3M Cabon Fibre Vinyl (DI-NOC) Fitting

Like if this guide is helpful
This stuff is great, easy to use and can be put on pretty much any smooth surface.

First you need to prepare the surface you are going to apply the vinyl to, you will need to remove all dirt and grease, this can be done with something like window cleaner.

Once your surface is clean, take the backing off the the vinyl and place lightly on the surface. Make sure you have enough vinyl to cover the piece you are trying to cover.

Now you need to smooth the vinyl out, start from the centre and work your way to the edge. If you have a smooth flat surface, this should be easy, but like most things new, they have slight curves and things in.

To get around this, you will need to use a hair dryer to heat up the vinyl and stretch around the corner.

I will add a video and pictures soon.
Have something to share, create your own guide... Write a guide
Explore more guides