Details about 2006 SRM Wired PowerMeter Cannondale Hollowgram Si/SL BB30 PowerControl V road2006 SRM Wired PowerMeter Cannondale Hollowgram Si/SL BB30 PowerControl V road See original listing
19 Jun, 2012 01:00:39 BST
Approximately £386.77(including postage)
[ 18 bids ]
US $86.75 (approx. £50.84) USPS Priority Mail International Medium Flat Rate Box | See details
International items may be subject to customs processing and additional charges. help icon for delivery - opens a layer
International delivery - items may be subject to customs processing depending on the item's declared value.
Sellers set the item's declared value and must comply with customs declaration laws.
As the buyer, you should be aware of possible:
- delays from customs inspection.
- import duties and taxes which buyers must pay.
- brokerage fees payable at the point of delivery.
Your country's customs office can offer more details, or visit eBay's page on international trade.
Cape Elizabeth, Maine, United States
PowerMeter Cannondale Si/SL BB30
Cannondale BB30 SRM specific
Dura-Ace 7800 53T/39T B-type
|Crank arm length:||
|Frame and Wheel PAAS charge:||
|Frame and Wheel rating:||
Very good condition
|Bolt circle diameter:||
|CPU battery status:||
Replaced by SRM USA May 2012
9 / 10 speed
2006 SRM Wired PowerMeter Cannondale Hollowgram Si/SL BB30 PowerControl V road
Frame and Wheel is auctioning a wired SRM PowerMeter Cannondale Si/SL crank set and a PowerControl V on the Frame and Wheel eBay Store. The power meter crank set and power control unit were stock on an unsold Cannondale at Cyclemania in Portland Maine. They were switched out and installed on a 2011 Cannondale SuperSix HighMod bicycle. The current owner purchased the bicycle and the SRM. The power meter and power control unit were used for racing and training. They were switched out in early 2012 and have been in storage. The owner is selling the SRM because he no longer uses them. The PowerMeter crank set features Cannondale Hollowgram Si/SL crank arms, Dura-Ace 7800 53T / 39T chain rings and BB30 compatibility. The PowerControl V unit features power, distance, speed, cadence and temperature data readings, black finish and new batteries. The power meter crank set, the power control unit and the sensor cadence magnet cable were sent to SRM USA for servicing and testing in May 2012. The batteries in the power control unit are new and the system works properly. The power meter crank set weighs 613 g. The serial number on the back of the crank set reads PM7600. The serial number on the power control unit reads 16009. There are 30 images of the power meter on the Frame and Wheel Flickr page. Please take a look. SRM USA testing and servicing paperwork included. Sensor and cadence magnet cable included. Power control unit handle bar mount included. Charger with US/UK adapter included. USB download cable included. Please note: The SRM Cannondale Hollowgram crank set requires a Cannondale BB30 SRM specific spindle (Please see link below). Bottom bracket not included. SRM software not included. Heart rate monitor strap not included. Magnet for speed sensor not included.
There is a $50.00 Product Analysis and Service (PAAS) charge included in the shipping for this item. For more information about the PAAS and other Frame and Wheel shipping and return policies, please see section at the end of the item description. Please visit the Frame and Wheel website for more information about the service and the company. Thank you.
Review of condition
The power meter crank set is in very good condition. It is clean and ready for installation and use. The chain rings are not bent and the teeth are not chipped or broken. The chain ring bolts are not stripped or corroded or locked into place. The pedal thread bolts are not stripped. None of the chain ring bolts are missing. The spindle ends in the crank arms are not rounded off. There is no wear on the crank arms. There are no cracks in the body. The power meter control unit is in very good condition. It is clean and ready for installation. The screen is not damaged. The buttons work properly. It cycles through all of its pages. The batteries are new. The crank set, control unit and the sensor cable was returned to SRM USA for servicing and inspection in May 2012. SRM USA did the following: 1) Disassemble power meter, chainrings and crank arms. Clean and check reed switches, solder pad, coil, wires and lid. Load firmware, solder new batteries, test current and zero offset. Reassemble power meter with chain rings and crank arms. Calibration, test with PowerControl. SRM concluded that zero offset, power and cadence were OK. 2) Provide new slope=19.9Hz/Nm, new lid, reed switch, solder pad, 50 revolution coil, wires and O-rings. 3) Battery change in PowerControl V#16009 4) Sensor cable tested OK. Frame and Wheel notes the following. The back of the chain rings show wear.
