volvo 850 alarm fob reprogramming

Views 5 Likes Comments Comment
Like if this guide is helpful

VOLVO 850 ALARM FOB REPROGRAMMING

FREE TO DO DONT WASTE MONEY BUYING INFORMATION

IT IS FREE

  1995 ACCESSORIES & EQUIPMENT

Volvo Keyless Entry Systems

850

DESCRIPTION & OPERATION

         850 models with central locking and factory installed alarm

system can be equipped with a remote-controlled keyless entry system.

Transmitter has a range of about 5 meters. Remote control cannot be

used to lock vehicle if ignition switch is in position I or II.

         Upon receiving signals from transmitter, receiver unit

transmits locking or unlocking signals to central locking relay.

Central locking relay switches interior lighting on and off, and

transmits signals to alarm relay to activate and deactivate alarm.

Receiver includes a memory which can store coded radio signals from a

maximum of 3 different transmitters. Information is retained in memory

even if battery is disconnected.

         RECEIVER PROGRAMMING

Transmitter Replacement

         If transmitter is replaced, unit may need reprogramming. It

is necessary that receiver be programmed with each key code. To

reprogram receiver, turn ignition switch to position I or II 5 times

within 10 seconds. Leave ignition on at fifth turn. Press either LOCK

or UNLOCK button on transmitter once within 30 seconds. If transmitter

is provided with different key codes, programming of each unique code

must be accomplished within 30 seconds. Turn ignition off. Verify

operation of each individual transmitter.

Have something to share, create your own guide... Write a guide
Explore more guides