Buying Wall Mounted Speakers

Views 1 Like Comments Comment
Like if this guide is helpful
Buying Wall Mounted Speakers: Aiming for the Best Quality at the Lowest Price

Wall mounting can provide optimal sound quality in a room, and removes the speakers from walking areas where they may be knocked over and damaged. Mounted speakers are an integral part of home cinema systems, and mounting brackets can be purchased for almost any type of speaker. Buyers on a budget can find many high-performance products at low costs, and choose used products to further reduce strain on a bank account.

Although there are some technical aspects to keep in mind while buying speakers, audio quality is ultimately subjective, and determined by the buyer's personal preferences, not a specifications sheet. Consider the full range of products available, and when possible, listen to speakers in person to find the best performance. 

Wall mounted speakers can be purchased from electronics stores, department stores, and online retailers. Marketplaces like eBay have listings from both private and commercial sellers, and are an easy way to shop for a broad selection of new and used items. With a little patience, shoppers can find wall mounted speakers to suit any room in a home.

Choosing Wall Mounted Speakers

The most important technical consideration while shopping for speakers is their compatibility with a receiver or amplifier. Beyond that, buyers can generally choose the speakers that sound best to the listener, regardless of price. Buyers can also find many types of brackets and shelves for securing their speakers to the wall, including fixed-position and articulating units. Consider all options available to build an optimal home audio setup. 

Matching Speakers to Receivers

To ensure proper performance of a set of speakers, it is important to match them with the receiver or amplifier. There are two things to consider in this process: speaker impedance and sensitivity.

Impedance

A speaker's resistance to incoming audio signals is called impedance, and is measured in ohms. The impedance level on a set of speakers is important because it dictates how much power is required from the amplifier. An overworked or underworked amplifier can result in audio distortion and artefacts, so it is important to match speakers and amplifiers for the best sound quality. An average speaker on the market has an 8-ohm impedance level, and can can be powered well with most amplifiers. Lower numbers, like 4-ohm, are more difficult to drive and require more power. In general, buyers should look for speakers with an 8-ohm impedance level.

Sensitivity

Sensitivity indicates the amount of volume a speaker produces per watt of power it receives. It is measured in decibels (dB). Speakers with low sensitivity require more power, while highly sensitive speakers require less. Most speakers on the market have between 85dB and 95dB sensitivity ratings. In many cases, an amplifier's specifications sheet indicates the range of speaker sensitivity providing optimal audio quality, so attempt to pair the units as much as possible.

Price and Performance

Buyers on a budget may feel they are liable to lose out on sound quality by purchasing mid- or low-priced speakers. This is not always true, however, as a high number of quality speakers can be obtained at reasonable prices. Regardless of technical specifications, the audio quality of a pair of speakers is ultimately a subjective measurement, and buyers should choose the products that sound best to them, regardless of brand or price.

In general, speakers that are big and heavy perform better than those that are smaller and lighter. Because it can be difficult to mount heavy speakers, wall mounted products are typically best used as the rear speakers in a setup only, with larger units occupying the position of standard stereo speakers.

Wall Mounted Speaker Parts and Considerations

Though almost any small or mid-sized speaker can easily be mounted to a wall with the proper equipment, many are designed specifically for mounting. Of these, there are two types: those with built-in brackets, and those designed for use with separate brackets.

Built-in brackets can be a convenient and reliable way to mount units, while speakers designed to attach separately can still be set on stands, if desired. Separate speakers have a threaded slot on the back or underside of the case, allowing them to fasten directly to the bracket.

Brackets

Brackets for speakers are designed to accommodate various positioning, as well as the weight of different products. Choose between speaker-specific or general holders, and decide whether articulating or fixed brackets offer the best performance. It is also possible to find wall mounted shelving units that hold speakers along with other electronics like receivers.

Speaker-Specific

Some brackets are designed for certain sizes and types of speakers. These are fitted with threaded bolts or other fasteners that can be used to attach and hold the speaker in place. In many cases, these products can be purchased along with a speaker set.

General

Buyers can also find generic bracket designs that can hold almost any type of speaker. These products do not have specific fasteners, but are often designed as small ledges, making them an ideal choice for buyers who would like to get an existing pair of speakers up off the floor, but do not have speakers designed for wall mounts.

Fixed-Position vs. Articulating

Wall mounts can be either fixed-position or articulating. Fixed units are generally less expensive, though they do not have much flexibility. For example, speakers on fixed-position brackets may only face one direction, and cannot be adjusted for fine tuning or to accommodate different seating arrangements within a room.

Articulating wall mounts are more versatile, and allow a speaker to swivel from side to side or top to bottom. This provides users with opportunities to make easy adjustments to their speaker setup. Articulating units are more expensive, however, and often cannot hold as much weight as fixed-position ones.

Shelves

In addition to brackets for holding speakers, buyers can also shop for shelves. These units are designed specifically to hold speakers and electronics equipment like receivers. 

Weight

Regardless of the type of bracket purchased, be sure to verify its weight capacity. Never set speakers on a shelf or bracket that cannot accommodate its weight, as it can result in damage to the speakers, bracket, and wall.

Buying Used Speakers

Buyers on a budget can choose to shop for used speakers. High-quality used speakers can be obtained at reasonable prices, and many products in excellent condition are available. An easy way to find used speakers is to shop online. Be sure to read item descriptions carefully, and inspect available photos for signs of wear or damage. When possible, shop from sites with seller profiles to ensure a positive buying experience.

How to Buy Wall Mounted Speakers on eBay

A high number of wall mounted speakers can be purchased from sellers on eBay. To find these items, initiate a search from the eBay homepage using either keywords or category links. For example, to begin a general search for both speakers and brackets, enter "wall mount speakers" into the search field. You may add new keywords to refine search results, or try clicking on any of the category links on each page. These links can be used to browse listings by condition, price, and more.

Take a moment to review product listings and seller profiles before committing to a purchase. Click on the name or image of a speaker or bracket to see its full listing. There, you can find the price of the item, shipping charges, shipping methods, and a description of the item. If you are shopping for used items, look over available photos for signs of wear or damage.

Once you have found desirable products, click sellers' names to see their full profiles. The positive feedback rating indicates the number of buyers in the past 12 months who had a positive buying experience with the seller. Use this information, along with the number of transactions the user has completed to gain a quick idea of a seller's performance. Additional information, including comments left by buyers, can also be found.

Conclusion

wall mounted speakers can enhance the listening experience in a home cinema setup while removing speakers from walking areas. Buyers can select from speakers with built-in brackets or a case design that allows them to be attached to a bracket later, if desired. Many brackets and shelves can also be obtained to hold any type of speaker, and serve as a ledge.

While shopping, consider the impedance and sensitivity ratings of a speaker, and try to match it to the receiver or amplifier. Listen to a set of speakers before purchasing, and choose attractive products within a budget without worrying about specifications sheets or brand names. Determine the weight capacity of wall mounts to ensure they can safely hold a speaker, and decide between fixed-position and articulating brackets. Buyers can also shop for used speakers and brackets to save money.

Wall mounted speakers can be purchased from electronics stores, department stores, and online retailers like those on eBay. Compare sellers to find the best prices, and review item listings and seller histories when buying online. The high number of mounts and speakers available ensures buyers can find a setup to provide optimal performance for any room.

Have something to share, create your own guide... Write a guide
Explore more guides