HOW TO REMOVE & REFIT A STEREO FOR A FIESTA MK6

Views 5 Likes Comments Comment
Like if this guide is helpful

WELCOME TO THE FORD CENTRE.WE ARE A FAMILY RUN BUSINESS,WE SPECIALISE IN GENUINE FORD PARTS.WE PRIDE OURSELVES IN WHAT WE DO HERE AT THE FORD CENTRE.

WE WOULD LIKE TO SHARE SOME OF OUR KNOWLEDGE ON HOW TO REMOVE AND REFIT PARTS FROM FORD CARS.WE CAN ALSO GIVE ADVICE ON ANY PARTS THAT YOU REQUIRE ASSISTANCE WITH.

HOW TO REMOVE A MK6 FIESTA STEREO(YEARS 2002 -2005).

TO START PULL DOWN THE GLOVE BOX AND YOU WILL FIND TWO PHILLIPS SCREWS YOU WILL NEED TO UNDO THESE.

ON THE DRIVERS SIDE UNDERNEATH THE STEERING COLUMN THERE IS A LITTLE POCKET PULL THE POCKET DOWN AND THERE ARE TWO PHILLIPS SCREWS YOU WILL NEED TO UNSCREW THESE.

UNDERNEATH THE POCKET BY THE PEDALS THERE ARE FOUR PHILLIPS SCREWS YOU WILL NEED TO UNSCREW THESE AND THE PLASTIC WILL RELEASE.

REMOVE THE GEAR KNOB BY UNSCREWING,THEN PULL THE PLASTIC SURROUND AROUND THE GEAR KNOB AND HANDBRAKE.CAREFULLY REMOVE THE WIRES FOR THE CIGARETTE LIGHTER THEN PULL PANEL CLEAR.

WITH A STRAIGHT SCREWDRIVER YOU WILL NEED TO REMOVE THE HEATER SWITCH BY THE STEREO CAREFULLY,THEN REMOVE THE WIRES FOR THE HEATER SWITCH.

YOU WILL FIND TWO PHILLIPS SCREWS BEHIND THE HEATER PANEL YOU WILL NEED TO UNSCREW THESE AND THE FASCIA WILL RELEASE.

YOU WILL FIND TWO PHILLIPS SCREWS ON BOTH SIDES OF THE STEREO.

YOU WILL NEED TO UNSCREW THESE AND THE STEREO WILL RELEASE.

FINALLY YOU WILL NEED TO RELEASE THE WIRES AND THE AERIAL CONNECTION TO THE BACK OF THE STEREO,THE STEREO WILL RELEASE AND YOU WILL HAVE COMPLETED REMOVING A STEREO.

CONGRATULATIONS ON BEHALF OF THE FORD CENTRE FOR SUCCESFFULLY REMOVING A STEREO FOR A FIESTA MARK 6.

HOW TO REFIT A MK6 FIESTA STEREO

FIRSTLY YOU WILL NEED TO RECONNECT THE STEREO WIRES BACK INTO THE STEREO MAKING SURE THAT ALL IS WORKING BEFORE REFITTING STEREO BACK INTO THE DASH.

WRITE THE STEREO CODE ON TOP OF THE RADIO FOR NEXT TIME AND SIMPLY PUSH BACK INTO THE DASH.SCREW THE FOUR PHILLIPS SCREWS BACK INTO POSITION AND CHECK TO SEE IF SECURE.

YOU WILL NEED TO GET THE HEATER PANEL BACK INTO PLACE WITH THE TWO PHILLIP SCREWS,CONNECT WIRES FOR HEATER PANEL,PUSH BACK INTO CORRECT POSITION.

PUT THE SURROUND AROUND THE GEAR STICK BACK INTO POSITION AND SCREW GEAR KNOB BACK ON.

APPLY SCREWS BACK INTO THE LITTLE POCKET BY THE STEERING COLUMN AND PUSH POCKET BACK INTO POSITION.

INSERT FOUR SCREWS DOWN BY THE PEDALS WHICH IS HOLDING THE PLASTIC SURROUND IN POSITION.

CONGRATULATIONS YOU HAVE SUCCESSFULLY REFITTED A FIESTA STEREO.

FOR FURTHER ASSISTANCE PLEASE CALL US ON 0121 356 3666 OR SEND AN EMAIL AT INFO@THEFORDCENTRE.COM HAVE A LOOK AT OUR ONE STOP FORD SHOP,USE THE LINK PROVIDED ONE STOP SHOP FOR LATE FORD PARTS

Have something to share, create your own guide... Write a guide
Explore more guides