There are a couple of cases where their actual voltage difference may be important to you. In the case of a device like a radio, where a higher voltage can mean a stronger signal, a fresh alkaline battery may be more desirable - but more expensive - than a rechargeable NiMH battery. This is also true for a tourch, which will be brighter with the initial higher voltage of alkaline cells. This minor difference may not be important to you and is probably offset by the much lower cost of operating NiMH batteries. And keep in mind that the alkaline battery only has a higher voltage when it is fully charged. Once it gets to 50% capacity or less, it will be delivering a lower voltage than a NiMH battery.
The one time when the voltage difference of the two is important would be in the case of a device that checks the voltage of a battery to estimate the amount of charge left on the battery. Because the voltage of an alkaline battery drops at a very predictable rate it's possible to estimate the amount of capacity left in an alkaline battery based solely on its voltage. 1.5 volts - fully charged, 1.25 volts - 50% charged, 1.0 volts - almost fully discharged. But a NiMH battery stays at about 1.2 volts until it is nearly completely discharged. This makes it almost impossible to know the amount of capacity left based on its voltage alone. When a device that's using NiMH batteries indicates the battery is low, it's time to change the batteries now!
Will a 1.2v battery work the same as a 1.5v battery
Views 6 Likes Comments Comment
28 September 2008
Have something to share, create your own guide... Write a guide
Explore more guides