mounting our posters

Views 1 Like Comments Comment
Like if this guide is helpful

Firstly mark the centre of the wall using a tape measure and spirit level for the straight line (mark in pencil)

Arrange the top sections first starting with the middle piece
(numbers on reverse)
once you are happy with the positioning proceed to lay out  the rest of the top layer then layers below, we recommend leaving around a 2-3mm gap between each print or the images can be joined together

feel free to have the gap in the prints as big or as small as you wish as its your creation!

All our prints are printed on 260-290gsm paper so will be a heavy product to mount, we don't recommend using blue tack for whole posters as this could
result in the product falling off the wall, instead use high tack sticky tabs or a 3m
Wall mount spray adhesive, both are readily available on eBay or local stores.

Our images look great in frames—the choice is endless!

In the unfortunate event that the product you purchased is unsatisfactory,  we urge you to contact us prior to leaving negative feedback as we are here to resolve any problems you may have,

We are  top rated power sellers with excellent communication and we feel this reflects in our feedback

drop us an email on ebay

Many thanks for your purchase


 

Have something to share, create your own guide... Write a guide
Explore more guides