Skip to main content

Veritas Low Angle Jack Plane PM-V11

  • £195.00
  • Buy it now
  • Free P&P
View details
For those who haven’t tried a low angle plane it comes as something of a revelation when you get to use one. If ever you have had to plane a section of timber with interlocking grain you may have expe...
Condition:New
Time left:23d 21h 59m
Sold by:
  • Veritas Mk.II Honing System Guide 200810 Three bevel-angle range 05M09.01

    Veritas Mk.II Honing System Guide 200810 Three bevel-angle range 05M09.01

    £43.99
    Buy it now
    Free P&P
    • 451 watching
    • |
    • 637 sold
    The 50mm wide roller is stable for even the narrowest of blades. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades. Increased rang...
  • Veritas Scrub Plane (A2 Blade)

    Veritas Scrub Plane (A2 Blade)

    £95.00
    Buy it now
    Free P&P
    Much like a low-angle smooth plane, a scrub is not usually used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 75mm(3") radius, so that it takes an aggressive c...
  • Veritas Flush Plane 50mm Wide 368047

    Veritas Flush Plane 50mm Wide 368047

    £37.17
    Buy it now
    Free P&P
    • 93 watching
    • |
    • 58 sold
    Is it a chisel?. Is it a plane?. Well, in reality it is a 50mm(2") wide, go anywhere flush chisel with a multitude of flush trimming uses and unrestricted travel to the centre of the widest boards. Im...
  •  VERITAS Low Angle JACK  PLANE  Little Used

    VERITAS Low Angle JACK PLANE Little Used

    £160.00
    34 bids
    + £2.90 P&P
    • 53 watching
    I bought this for a project whilst I was at Uni, it has had very little use and is in good condition.
  • Veritas Miniature Shoulder Plane 952802

    Veritas Miniature Shoulder Plane 952802

    £37.17
    Buy it now
    Free P&P
    It weighs a mere 48g and measures 62mm long by 6.3mm wide it is the smallest plane Veritas have made to date. It is fully functional, comfortable to hold, easy to manoeuvre and control. A remarkably e...
  • Veritas No.6 Fore Plane

    Veritas No.6 Fore Plane

    £102.00
    16 bids
    + £2.90 P&P
    • 49 watching
  • Veritas Transfer Scribe 202391 Veritas Log Scribe Scriber 05U05.01 / RDGTools

    Veritas Transfer Scribe 202391 Veritas Log Scribe Scriber 05U05.01 / RDGTools

    £93.11
    Buy it now
    Free P&P
    • 104 watching
    • |
    • 34 sold
    Made from aluminium alloy with brass fittings, the Transfer Scribe comes with a double ended steel guide pin. TRANSFER SCRIBE. Bi-directional level bubbles help guide the user and ensure the scribe is...
  • Veritas Wheel Marking Gauges Standard Non Marking 475382 05N33.21

    Veritas Wheel Marking Gauges Standard Non Marking 475382 05N33.21

    £25.18
    Buy it now
    Free P&P
    • 371 watching
    • |
    • 352 sold
    There are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter and, even then, the pin tends to follow the wood grain, throwing off your line. The Verita...
  • Veritas Honing Compound 477070 05M08.01

    Veritas Honing Compound 477070 05M08.01

    £11.23
    Buy it now
    Free P&P
    • 87 watching
    • |
    • 222 sold
    Ideal for honing hardened steel blades, use on your chosen honing block/strop, felt, leather or wood. It is primarily aluminum oxide blended with other fine abrasives to give the best combination of c...
  • Veritas Wile Plane Hammer 50K56.05 DT705704

    Veritas Wile Plane Hammer 50K56.05 DT705704

    £69.17
    Buy it now
    Free P&P
    Delicate, elegantly designed hammer for precisely adjusting plane blades without damaging the material. The maple hammer head is slightly rounded, allowing the force of the blow to be optimally distri...
  • Veritas Wheel Marking Gauge Imperial Micro Adjustment 475131 05N35.20 / RDGTools

    Veritas Wheel Marking Gauge Imperial Micro Adjustment 475131 05N35.20 / RDGTools

    £35.03
    Buy it now
    Free P&P
    There are two main problems with a typical marking gauge: you have to tilt it just right to avoid pin chatter and, even then, the pin tends to follow the wood grain, throwing off your line. The Verita...
  • Veritas Lapping Plate 210555 300 x 104 x 28mm 05M20.20

    Veritas Lapping Plate 210555 300 x 104 x 28mm 05M20.20

    £82.17
    Buy it now
    Free P&P
    • 120 watching
    • |
    • 18 sold
    For fingertip safety, the channels have been chamfered to eliminate sharp edges and corners. Not intended for heavy material removal, it is designed to condition or smooth previously ground surfaces a...
  • Veritas Grinder Tool Rest  600320 05M23.01

    Veritas Grinder Tool Rest 600320 05M23.01

    £43.17
    Buy it now
    Free P&P
    This tool rest is designed for mounting directly to the bench in front of either a 150mm(6") or 200mm(8") bench grinder. In the face of the rest there is a slot into which the optional grinding jig (M...
  • Veritas Solid Bronze Edge-Trimming Plane MkII

    Veritas Solid Bronze Edge-Trimming Plane MkII

    £90.00
    0 bids
    + £6.50 P&P
    Veritas solid bronze Edge-Trimming Plane MkII.Still new in box.Quality item.Will send to UK only or can be collected from Acton,London W3.
  • Veritas Dovetail Saw Guide System 717028 1:8 Angle 14° Guide With Saw

