HUBCENTRIC SPACER KIT
Part no 608 - £55 per kit (PAIR OF SPACERS)
Each spacer is made from billet steel & 20mm wide
To Fit the following vehicles -
Seat - Ibiza, Arosa, Inca, Toledo
VW - Golf 1,2,3, Lupo. Jetta, Corrado, Derby, Polo, Passat & Scirocco
With 4 x 100 PCD and 57.1mm centre bores.
These Hubcentric Spacers are designed with a built in spigot to locate wheels onto spacer and recessed in the rears to exact fit for the hubs thus avoiding wheel wobble which normally happens when you fit the standard universal type spacers.
Each kit contains:-
2 x 20mm spacers
Along with 8 special shallow headed bolts (12 x 1.5mm thread) which you use to bolt the spacers onto your hubs. Then you can bolt your wheel onto the spacer itself.
Please Note :- As all wheels vary please check that your original bolts are not too long and bottom out on the inside of the spacer. Please check as we cannot be held liable for any damage caused by overlength bolts being used..
To check your bolts for length, remove a wheel, put bolt in wheel & measure length of thread sticking out the back if more than say 19mm the bolts will be too long & bottom out on the hubs & will not do up tight enough. You can either buy shorter length bolts or carefully cut yours to size.
Shipping costs terms & conditions - please read carefully
CARRIAGE COSTS as per POST CODE ZONES
Usually either 24hr or 48 hr service however these are not guaranteed delivery times.
Carriers must have a contact phone number and all parcels will need to be signed for when delivered if no one home you will be carded.
Undelivered parcels will be returned to us and this will incur a fee which will the be charged to you so please contact the carrier asap regarding re- delivery.
ZONE A - £10 PER PARCEL upto 20kg – usually 24hr Service
ALL Postcodes in England & Wales –
Parts of Scotland – excluding Highlands & Islands – see Zones B & C
EXCLUDING all offshore islands (ie Northern Ireland, Isle of Wight, Isle of Man, Scilly Isles, Channel Islands etc)
ZONE B - £20 per parcel (up to 20kg) Highlands of Scotland etc – 48hr Service
FK 17-99 G83 IV1-28 IV33-39 KW (ALL) PA21-33 PA35-40 PH18-26 PH30 PH31-42
ZONE C - £20 per parcel (up to 20kg)Scottish Islands &Northern Ireland etc– 48hr Service
PA20 PA34 PA41-48 PA60-78 PH42-44 ZE3-3 KA27 KA28 KW1-17 HS1-9 IV40-51 IV55 IV56,
BT – NORTHERN IRELAND
Isle of Wight
Isle of Man
ROI – Republic of Ireland
ZONE D – £25 per parcel (up to 20kg) –
CI – Channel Islands
We will ship worldwide but please remember because these are solid steel they are very heavy so shipping may be very expensive we can send to many European locations by international road carrier which is cheaper than air mail but we are more than happy to quote shipping costs. - please email us with quantity of kits required.
We only list the kits we actually have in stock ready for immediate dispatch but our stock changes daily as we are a retail shop with full mail order facilities & do not trade solely on ebay, so please bear with us if we do sell out as we cannot always update the computer as quickly as the items sell. We buy direct from the importers so please feel free to contact us with your enquiries.
For further information credit card payment etc please feel free to contact us at our accessory shop - A C Services on 01278 663699 or email us :firstname.lastname@example.org.
Trading hours - Monday to Friday 9-5.30pm
Powered by eBay Turbo Lister