritas Bevel Gauge 477398 50K09.01

    £11.99
    Buy it now
    Free P&P
    • 92 watching
    • |
    • 206 sold
    Half the battle when sharpening is getting the bevel angle correct. A good bevel gauge is truly handy for quickly checking the grind angle of chisels, plane blades, turning tools, etc. A quick check c...
  • Veritas Detail Rebate Planes Different Sizes

    Veritas Detail Rebate Planes Different Sizes

    £55.59
    Buy it now
    Free P&P
    As an addition to the Veritas range of shoulder planes, the detail rebate plane is primarily useful for small trimming tasks. It is handy for getting into tight spaces, especially cleaning up the bott...
  • Veritas Honing Compound 477070 05M08.01

    Veritas Honing Compound 477070 05M08.01

    £111.43
    Buy it now
    Free P&P
    • 80 watching
    • |
    • 214 sold
    Ideal for honing hardened steel blades, use on your chosen honing block/strop, felt, leather or wood. It is primarily aluminum oxide blended with other fine abrasives to give the best combination of c...
  • Veritas Square Fence 475961 05N54.01

    Veritas Square Fence 475961 05N54.01

    £18.20
    Buy it now
    Free P&P
    • 107 watching
    • |
    • 44 sold
    A carpenter's square is frequently needed just because of its size. The face of the square fence aligns with the edge of the workpiece while the weight of the framing square rests on the material. Fli...
  • Veritas Carpenters Gauge Metric & Imperial Readings AP475905 05N36.01

    Veritas Carpenters Gauge Metric & Imperial Readings AP475905 05N36.01

    £20.50
    Buy it now
    Free P&P
    • 193 watching
    • |
    • 117 sold
    Made to fit easily into the pocket, the carpenter's gauge combines both direct reading compass and marking gauge in one tool. The stainless steel rule is graduated with both imperial and metric scales...
  • Veritas Bevel Up Jointer Plane - Boxed and almost unused

    Veritas Bevel Up Jointer Plane - Boxed and almost unused

    £189.95
    Buy it now
    or Best Offer
    Free P&P
    • 30 watching
    Veritas Bevel Up Jointer Plane. Used for a couple of small projects.
  • Veritas Sliding Square Metric 475300 05N32.05

    Veritas Sliding Square Metric 475300 05N32.05

    £126.10
    Buy it now
    Free P&P
    Metric graduated to 100mm on sides and end to 70mm. This also simplifies working in two axes at once (e.g., measuring in 50mm and over 40mm), substantially reducing the chance of error when measuring ...
  • Veritas Miniature Shoulder Plane 952802

    Veritas Miniature Shoulder Plane 952802

    £33.17
    Buy it now
    Free P&P
    It weighs a mere 48g and measures 62mm long by 6.3mm wide it is the smallest plane Veritas have made to date. It is fully functional, comfortable to hold, easy to manoeuvre and control. A remarkably e...
  • Veritas Dovetail Saddle Marker 1:6 angle 476717 05N61.04

    Veritas Dovetail Saddle Marker 1:6 angle 476717 05N61.04

    £13.52
    Buy it now
    Free P&P
    • 83 watching
    • |
    • 72 sold
    A saddle enables you to mark a continuous line around a corner. Both straight and angled lines can be scribed simultaneously, ensuring alignment. The inside corner is relieved to ensure flush seating ...
  • Veritas Cabinet Scraper Holder 510436 05K33.01

    Veritas Cabinet Scraper Holder 510436 05K33.01

    £28.11
    Buy it now
    Free P&P
    Absorbing the heat and stress normally levied on the hands when cabinet scraping, this scraper holder made in glass reinforced nylon with brass fittings will take traditional cabinet scrapers 140 to 1...
  • Set of 3 Veritas Miniature Planes - 717151

    Set of 3 Veritas Miniature Planes - 717151

    £96.71
    Buy it now
    Free P&P
    It weighs a mere 48g and measures 62mm long by 6.3mm wide, it is the smallest plane Veritas have made to date. It is fully functional, comfortable to hold and easy to manoeuvre and control. A remarkab...
  • Veritas Flush Plane 50mm Wide 368047 05P20.01 / RDGTools

    Veritas Flush Plane 50mm Wide 368047 05P20.01 / RDGTools

    £33.99
    Buy it now
    Free P&P
    Is it a chisel?. Is it a plane?. Well, in reality it is a 50mm wide, go anywhere flush chisel with a multitude of flush trimming uses and unrestricted travel to the centre of the widest boards. Flush ...
  • Veritas Miniature Low Angle Block Plane A2 - 504079 / RDGTools

    Veritas Miniature Low Angle Block Plane A2 - 504079 / RDGTools

    £936.21
    Buy it now
    Free P&P
    • 66 watching
    • |
    • 21 sold
    Veritas Miniature Low Angle Block Plane. This version of the Veritas low angle block plane is about a third the size of the original. The low 12° bed angle combined with the 25° blade bevel gives it a...
  • Veritas Power Tenon Cutter - 2

    Veritas Power Tenon Cutter - 2" 474541 05J41.06

    £80.09
    Buy it now
    Free P&P
    The cutters are easily re-sharpened with a drum sander mounted in a drill press, using a honing guide built into each tenon cutter. Sizes 16mm(5/8"), 19mm(3/4"), 22mm(7/8") and 25mm(1") have 9.5mm(3/8...
  • Veritas Shoulder Vice Screw Shoulder Vice 475258 70G01.51 / RDGTools

    Veritas Shoulder Vice Screw Shoulder Vice 475258 70G01.51 / RDGTools

    £26.62
    Buy it now
    Free P&P
    • 63 watching
    • |
    • 8 sold
    Threaded guide mortises into the vice shoulder; end guide attaches to the vice jaw. Used to build an L-shaped shoulder vice on a Scandinavian-style workbench. Use to build an L-shaped shoulder vice on...