Noisy Hydraulic Tappets

Views 1 Like Comments Comment
Like if this guide is helpful
Noisy Hydraulic Tappets can be cured by simply pouring RESTORE into the normal engine oil.  If you have worn valve guides and cam bushings and cam lobes we recommend removing the rocker cover (also called the valve cover) and pouring a few drops of RESTORE directly onto each moving component (you need to get the RESTORE onto the valve stems i.e. through the springs) and cam wear surfaces.  An old plastic syringe works well (don't use it for anything else afterwards of course).  This normally takes care of valve guide problems.  RESTORE will not be able to rebuild a cam lobe that has been ground away by low oil levels though.  You may need to add shims if the cam lobes have been ground away by a low oil situation, or change the camshaft.


Have something to share, create your own guide... Write a guide
Explore more guides