The perfect sound system setup, aimed at commercial installations, ideal for shops, factories, supermarkets and more. This package has been carefully tailored to provide ultimate sound acoustics within its environment. Once more, our packages are quick and easy to install, saving you the expense of booking costly professional audio technicians.
With the supplied hanging pendant speakers installed, these can easily be connected to the amplifier (set in another location) that can have a chosen audio source (Laptop, Mp3 Player, Tablet and more) feeding in via the supplied Mini Jack to RCA Phono cable. An easy to install, luxury for the home, at an amazing price you will find hard to beat!
Just how do 100 Volt Line systems work? Multiple speakers can be connected to the supplied amplifier, how many you can connect will depend on the power output of the amplifier and the power / setting of the speakers used. The total amount of speakers used can not go above the power of the amplifier. The best way to explain the speaker / amp configuration of these systems is to example an equation:
Typical 100 Watt System Setup Examples
1x Amplifier = 100 Watts - 16x Speakers @ 6 Watt Tap Setting = 96 Watts
1x Amplifier = 100 Watts - 33x Speakers @ 3 Watt Tap Setting = 99 Watts
Includes: 6x (952.427) Speakers 1x (952.967) Amplifier 1x (109.575) Cable 1x (801.053) 100 Metre Reel Cable (Details Below)
Black PS Series Pendant Speaker Wide Angle High Ceiling 100V Line
Wide dispersion spheroid 2-way pendant speakers for use with high ceilings where regular ceiling speakers would be positioned too high to be efficient. Each has a rotary switch on top for selecting 100V line tappings and 8 ohms operation. Ideal for function halls, large events, public house, clubs and more!
- Supplied with 1.3m Cable and Cable Hook for Hanging
- Selector for 4 x 100V Line Tappings + 8 ohms
|Speaker size ||125mm (5 Inch)|
|Dispersion angle ||140 Degrees|
|Frequency response ||50Hz - 20kHz|
|Rated power at 8 Ohms ||20W|
|Tappings ||2.5W, 5W, 10W, 20W + 8 ohms|
|Dimensions ||180 x 245mm Diametre|
Adastra 120W RMS 100V Line 4 Channel Mixer 8 Ohms Amplifier Music Sound System
4 channel mixer amplifier providing 100V line or mono 8 Ohms speaker output. Mic 1 channel has switchable Vox priority function and phantom power for the XLR input. Mic 2 has a jack input and Mic 3 jack input is switchable to line level. Channel 4 is twin RCA mono line level and a single RCA slave output allows the mix to be fed to subsequent amplifiers.
- 4 input channels
- Switchable phantom power (XLR)
- Switchable VOX mic priority
- 8 ohms and 100V line outputs
- Bass and treble EQ
- Peak and signal LEDs
- 2U 19" rack mountable
- Mains or D.C. operation
- Output power30Wrms
- Power : Battery12Vdc (5A)
- DC power30W
- Output power : Max.40W
- Output power : RMS < 2% T.H.D30W
|Power Mains ||230Vac 50Hz|
|Frequency Response ||100Hz - 12kHz (+3dB)|
|Input impedance : Mic ||1.8k Ohms|
|Input sensitivity : Aux/Line ||300mV (-10.4dBV)|
|Input sensitivity : Mic channels ||1.5mV (-56.4dBV)|
|Signal to noise ratio : Line ||>75dB|
|Signal to noise ratio : Mic ||>70dB|
|Output : Line ||1V @ 600 Ohms|
|Outputs : Speaker ||8 Ohms & 100V|
|Dimensions ||425 x 88 x 230mm|
This is a well made mini (3.5mm) stereo jack plug leading to 2 RCA phono (red and white) plugs. Whether connecting an MP3 player to a surround sound or a laptop to a mixer this cable will be perfect for any situation.
- 1 x 3.5mm jack connector
- 2 x Phono plug connectors (red and white, right and left connections)
- 1.2m lead
Stranded Figure 8 Speaker Cable - 100 Metre Reel
A highly flexible, figure 8 standard speaker cable ideal for creating your very own personalised speaker cable. There are polarity line indicators to make it easy to connect the left and right lines to the connectors. You will receive a 100 meter reel so cut it to the lengths you require.
- CSA: 0.22m2
- Strands: 2 x 7/0.2mm
- Cable Dimensions: 2.0 x 4.0mm
- Sheath: Black
- Polarity: White
- Current: 1.0A MAX.
- Length: 100m
- Packed: Reel