SAE 100 R2AT HYDRAULIC HOSE

Like if this guide is helpful
Link to an eBay page Remove
Add up to 3 more photos
Press Enter to Save
Link to an eBay page

DATA SHEET

Hose Size (Inch) I.D. (mm) Braid  (mm) O.D.
(mm)
Working Pressure (P.S.I) Burst Pressure (P.S.I) Bend Radius (Min) (mm)
3/16 4.8 11.1 13.4 6000 24000 90
1/4 6.4 12.7 15 5800 23200 100
5/16 7.9 14.3 16.6 5075 20300 115
3/8 9.5 16.7 19 4800 19200 130
1/2 12.7 19.8 22.2 4000 16000 180
5/8 15.9 23 25.4 3625 14500 200
3/4 19 27 29.3 3100 12400 240
1 25.4 34.9 38.1 2400 9425 300

Hose Construction


Tube:     oil resistant synthetic rubber 
Reinforcement:   two high tensile steel wire braid 
Cover:     abrasion and weather resistant synthetic rubber 
Temperature Range:  ‐40°C to +100°C (+120°C max)

Additional Information

Double wire braid. Recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Long-lasting cover is suitable for many mobile hydraulic applications. Meets or exceeds all SAE 100 R2AT hydraulic hose specifications

This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

Not suitable for hydraulic fluids on phosphate ester basis (HFD).

Have something to share, create your own guide... Write a guide
Explore more guides