Thank you very much for visiting our store again. We are on holiday from 2013-2-6 to 2013-2-18 for our China's New Year Holiday, during these days, we will be not able to arrange shipment. Hope for your understanding. If you are willing to wait for the item, please bid on it directly, we will arrange the shipment on 2013-2-19 as soon as we are back. If you have any question, please feel free to leave us your message, we will reply you as soon as we can.
Have a great day!
Serial 13.56MHZ RFID Reader/Writer Module Kits - Arduino Compatible
Based on MFRC522, this RFID Module is a highly integrated reader/writer for contactless communication at 13.56MHz . It supports ISO 14443A/MIFARE mode and MIFARE Classic (e.g. MIFARE Standard) products. Contactless communication using MIFARE higher transfer speeds up to 848kbit/s in both directions.
We embeded an MCU on this module. By sending command via UART interface, you can make it work. Operation is very easy. Most work is done by the embeded MCU. There is also a SPI interface on the board. This is the MFRC's SPI. You can access MFRC directly via this inteface.
Various host interfaces are implemented on this module:
- SPI interface
- Serial UART
- Highly integrated analog circuitry to demodulate and decode responses
- Supports MIFARE Classic encryption in Reader/Writer mode
- Supports ISO/IEC14443A higher transfer speed communication up to 848kbit/s
- Control by Serial UART interface: Baud rate could be 2400bps ~ 115200bps, with default baud rate 9600bps
- With the chip ISO14443, it supports MIFARE standard encryption algorithm
- Supports ISO/IEC14443A/MIFARE
- Typical operating distance in Reader/Writer mode for communication to a ISO/IEC14443A / MIFARE is 40~50 mm
- Configuration data is preserved in EEPROM against power cut off
- Built-in 8K EEPROM, easy to access it by sending commands
- Easy to use, by sending simple commands users can control it to read or write cards
- In compact command, command is as short as one byte
- Excellent EMC performance
- ROSH: Lead-free
- Power Supply: 4.5V~5.5V, typically 5V.
- Interface: UART (5V TTL) and SPI (3.3V TTL)
- Size: 40mm x 50mm
There are two kinds of command: Basic command and compact command. All the command are in Hex format. Please download manual for more information.
Connecting with Arduino is pretty easy. With Arduino Sensor Shield, just plug in and play.
Baud rate could be 2400bps ~ 115200bps
Default setting : Baud Rate: 9600bps ; Parity bit: None ; Start bit: 1 ; Data bit: 8 ; Stop bit: 1
What It could do :
Read card's serial NO.
Add / remove card from authorization list
Check card in the list
Read / write RFID card
Read / write EEPROM
- 1 X RFID module
- 2 X MIFARE1 S50 tag card
- 1 X MIFARE1 S50 key card
- 1 X 4-pin wire
-- We accept paypal from verified customers with a confirmed address.
-- Please make the payment within 5 working days of the close of the auction. If you are bidding on several of our auctions which will close on different days, please contact us and you may wait until the last auction you are watching has ended for the payment.
-- If you want the item to be shipped to an address different from your Ebay account, please inform us by email before payment.
-- Item will be shipped by HONG KONG AirMail. Delivery will take 7-30 working days(excludes weekends) depends on location.
-- We ship all items within one working days (Monday to Friday only) after clearance of payment excluding Saturday, Sunday and public holidays.
Notice : Customs Duties
Import taxes and Customs Duties in your country are NOT INCLUDED in the item price or shipping charges . These charges are the buyer's responsibility.
If you have trouble in your country's Customs about your parcel , please contact with us!
We want you to be happy with our products.And your satisfactory is very important to us.
Please contact us if there are any problems and we will do my best to fix it out. Here is our misrepresented & unsatisfied merchandise policy.
-- 1. We accept returns for replacement or refund within 5 days after receipt of item(s). Items MUST be in their original condition, not worn or altered.
-- 2. We DO NOT reimburse the return shipping charge. Refunds will be for the original price paid, and will be issued within 7 business days after receipt of the return.