Grand Voyager A/C Compressor Fitting Guide air con ac

Views 12 Likes Comments Comment
Like if this guide is helpful

Buy Grand Voyager A/C Compressors from £175.00  in our Ebay store. We have a vast selection of Grand Voyager Air Con Compressors, new, reconditioned and remanufactured.

Grand Voyager A/C Compressors - Grand Voyager A/C Condensers - Grand Voyager A/C Evaporators - Grand Voyager A/C Receiver Driers

Below is a fitting guide for your convenience - Please give us a positive vote if it proves useful.


When a failed Grand Voyager air conditioning compressor is replaced by a new Grand Voyager a/c compressor, it is so important to have the lubricant distributed evenly across the Grand Voyager air conditioning compressor and the Grand Voyager a/c system before engaging the system for the first time.

If this is overlooked and the Grand Voyager air con compressor is engaged immediately after is has been charged with refrigerant, it may happen that all the oil in the Grand Voyager a/c compressor will be pushed out all at once while there is no oil yet to enter the Grand Voyager air conditioning compressor on the other side. This is caused by the fact that it takes some time for the oil to spread across the system and mix with the refrigerant. Eventually the Grand Voyager ac compressor may be damaged because of a lack of lubrication during the first few minutes of operation.


This will of course be more problematic after the system has been flushed, this will mainly be the case after the Grand Voyager air con compressor has suffered a catastrophic failure with metal particles from the Grand Voyager a/c compressor being spread across the entire system.


A rule of thumb guide when installing a new Grand Voyager air con compressor is to manually turn the Grand Voyager a/c compressor pulley
to make sure that the oil is distributed through the Grand Voyager air con compressor evenly. Experienced engineers will
normally turn the Grand Voyager ac compressor 10—15 times to ensure that oil has been pushed around the system.


There is still more to do to prepare the Grand Voyager air con compressor, knowing and following the procedure will be of great importance if a newly installed Grand Voyager air conditioning compressor should fail after a short period of time and within its warranty period. There is no bigger disappointment than having a warranty claim denied because something as simple as the following procedure has been overlooked.


Generally new Grand Voyager a/c compressors are supplied charged with oil, but it is always recommended that you check this by draining the new Grand Voyager air con compressor to check the amount of oil in the Grand Voyager air conditioning compressor.


Then once you have removed the old Grand Voyager a/c compressor you should do the same again, empty the old Grand Voyager ac compressor of oil to see how much oil was in it and then fill the new Grand Voyager air con compressor with the same amount this is to avoid over charging the system with oil.


After this has been done and the Grand Voyager a/c compressor has been fitted, you do not engage the Grand Voyager air con compressor with the engine running until the following steps have been followed.


1, Open all air louvers at the dash board, 2, Start the engine and let it stabilise at idle speed 3, Set the
blower at maximum speed, 4, Engage the Grand Voyager a/c system and operate it continuously for 2 minutes at below
1500 rpm.


After the two minutes the Grand Voyager air con compressor oil will have distributed evenly throughout the Grand Voyager a/c system.

For all of your Grand Voyager Air Con Compressors and other Grand Voyager Air Conditioning parts visit our Ebay Shop

Please click 'Yes' below so this guide can help others.

Have something to share, create your own guide... Write a guide
Explore more guides