How To Setup Our Heavy Duty Gazebo

Like if this guide is helpful
Figure 1.1
Edit Link Remove
Add up to 3 more photos
Figure 1.1

STEP 1.1

Place your gazebo frame in the center of the setup area. It's best to ask a friend to go the other side of the frame, with you and your friend hold the two outer legs and lift the frame off the ground slightly for clearance, take a few steps backwards until you both of you have extended the frame a full arms length approximately 4 feet (Fig 1.1).

Figure 1.2
Edit Link Remove
Add up to 3 more photos
Figure 1.2

STEP 1.2

To improve the opening and closing action of your frame its best the place the canopy over the top of the frame (Fig 1.2)

Figure 2.1
Edit Link Remove
Add up to 3 more photos
Figure 2.1

STEP 2.1

Locate each velcro strap on each corner of the canopy (Fig 2.1)
Figure 2.2
Edit Link Remove
Add up to 3 more photos
Figure 2.2

STEP 2.2

Use the Velcro straps to secure each corner of the top to the frame on corresponding Velcro already attached to the frame (Fig 2.2)

Figure 3.1
Edit Link Remove
Add up to 3 more photos
Figure 3.1

STEP 3.1

Grab the bottom of the middle frame section where it forms a "V" shape       (Fig 3.1)
Figure 3.2
Edit Link Remove
Add up to 3 more photos
Figure 3.2

STEP 3.2

Lift the frame off the ground slightly and slowly walk backwards until the frame is fully extended, two people gold the X truss bar on the opposite sides and extend the gazebo until it touches the eaves of the top (Fig 3.2)
Figure 4.1
Edit Link Remove
Add up to 3 more photos
Figure 4.1

STEP 4.1

Prior to locking the leg sliders partially fold back the canopy at each corner to increase visibility, next hold the leg of the frame with one hand and lift the slider (Fig 4.1)
Figure 4.2
Edit Link Remove
Add up to 3 more photos
Figure 4.2

STEP 4.2

For ease of opening depress the locking button while pushing the slider up until it passes over the locking pin (Fig 4.2). Return the folded corner of the canopy to the proper position.
Figure 5.1
Edit Link Remove
Add up to 3 more photos
Figure 5.1

STEP 5.1

The adjustable legs offer multiple height levels. To adjust simply lift the leg up and pull the inner leg until the button pops into place (Fig 5.1)
Figure 5.2
Edit Link Remove
Add up to 3 more photos
Figure 5.2

STEP 5.2

Repeat step 5.1 on all other legs until all gazebo legs are at the same level (Fig 5.2)

Figure 6.1
Edit Link Remove
Add up to 3 more photos
Figure 6.1

STEP 6.1

Every sidewall contains a Velcro strip at both ends. Attach the Velcro strip on the leg one by one. (Fig 6.1) Each side also zips together for added security.

Figure 6.2
Edit Link Remove
Add up to 3 more photos
Figure 6.2

STEP 6.2

On the top of each sidewall there is a long Velcro which connects to the corresponding Velcro strip located on the canopy (Fig 6.2)
Figure 7.1
Edit Link Remove
Add up to 3 more photos
Figure 7.1

STEP 7.1

Please make sure that the sidewall with windows are located at either side of the gazebo (Fig 7.1). If the wind is strong, please use the stakes and ropes and if possible use sandbag weights on each leg to help secure the gazebo to the ground.

Figure 8.1
Edit Link Remove
Add up to 3 more photos
Figure 8.1

STEP 8.1

To packup the gazebo is the reversible process to install it (Fig 8.1)

Have something to share, create your own guide... Write a guide
Explore more guides