Installing stickers

Like if this guide is helpful

How to install the stickers?

Few simple steps to install your stickers.
What you need:
1. Cleaning spray and paper towel
2. Squeegee or plastic card
3. The sticker

Now let's get started.
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Step 1 - Clean the area


Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Step 2 - Prepare the sticker for application

Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Step 3 - Peel the white paper backing off

Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Step 4 - Lower the sticker onto the surface

Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

Step 5 - Slowly peel the clear transfer tape off

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.

Sources:

carstickers
Link to an eBay page Remove
Add up to 3 more photos
Link to an eBay page

A great installation video

Sources: Vinyl Mayhem
Have something to share, create your own guide... Write a guide
Explore more guides