Solderless Spring Clamp Terminal Blocks
Want a problem free, no tools simple way to wire your connectors together? Don't want to have to solder your joints or use permanent or screw down terminals or crimps? Not a problem.
With our Modiify Spring loaded connector blocks we have solved the common problem of the everyday DIY enthusiast wanting to wire up some mains connectors, some car LED strips or amplifiers, speakers, lighting, repair laptop cables or PC cables, or any other wire connection you will ever need.
Simply get the ends of the wires you want to join together, push them into the hole and pull down the lever to create a solid RoHS compliant connection in seconds. Usable on mains electricity right down to microamp tiny wire and LED connections all in the same block!
The most common uses our customers have for these connectors is wiring LED strips into cars without the need of any special tools. Just push the LED wire into the block and push the lever down, then the other end of the wire (usually from the cigarette lighter) into the other end and away you go!
Want to remove the wire, replace a broken part or made a mistake? No problem, just pull the lever up and release the wire. Simple, easy and quality wiring.
Compliant with BS7671 17th Edition
Modiify connectors meet the most stringent UK and international standards including the electrical requirements of BS7671 17th Edition. Installers can be totally confident that using these connectors enables them to follow 'best practice' procedures and fully comply with the most up to date safety criteria.
|Wire size clamp range
||0.08 - 4 mm² (28-12AWG)
|Measured voltage EN
|Measured shock voltage
|Current intensity EN
|No. of connection Points
|No. of potentials
Recommended Strip Length 9 mm
2x Spring Clamp Terminal Blocks
If you have any questions don't hesitate to contact us at firstname.lastname@example.org