DRIVEN 2 AUTOMOTIVE IS PROUD TO PROVIDE
FAST SHIPPING WORLDWIDE - INTERNATIONAL CUSTOMERS WELCOME
12 MONTH REPLACEMENT GUARANTEE
YEARS OF EXPERIENCE - EXPERT FRIENDLY SUPPORT
FAST AND FREE SHIPPING TO ANY ADDRESS IN THE UK
GENUINE DRIVEN 2 AUTOMOTIVE - DA-27 MOTORSPORT FUEL PUMP
Our DA-27 is a custom manufactured high specification Fast Road / Racing fuel pump compatible with a wide variety of high performance car makes and models. It will provide enough fuelling for up to 500 BHP.
These pumps are being used all over the world and have been sold by us for years. They use a 15mm fuel hose for the inlet and an M12 Banjo fitting on the non-return valve outlet, we stock both inlets and outlets in our shop.
As stated before, one DA-27 pump will easily support and provide fuelling for up to 400-500 bhp, if you're planning on racing with it then always use a twin setup so that you have a backup.
The DA-27 is ideal as an up-rated replacement fuel pump for any car or modifying/race car project, whether it’s turbo/supercharged or normally aspirated. If you're upgrading your turbo, injectors, cams, boost, internal polishing, weight reduction, balancing and transmission then spend money to upgrade your fuel pump!! “Remember, you can never have a big enough fuel pump! It’s bad news if you run lean!
The DA-27 has been designed and produced with no compromise. Be assured that you are buying a superb quality high performance part.
Many of our customers use these for race applications and mount them externally. However if you know what you're doing, you can get one of these to sit in-tank if you modify your fuel pump sender / housing as the DA-31 pump is methanol tolerant. You can literally just connect this up IN-LINE and it will draw from your tank. On most of our customers racing applications they've mounted their pump(s) in the passenger footwell or boot/trunk.
The inlet and outlet on the pump are parallel so matching the pump up on most vehicles is very simple. In some cases you might require an additional pipe joiner and fittings but no serious modifications will be necessary. However if you're not experienced then we advise that you seek professional help, after all, you're messing around with a fuel system at the end of the day.
Full Specification & Contents
- DA-27 Performance Fuel Pump
- Very simple to use/replace and fit, the DA-27 pump just has parallel IN/OUT and 12v power terminals
- Fuel Pump Wiring Kit (see below)
- Operating Temperature of Sub 0 to 80 Degrees
- Operating Pressure 0-7 Bar
- 8.6 Bar Safety Shut Off
- Very compact in design, around 20.5cm in length, 6.2cm in diameter, 1.2kg in weight
- Non return valve fitted to the outlet
- Extremely robust casing
- Interchangeable outlet fitting (M12)
- Polishes up very nicely
The DA-27 draws different amounts of electrical current (amps) dependant on operation pressure; here are a few readings for your reference:
- 6.7 AMPS @ 35 PSI
- 8.6 AMPS @ 60 PSI
- 9.4 AMPS @ 70 PSI
- 10.7 AMPS @ 90 PSI
- 12.7 AMPS @ 120 PSI
The FREE Wiring Kit:
This high quality wiring fitting kit will fit our DA-27 & DA-31, the Bosch '044' & Sytec injection out of tank 'inline' fuel pumps. It protects the electrical connections from rust, dirt and debris for trouble free performance.
- 2x Rubber Dust Cover Boots (13mm)
- M5 & M6 nuts
- M5 & M6 washers
- M5 & M6 crimp on terminals
- 2x Metal hose clips
Designed for motorsport use, no instructions are included.
If you're interested in larger quantities or bulk buys, please contact us to work out the best deal!
We also stock custom made inlet and outlet fittings, please get in contact or look in our shop for more information.
We have thousands of these in stock just waiting to go, so buy from the best with same day shipping and excellent customer service -> FEEDBACK PROVEN!
Payment by Card?
No problem - Just select Paypal as method of payment.
You do not need a Paypal account to pay by credit or debit card!
Forms of Payment / Shipping Details / Return Policy
Trade / Quantity Discounts Available - Email Us
Content © Driven 2 Automotive 2013, All Rights Reserved
All logos and trademarks are property of their respective owners of which Driven 2 Automotive have full authorised permission to use.