NOTICE~ This is Unassembled Kit , FRAME ONLY ~
ST800 Carbon Fiber X-Copter 820mm Folding Hexacopter FPV Frame Kit
This product only includes the frame, no other config is
The plastic cover can effectively protect the electronic equipment,and reduce both thecost and the risk of flight
The fuselage plate is made of 1.8 mm carbon fiber composite plate, guaranteeing the strength, and meanwhile effectively reducing the payload of the aircraft,and increasing the flight time.
The center distance between the two supporting tubes is 155mm.please match the right gimbal according to the size.
when adjusting the gravity of the aircraft, loosen the set screws, slid the battery component to the appropriate
location, tighten the screws and the battery.
- Adopts high quality Carbon Fiber material ,with aluminium connector to ensure fastening effect
- With 6pcs 18mm Carbon fiber tube and motor mounting plate
- Landing skid connector:14mm carbon fiber tube for easy installation
- Landing skid Bracket :adopts 12mm carbon fiber tube,Compatible with most FPV PTZ
- with 2pcs extend board,for GPS,Receiver abd other devices installation
- Battery board adopts metal connector fastening,can adjust gravity via slider
- Empty Frame Weight:1090g
- Payload Capability:1500~2500g
- Flight Time:>10 minutes
- We recommend you use 15inch propeller
1.The machine mainly consists of carbon fiber composite materials, matching joints of aluminum alloy to ensure the strength of body as well as to effectively reduce the weight.
2. The six arms are with 18mm carbon fiber tubes and enhanced motor mount.
3. The connections of landing gear are formed with 14mm carbon fiber tube,which is composed with metal and carbon fiber,to be assembled and repaired easily.
4. Supporting tubes are made from 12mm carbon fiber tube, the span between tubes is 155mm, it accommodates with mainstream camera gimbal in the market.
5.There are two extended boards in front and rear of the fuselage,it is convebient for the installation of GPS, receivers and other equipments.
6.Battery frame is fixed by metal connectors,the canter of gravity of the aircraft can be adjusted by slidding the battery frame back and forth.