REMOTE DOOR LOCKING FOB INSTRUCTIONS FOR A FORD PUMA

Views 3 Likes Comments Comment
Like if this guide is helpful

WELCOME TO THE FORD CENTRE.WE ARE A FAMILY RUN BUSINESS,WE SPECIALISE IN GENUINE FORD PARTS.WE PRIDE OURSELVES IN WHAT WE DO HERE AT THE FORD CENTRE.

WE WOULD LIKE TO SHARE SOME OF OUR KNOWLEDGE ON HOW TO HELP YOU SUCCESSFULLY TO REMOVE AND REFIT PARTS FROM  FORD CARS.WE CAN ALSO GIVE ADVICE ON OTHER PARTS THAT YOU REQUIRE ASSISTANCE WITH.

REMOTE DOOR LOCKING FAB INSTRUCTIONS FOR A PUMA SQUARE FOB.

YOU WILL HAVE A STANDARD TWO BUTTON FOB WITH UNLOCK BUTTON AND LOCK BUTTON.

FIRSTLY YOU WILL NEED TO SWAP THE TRANSPONDER FROM YOUR OLD FOB TO THE ONE SUPPLIED.

FASTEN SEAT BELTS AND CLOSE ALL DOORS

TURN THE KEY UNTIL THE IGNITION LIGHTS COME ON (DO NOT START)

DO THIS FIVE TIMES ON AND OFF VERY QUICKLY UNTIL IT BLEEP ONCE.

ONCE IT HAS BLEEPED CLICK THE LOCK BUTTON SEVERAL TIMES.

PROGRAMMING MODE ACTIVATED FOR APPROXIMATELY 20 SECONDS

LED OR FOG LAMPS ON WARNING LAMP ILLUMINATES (SOME MODELS) OR THE SYSTEM WILL EMIT AN ACOUSTIC SIGNAL TO INDICATE START OF PROGRAMMING MODE.

PROCEED AS FOLLOWS

PRESS AND HOLD UNLOCK BUTTON

PRESS UNLOCK BUTTON

ENSURE CLOCK LED OR FOG LAMPS ON WARNING LAMP FLASHES (SOME MODEL) OR WAIT FOR ACOUSTIC SIGNAL (INDICATES CORRECT PROGRAMMING)

WAIT 2 SECONDS

TO EXIT PROGRAMMING MODE

SWITCH IGNITION ON

WAIT 20 SECONDS

THE CAR SHOULD OPEN AND LOCK.

CONGRATULATIONS ON BEAHLF OF THE FORD CENTRE YOU HAVE SUCCESSFULLY COMPLETED THE JOB.

IF YOU REQUIRE ANY FURTHER ASSISTANCE PLEASE CALL US ON 0121 356 3666 OR EMAIL US AT INFO@THEFORDCENTRE.COM HAVE A LOOK AT OUR ONE STOP FORD SHOP, USE THE LINK PROVIDED  

ONE STOP FORD SHOP FOR LATE FORD PARTS

Have something to share, create your own guide... Write a guide
Explore more guides