Details about NEW MINI OBDII Bluetooth Interface ELM327 V1.5 OBD2 Car Auto Diagnostic ScannerSee original listing
06 Sep, 2012 09:06:56 BST
Staines, United Kingdom
1/1Feedback on our suggestions
|Condition:||New||Type:||Code Reader/ Scan Tool|
|Computer Interface:||USB 2.0||Sub-Type:||Code Reader|
|Item Type:||Code Reader/ Scan Tool||Compatability:||OBD|
|Item Subtype:||Code Reader||Vehicle Interface:||16 Pin|
Mini CAN-BUS BLUETOOTH
OBDII Diagnostic interface scanner
Benz2001/02/03W203 C200K (ISO)
-1994-1996 GS all can do;Turbo Car for the year 1996-2000,only have speed and
TPS,can clear the DTCS)
Not available vehicle:
All items will be dispatched within 1 business day after receipt of payment via Royal Mail 1st Class service. It will takes 2-3 days for delivery. But, The transit time is highly depended and provided by Postal Service, if you have any problem , please contact us.
Guarantee for returns in 7 days.
Q: This battery which I just received isn?t charging well, is it a defective battery?
A: New batteries are hard for the device to charge, as they have never been fully charged and therefore "unformed". Sometimes the device's charger will stop charging a new battery before it is fully charged. If this happens, please turn off the laptop and remove the battery from the device and then reinsert it. The charge cycle should begin again. This may happen several times during the first battery charge.
However, if this doesn?t work, please email us to confirm the problem. (Providing us the part# of your original battery and the model# of your device will be highly appreciated)
Q: I have discharged the battery to zero volts, and fully discharge and fully charge as your instruction, but the battery can not charge to 100% capacity.
A: Our battery pack is made up of several cells. If you discharge the battery to zero, what will most likely happen is that one or more of the cells will "reverse" because they are weaker than the other cells. The reversed cell begins to accept a "backwards" charge from the other better charged cells around it. This will kill the battery. So we should stop the discharge at one point, rather than letting the pack slump down to zero volts.
In the meantime, when the battery is at its full capacity, we should not plug the AC adapter to trickle charge the battery. It will overcharge the battery.
Note: Over discharging and overcharging the battery will damage the battery.
Q: What is batteries? memory effect?
A: A condition that occurs when a battery is charged to the same level several times consecutively (before being fully charged). The battery develops a chemical "memory" of that level and will not allow a charging past that point. You can avoid this through several complete discharge and recharge cycles.
Q: How long will the battery last?
A: It is unscientific to generalize a battery's life because it is related to CPU power, screen brightness, and the specific situation under which you use it. If the capacity of the battery is the same as your original one, it can perform almost the same as your original battery.
Q: I have the original battery nominal voltage is 14.4V or 14.8V, and the one you are selling only a nominal voltage 10.8V or 11.1V but indicated the same models. How should I choose?
A: The safe working DC voltage for a laptop range of 5.5V to 24V. We all know that we are using lithium- ion batteries, and lithium-ion battery's characteristics are: the voltage increases when charging and decrease when discharging. For example: for a nominal 11.1V battery, it can provide a practical and effective operating voltage range: 9V-12.6V diverse from charging to discharging. According to DC power supply design principles, all manufacturers of laptop computers are designed so that the power supply circuit board, so whether you are using the original battery nominal voltage is 10.8,11.1 V, 14.4V, 14.8V or between them can all be used interchangeably, and are safe, you can rest assured that use.