    Veritas Dovetail Saw Guide System 717028 1:8 Angle 14° Guide With Saw

    £54.58
    Buy it now
    Free P&P
    • 257 watching
    • |
    • 132 sold
    The Veritas dovetail guide clamps in position and holds the saw at the correct place and angle for a perfect cut. Rare-earth magnets are embedded in the anodized aluminum guide and are covered with a ...
  • Veritas Optical Centre Punch 475156 05N59.01

    Veritas Optical Centre Punch 475156 05N59.01

    £35.17
    Buy it now
    Free P&P
    • 79 watching
    • |
    • 115 sold
    Extremely accurate, this optical centre punch simplifies the procedure of quickly finding and centre-punching a workpiece. The Veritas optical centre punch simplifies this and increases accuracy. To a...
  • Blade for Veritas Small Router Plane 701935

    Blade for Veritas Small Router Plane 701935

    £12.47
    Buy it now
    Free P&P
    High-carbon steel blade. 6.35mm(1/4") wide high-carbon steel blade. Key Features.
  • Veritas Dovetail Saddle Marker 1:6 angle 476717 05N61.04

    Veritas Dovetail Saddle Marker 1:6 angle 476717 05N61.04

    £13.52
    Buy it now
    Free P&P
    • 91 watching
    • |
    • 78 sold
    A saddle enables you to mark a continuous line around a corner. Both straight and angled lines can be scribed simultaneously, ensuring alignment. The inside corner is relieved to ensure flush seating ...
  • Veritas Sliding Square Metric 475300 05N32.05

    Veritas Sliding Square Metric 475300 05N32.05

    £28.17
    Buy it now
    Free P&P
    This also simplifies working in two axes at once (e.g., measuring in 50mm and over 40mm), substantially reducing the chance of error when measuring and marking two dimensions.The stainless steel blade...
  • Veritas Power Tenon Cutter - 1.1/2

    Veritas Power Tenon Cutter - 1.1/2" 474551 05J41.05

    £84.17
    Buy it now
    Free P&P
    The cutters are easily re-sharpened with a drum sander mounted in a drill press, using a honing guide built into each tenon cutter. Sizes 16mm(5/8"), 19mm(3/4"), 22mm(7/8") and 25mm(1") have 9.5mm(3/8...
  • Veritas Dual Marking Gauge AP952906

    Veritas Dual Marking Gauge AP952906

    £48.87
    Buy it now
    Free P&P
    With two independently adjustable rods, this gauge can scribe both sides of a mortice at once. The length of each ground stainless-steel rod is very precise. Projection is easy to set, an internal O-r...
  • Veritas Bevel Gauge 477398 50K09.01 / RDGTools

    Veritas Bevel Gauge 477398 50K09.01 / RDGTools

    £7.18
    Buy it now
    Free P&P
    The Veritas bevel gauge has seven individual slots that will measure the most commonly used angles from 15° to 45° in 5° increments. A good bevel gauge is truly handy for quickly checking the grind an...
  • Veritas Transfer Scribe 202391 Veritas Log Scribe Scriber 05U05.01

    Veritas Transfer Scribe 202391 Veritas Log Scribe Scriber 05U05.01

    £194.17
    Buy it now
    Free P&P
    • 446 watching
    • |
    • 173 sold
    Made from aluminium alloy with brass fittings, the Transfer Scribe comes with a double ended steel guide pin. The pin has a pointed end for compass work and a rounded curved end for smooth scribing.
  • Veritas Jointer & Edger 600304 05M07.01

    Veritas Jointer & Edger 600304 05M07.01

    £16.19
    Buy it now
    Free P&P
    • 85 watching
    • |
    • 45 sold
    Faulty item will be dealt with in accordance with manufacturers warranty.
  • Veritas Right Angle Saw Guide 202387 05T04.01

    Veritas Right Angle Saw Guide 202387 05T04.01

    £38.80
    Buy it now
    Free P&P
    Manufactured using precision machined aluminium extrusion with brass fittings. The reference surface is embedded with a 19mm rare earth magnet and covered with a low friction UHMW pad. The magnets kee...
  • Veritas Chair Doctor Glue Pro Kit 114ml 510451 05K99.04 / RDGTools

    Veritas Chair Doctor Glue Pro Kit 114ml 510451 05K99.04 / RDGTools

    £12.01
    Buy it now
    Free P&P
    If a chair has a loose rung an injection of Chair Doctor Glue will first swell the rung and then bond it in position. Available as a 57ml(2fl. oz) bottle or the Pro Kit which contains 114ml(4fl. oz) o...
  • Veritas Mk.II Honing System Guide Three bevel-angle range 05M09.01 200810 RDG

    Veritas Mk.II Honing System Guide Three bevel-angle range 05M09.01 200810 RDG

    £52.88
    Buy it now
    Free P&P
    • 81 watching
    • |
    • 50 sold
    MK.II HONING SYSTEM. The guide can easily accommodate chisels or blades from 6 to 72mm wide and up to 13mm thick including spokeshave blades. Increased range, capacity and accuracy.
  • Veritas Set of 7 Auger Gimlets 476739 33J20.01

    Veritas Set of 7 Auger Gimlets 476739 33J20.01

    £16.17
    Buy it now
    Free P&P
    • 61 watching
    • |
    • 75 sold
    Ideal for starting screws, auger gimlets have a tapered screw tip and an auger body. The seven sizes in the set range from 2mm to 5mm (5/64" to just over 3/16"), which will handle the pre-drill for sc...
  • Veritas Miniature Router Plane 952975

    Veritas Miniature Router Plane 952975

    £42.17
    Buy it now
    Free P&P
    • 66 watching
    • |
    • 37 sold
    This 75mm wide router plane not only looks like its full-size counterpart, it works like it too. Comfortable to hold and manoeuvre, it is ideal for hardware installation, fine inlay or intarsia work.