Details about MICRO MESH / MICROMESH POLISHING KIT 9 SHEETS 6" X 4"See original listing
20 Nov, 2011 19:00:50 GMT
Mydroilyn, Ceredigion, United Kingdom
New: A brand-new, unused, unopened and undamaged item. See the seller's listing for full details. See all condition definitions- opens in a new window or tab
The Cheapest micro-mesh in the world, I now supply many other ebay sellers!!!!!!!
All 9 grades of GENUINE micro_mesh (not stencilled inferior products)
please see our other items.
Nine six inches by four inch sheets (6in x 4in). One sheet in each of the following grades:
1500 regular x1
1800 regular x1
2400 regular x1
3200 regular x1
3600 regular x1
4000 regular x1
6000 regular x1
12000 regular x1
EUROPEAN BUYERS - due to difficulties with Royal Mail deliveries we are now only offering the International Signed For postage option. Unfortunately a lot of our shipments to the EU are going missing . We apologise for the rise in postage prices however we do not have any other option.
The specifications are below
All types of MICRO-MESH™ are manufactured utilizing Ultra-Flex technology. Each type is long lasting, cushioned, extremely flexible, and re- useable. The Ultra-flex properties of MICRO-MESH™ allows it to conform to shapes conventional products cannot, giving you additional finishing options. Sheets with pressure sensitive adhesive backing can be ordered so that you can cut the MICRO-MESH™ to specific shapes, allowing you to adhere it to most any polishing device.
All formats are made with large, very uniform crystals that recede into the Ultra-Flex matrix as pressure is applied, allowing the crystal tips to all line up so they are level with the part being polished. This technology provides a more brilliant, consistent finish.
Ultra-Flex technology reduces crystal fracturing making it a long-lasting, high quality abrasive like no other on today's market. It also reduces heat generation that can wear out the abrasive crystals and cause orange peel, pitting or other surface imperfections in the part being polished.
MICRO-MESH™ THE NON-ABRASIVE ABRASIVE
Micro-Mesh™ is what we like to call a non-abrasive abrasive. It is considered a cushioned abrasive in fact.
Conventional sandpaper is designed to be aggressive so that it will dig deeply. In its manufacture the crystals are electrically charged so that they will stand up. They are locked into a hard resin and when you apply the paper to a surface it will literally tear in and remove the substrate of the material you are sanding. The crystals cut in a negative raking motion, leaving inconsistent scratch patterns.
Micro-Mesh™ does the opposite. The backing is long lasting cloth to which an ultra-flexible cushioning layer is applied. This cushioning layer will determine how far forward you can push crystals before they will penetrate the cushioning layer. On top of this layer, we have a very resilient glue, not a hard resin, but a completely flexible glue that will hold the crystals while allowing it to move and rotate. The crystals can turn in any direction without coming loose. When you start to apply pressure to sand with Micro-Mesh™, the crystals will go into the cushioning layer while beginning to cut a bit. If you push harder, they will go further into the cushioning layer, which serves as a safety valve. It determines how much pressure you can exert in a doward direction. Instead of a deep scratch that sandpaper makes, Micro-Mesh™ produce a refined scratch that is close to a RMS of 1.0. The cushioning layer also allows the crystals to cut with a planing motion that leaves an extremely consistent scratch pattern and allows you to achieve extraordinary levels of gloss.
Where conventional abrasives will take surfaces down 2 or 3 thousandths (.002 or .003), Micro-Mesh™ will take it down one ten thousandth (.0001) or less.
ULTRA-FLEX MICRO-MESH™ REGULAR
Use these products for finishing plastics, acrylics, polycarbonates, bakelite, fiberglass, gelcoat, urethanes, celluloid,laquers, fiberglass, cast polymers, soft woods, cultured marble, coatings, composites, and more.
Abrasive colors of this product range from dark grey to light grey. This material is made to be used wet or dry, is made with a flexible cotton backing with polymer emulsion cushioning layer and large micron graded silicon carbide crystals suspended in an ultra flexible resin bond.*Grades 8000 and 12000 are made with aluminum oxide crystals.
This material is available in the following 9 grades, from coarse, to fine:1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000*, and 12000* REGULAR.
1500 MICRO-MESH™ is equivalent to a scratch pattern left using 400 wet/dry, but is much more consistent.
Micro-Mesh is approved by Boeing/McDonnell Douglas, the military and FAA
Return policy details
All returns within 7 days.