ABS Reluctor Ring Fitting Guide - The ABS Specialists

Like if this guide is helpful

The Largest Range of ABS Reluctor Rings in the world - The ABS Specialists at UK Parts Direct

Over 1000 Vehicle Models covered and growing on the UK Parts Direct website.....
Click to view our range of ABS Reluctor Rings on eBay
If we do not list the ring you require on eBay, please call us on +44(0)1380 800801 - this is just a small selection of our range.....
Here is our ABS Reluctor Ring Best Practice Fitting Guide using over 10 Years of experience.
Window Style ABS Ring with Lifetime Guarantee
Edit Link Remove
Add up to 3 more photos
Window Style ABS Ring with Lifetime Guarantee

Window Style ABS Rings - BEST PRACTICE

Approx Fitting Time: 60-90 Minutes
  1. Remove old ABS Sensor.
  2. Clean ABS Sensor Tube thoroughly.
  3. Generally there is no need to remove the driveshaft fully from the vehicle, this process can be achieved in situ.
  4. Firstly, you need to remove the old ABS Ring from the Driveshaft / CV Joint by drifting off.
  5. Clean the Driveshaft / CV Joint using a wire brush / emery cloth to remove ALL loose corrosion. DO NOT grind / file or clearance will be lost.
  6. Apply some Retaining Compound to Driveshaft / CV Joint. (supplied with our ABS Kits)
  7. Drift the new ABS Ring into position.
  8. Allow to cure (approx 10 Mins).
  9. Re-assemble using new Hub Nut. (supplied with our ABS Kits)
  10. Fit new ABS Sensor. (supplied with our ABS Kits)
Toothed Style ABS Ring with Lifetime Guarantee
Edit Link Remove
Add up to 3 more photos
Toothed Style ABS Ring with Lifetime Guarantee

Toothed Style ABS Rings - BEST PRACTICE

Approx Fitting Time: 60-90 Minutes
  1. Remove old ABS Sensor.
  2. Clean ABS Sensor Tube thoroughly.
  3. Generally there is no need to remove  the driveshaft fully from the vehicle, this process can be achieved in situ.
  4. Firstly, you need to remove the old ABS Ring from the Driveshaft / CV Joint by drifting off.
  5. Clean the Driveshaft / CV Joint using a wire brush / emery cloth to remove ALL loose corrosion. DO NOT grind / file or clearance will be lost.
  6. Apply heat to the ABS Ring to allow it to expand (placing in the oven or the use of a heat gun is sufficient).
  7. Apply some Retaining Compound to Driveshaft / CV Joint. (supplied with our ABS Kits)
  8. Using suitable heat-resistant gloves, position the new ABS Ring and drift into place.
  9. Allow to cool and cure (approx 10 Mins).
  10. Re-assemble using new Hub Nut. (supplied with our ABS Kits)
  11. Fit new ABS Sensor. (supplied with our ABS Kits)
Magnetic Driveshaft ABS Ring with Lifetime Guarantee
Edit Link Remove
Add up to 3 more photos
Magnetic Driveshaft ABS Ring with Lifetime Guarantee

Magnetic Style ABS Rings (fitted to Driveshafts)

Approx Fitting Time: 60-90 Minutes
**DO NOT expose ABS Ring to strong magnetic fields**
    1. Remove old ABS Sensor.
    2. Clean ABS Sensor Tube thoroughly.
    3. Generally there is no need to remove the driveshaft fully from the vehicle, this process can be achieved in situ.
    4. Firstly, you need to remove the old ABS Ring from the Driveshaft / CV Joint by drifting off.
    5. Clean the Driveshaft / CV Joint using a wire brush / emery cloth to remove ALL loose corrosion. DO NOT grind / file or clearance will be lost.
    6. Apply some Retaining Compound to Driveshaft / CV Joint. (supplied with our ABS Kits)
    7. Place new ABS Ring into ABS Fitting Tool (supplied with our ABS Kits) and slide over the end of Driveshaft. Using supplied Nut, wind the complete unit into place.
    8. Once seated, wind back the complete unit and remove.
    9. Allow to cure (approx 10 Mins).
    10. Re-assemble using new Hub Nut. (supplied with our ABS Kits)
    11. Fit new ABS Sensor. (supplied with our ABS Kits)
    Magnetic Brake ABS Ring with Lifetime Guarantee
    Edit Link Remove
    Add up to 3 more photos
    Magnetic Brake ABS Ring with Lifetime Guarantee

    Magnetic Style ABS Rings (fitted to Brake Disc / Brake Drums)

    Approx Fitting Time: 15 Minutes
    **DO NOT expose ABS Ring to strong magnetic fields**
    1. Remove old ABS Sensor
    2. Clean ABS Sensor Tube thorougly
    3. Remove Brake Drum or Brake Disc from vehicle.
    4. Firstly, you need to remove the old ABS Ring from the Brake Disc / Brake Drum by drifting off.
    5. Clean around the mounting position using a wire brush.
    6. Apply some Retaining Compound around the mounting position. (supplied with our ABS Kits)
    7. Drift the new ABS Ring into position using a suitable drift (block of wood etc). DO NOT impact the delicate black area with any sharp / blunt objects).
    8. Allow to cure (approx 10 Minutes).
    9. Re-assemble using new Hub Nut. (supplied with our ABS Kits)
    10. Fit new ABS Sensor. (supplied with our ABS Kits)

    DISCLAIMER:

    This page has been created as purely a guide based on experience we have developed over the last 10 Plus Years. We accept no responsibility for accuracy of this guide. We also accept no responsibility for any damage or injury caused by following this guide.
    pd ABS Kits with Lifetime Guarantee
    Link to an eBay page Remove
    Add up to 3 more photos
    Link to an eBay page
    pd ABS Kits with Lifetime Guarantee

    pd ABS Kits

    pd ABS Kits here are supplied with ALL necessary components required in a cost saving package.
    Have something to share, create your own guide... Write a guide
    Explore more guides