Frame and Wheel conclusion
Frame and Wheel’s view is that this SRM PowerMeter will make an excellent choice for the cyclist who seeks the benefits of training and racing with a power meter and who is not concerned about the presence of some wires on the down tube. Indeed, power meter experts point out that the wired version transmits data faster and more reliably than the swankier wireless version. SRM users including Frame and Wheel note first the tremendous convenience of the SRM power meter when it comes to switching wheels. This crank set, control unit and sensor cable are just back from servicing and testing at SRM USA and are ready to measure watts with ruthless accuracy. The new owner’s cycling performance will ultimately benefit from the reams of data made available by this tool, despite the almost certain disillusionment that will follow on the first 20 minute threshold power test. A great opportunity to obtain an instrument that has become ubiquitous in competitive cycling.
Search “user manual SRM wired Power Control V” to obtain user manual pdf.
Crank set specifications
Model: PowerMeter Cannondale Si / SL Hollowgram
Model year: 2006
Serial number: PM7600
Slope: 19.9 Hz/Nm
Crank arm and spider material: alloy
Chain rings: Dura-Ace 7800 53T outer B-type 39T Dura-Ace 7800 inner B-type
Chain compatibility: 9 / 10 speed
Crank arm length: 175 mm
Bolt circle diameter: 130 mm
Bottom bracket: BB30 Cannondale Si Hollowgram
Spindle type: Cannondale BB30 SRM specific spindle required
Weight: 613 g (Cranks and chain rings)
Frame and Wheel rating: Very good condition
Model: PowerControl V
Model year: 2006
Serial number: 16009
Weight: 67 grams
Battery status: new (replaced May 21 2012 by SRM USA)
Data shown: power, heart rate, cadence, temperature, time, distance
Frame and Wheel rating: Very good condition
Other included items
1) SRM PC V Multicharger 100 / 220v wall charger type APS 1612T with USA Japan UK adapter
2) SRM Sensor / cadence magnet: cable rear length: 114 cm (45 inches) front 125 cm (49 inches)
3) TechLine USB download cable
4) SRM handlebar clip
Product analysis and service (PAAS) charge
Frame and Wheel includes a product analysis and service (PAAS) charge in its shipping cost estimate. The PAAS charge covers or defrays the cost of packaging materials and compensates Frame and Wheel for the time and effort spent on originating detailed, accurate and informative images and descriptions of the item. The PAAS charge is included in the shipping estimate.
The item is shipped using First Class Mail, Parcel Post or Priority Mail in the United States depending on item size and your choice of service. If the item is too big for USPS service, FedEx Ground is used. Please check the drop down menu in the shipping tab for rates.
The item is shipped internationally using First Class International or USPS Priority Mail International depending on item size and your choice of service. Please check the drop down menu in the shipping tab for rates. For items that are too big for USPS service, FedEx Economy International is used. Please send zip code and city for shipping cost estimates. Please do not ask to have international items described as gifts or promotional items. Frame and Wheel will not oblige. International buyers are responsible for import tax and duties.
Combine shipping and local pick up
Frame and Wheel will combine shipping, but the product analysis and service (PAAS) charge still applies per item. Local pick up is not offered, but will be provided if buyer is willing to pay product analysis and service plus the quoted shipping cost.
Returns are accepted. Please see return policy.
Please pay promptly after winning and by Pay Pal. If there is a delay, please advise. Thank you.
About Frame and Wheel
Frame and Wheel is a corporation that employs one person. Frame and Wheel’s mission is to provide excellent value and service to its customers using the eBay infrastructure. Frame and Wheel also seeks to generate a profit and to sustain the job it has created for its employee and shareholder. More information about the service, commissions, product analysis and service charges and other policies, can be found at Frame and Wheel Auction Services. Please take a look and thank you for using the service.
More information about Frame and Wheel can be found at Frame and Wheel - Home
Find the page on Facebook at Frame and Wheel
Follow us on Twitter @frameandwheel
Ride with Frame and Wheel on Strava Cycling