SHOWER FORCE TURBO 2
TWIN IMPELLER SHOWER BOOSTER PUMP
* COMES WITH A 1 YEAR 'BRISTAN GUARANTEE *
This pump is ideal for use with any mixer shower from a gravity fed system.
Gives a much higher flow rate to your current system, creating a more powerful shower.
Ideal for pressure requirements up to 1.5 bar
Comes complete with built-in pre-wired flow switches to reduce installation time.
Boosts the power of a typical gravity fed shower by 12 times.
High quality motor and ceramic/carbon seals ensure long life.
Pump body is made from acetal plastic to resist limescale build-up.
Comes complete with four flexible hoses to suit, and full installation guide.
Dimensions are 260mm (W) x 190 (H).
Please note this unit cannot be used with combination/pressurised or mains-fed systems.
Individual pumps require a minimum head to operate automatically
(varies from pump to pump, usually 400mm vertical distance from water level in tank to handset),
if this is not achieved then a negative head kit may be required.
This pump will empty both hot and cold tanks more quickly than a standard system, please keep this in mind when selecting the size of your pump. You may want to check the capacity of both water tanks and think about how long and often the shower will be used.
This pump must be installed to all relevant IEE Wiring Regulations (BS 6700) and be protected with a Residual Current Device (RCD).
Isolating switch should be of the pull-cord type, if not it should be out of reach of the person using bath/shower.
It is advisable to fit easily accessible isolating and non-return valves to both inlets (where not already supplied). This will ensure future maintenance is both made easy and in compliance with Water Regulations.