Xbox 360 Rapid Fire Installation GUIDE!

Like if this guide is helpful

Change Mode On Rapid Fire Kit:

  • When you switch on the controller, you are in mode OFF (no led), RapidFire is disabled, your controller is running as before.
  • Press briefly on "Sync" button to change mode, when you are on the last, the next mode is "OFF".
  • When you change mode, the led is blinking as many times as the mode in which you are... for exemple if you are in mode 5, the led blink 5 times.
  • When the mode is up to 10, the led blink as the mode in which you are minus 10... for exemple you are in mode 14, the led blink 4 times. Same thing for 20,30...
  • When you press longly on "Sync" button, you are in "Stand-By" mode, the rapidfire is disabled temporarly (the led is blinking very fast), to return on your previous mode press briefly on "Sync" button, the led is blinking as many times as the mode in which you are.

Mod for CG Controller :



Mod for Matrix Controller :

(diode is not needed therefore 3 resistors will be fine)

 

If you have any questions feel free to ask us, Many Thanks Velix.

Have something to share, create your own guide... Write a guide
Explore more guides