A heavy duty professional 6 litre degassing kit designed for the degassing of materials such as silicone rubber, plaster, resins etc, and for the removal of air within intricately shaped molds.
The kit will comprise:
A steel chamber measuring 203mm internal diameter and 200mm high. The chamber is powder coated and fitted with a side mounted manifold. Fitted to the manifold will be a Vacuum Isolation Ball Valve, Air Admittance Ball Valve and a quality ‘Wika’ Glycerine filled, 63mm diameter, 0-1000mbar Vacuum Dial Gauge. Fitted to the top of the chamber is a Nitrile rubber ‘L’ gasket. After completion the chamber will be mass spectrometer leak tested.
A chamber top lid manufactured from 20mm thick clear cast Acrylic and flame polished on the edge.
A rotary vane single stage vacuum pump with a maximum pumping speed of 4m³/hr (2.35cfm), and a total final pressure of 2mbar (29.9 inches ). Voltage and power are 240 volts 50-60Hz, 0.15 Kw. The vacuum pump is fitted with a fused 3 pin mains plug. Time to evacuate the 6 litre chamber (empty and clean) with the above vacuum pump to a pressure of 2mbar will take approximately 34 secs.
2 metres of clear plastic 10mm bore vacuum hose together with hose clips are supplied with the kit.
2 cardboard 450ml mixing containers.
12 months warranty.
Prices include VAT.
Shipping price to mainland UK only.
ALL ITEMS CAN BE PURCHASED SEPARATELY
14 Litre and 23 Litre Vacuum Degassing kits are available to hire.
Contact us for details.