FOR SMALL DECALS OR LETTERING
1. CLEAN THE SURFACE
Wipe clean the surface you are applying the decal to with a mild cleaner. i use water with stardrops or washing up liquid. (Allow to dry).
2. PEEL OFF THE BACKING PAPER
Carefully peel off the backing layer from the decal. (Only the vinyl and the clear transfer layer should remain).
3. APPLY DECAL TO SURFACE
Place your decal on the surface, Use a squeegee or credit card to rub and smooth the decal onto the surface. press firmly from the centre moving outwards
4. REMOVE MASKING TRANSFER TAPE
Now remove the masking tape transfer layer by peeling it off starting from the corner. (Only the vinyl decal should remain).
If you have a larger decal it is easier to get a friend to help you peel off the backing paper and hold the decal at a slight angle away from the surface whilst you squeegee the decal starting at one end then working outwards from the centre of your starting place.. (a light spray of water is recomended incase you have to remove the decal during instalation. this will help you reposition it if needed.
if water is used use a hair dryer to cure the decals to the surface before removing the transfer paper.