Views 3 Likes Comments Comment
Like if this guide is helpful

Tools required

4mm allen key

10mm spanner

12mm socket and spanner

14mm socket and spanner

Fitting instructions

The bellypan comes loosely assembled with the brackets in place to show their location and aid fitting. They will need to be removed before fitting to the bike.

The larger triangular engine mount brackets are to be removed from the bellypan and fitted to the engine mount bolts one at a time. 

Once these two are attached to the bike the rear u-shaped mounts should be loosely hooked round the bike frame.

The bellypan can then be offered up and loosely fitted in place. Once it is in place and fits square to the bike all the bolts can be securely tightened.

Please note due to the properties of GRP this product may be susceptible to cracking if bolts are over tightened.

Have something to share, create your own guide... Write a guide
Explore more guides