|
30 METRES
PROFESSIONAL GRADE TELEPHONE EXTENSION KITS THAT DO NOT REQUIRE THE PROFESSIONAL
Our
professional kits are suitable for both Voice and Data applications
Yes it is
now possible to achieve the same professional installation as your service
provider without paying those extortionate prices These kits do not require any wiring into the master socket and are far superior to the factory made multi strand extensions available everywhere
Most factory made telephone extensions use
multi-strand cables which can drastically affect the speed of your broadband
connection and also the sound quality on your Telephone
The longer those factory made extensions are the
worst they perform
Our professional kits only use Solid Core Twisted
Pair BT Specification cable
All telephone companies use solid core twisted pair
cables to ensure the best possible clarity and best internet connection speeds
at all times
Why wonder if your slow connection speeds are due to
the cable you are using when you can simply fix it yourself
Using this type of kit for your extension is the
equivalent of moving your computer and modem down to your master socket as
there is minimal signal loss
Your existing telephone cable travels a very long
distance to your home with minimal degradation of the signal
This is only possible as the correct type of cable
is used
Most internet problems are created by the end user
not using the correct cable to extend the service from their master socket
If you need to extend or relocate your Telephone, Pay
Point, Fax Machine, Communicating Alarm, Broadband or Sky Telephone connection then this is
the kit for you
Save yourself £££s while achieving the same
professional finish
This Part Assembled Kit includes
One fitted Sky Telephone / BT style plug that creates an additional socket (2 at Master) A BT Specification wall mounted white mini-extension telephone socket (BT 2/3A)
A length of High Quality 2 Twisted Pair solid
core telephone cable (length shown above)
Enough (bagged) black cable clips to complete
your installation
2 Black and 2 White cable entry bushes to
ensure a tidy installation (enough for the cable to be installed through 2 walls)
These also prevent cable damage when the cable
is installed through walls
We also provide full installation instructions
Here
is a brief installation guide for an external cable run
Internal
installs are even easier
- Safely
drill out from a point close to your existing telephone socket (do this from
inside to outside)
- Insert
the white grommet into the hole created on the inside for a tidy trim.
- Feed
the bare ended cable from the inside of your home to the outside through this
grommet leaving a slight amount of cable for movement of the prefitted plug
(get an assistant to pull all the cable through from outside)
- Feed
one of the black grommets onto the end of the cable from the outside and tack
the cable to your new desired location.
- Drill
your second cable entry point from the inside out as you did the first.
- Fit
another black grommet on the outside hole created and feed the cable into your
home from the outside then finish off clipping the cable to the wall.
- Fit
the last white grommet over the cable and cover the internal hole created at
the new extension location.
- Cut
the cable to length and make the last connection following the instructions
supplied.
- Test
the extension and don't forget to give yourself a pat on the back for a job well done.
We
sell a similar kit with a surface mountable wall box if preferred but both kits
give the same result.
Please have a look in our shop using the links below for a wide variety of cables and accessories
|