This listing has ended.

 
Posts to:
Worldwide See exclusions
Delivery:
 
Posts to:
Worldwide See exclusions

Details about  D2R D2S D2C HID Xenon Replacement Bulb x 2 8000K

D2R D2S D2C HID Xenon Replacement Bulb x 2 8000K See original listing
D2R-D2S-D2C-HID-Xenon-Replacement-Bulb-x-2-8000K
Item Ended
Item condition:
New
Ended:
20 Mar, 2013 17:42:28 GMT
Price:
£5.40
[
History:
]
Postage:
£2.00 Standard Delivery from outside UK | See details
See details about international postage here.  help icon for delivery - opens a layer
Item location:
default, default, Hong Kong

Description

eBay item number:
170622580172
Seller assumes all responsibility for this listing.
Last updated on  13 Oct, 2012 11:50:10 BST  View all revisions
UA .K.W
.daoR gniW iawK 44-04 ,.duB .dnI gniH poH maY 4 mooR
.gnoK gnoH .T.N ,gnuhC iawK
tluafed tluafed
港香

:enohP41450726)258(
:liamEkh.moc.oohay@crttmat

Item specifics

Condition:
New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is ... Read moreabout the condition
To Fit:

All D2S/D2R OEM headlights

Interchange Part Number:

D2C

Technology:

HID Xenon

Type:

D2C/D2S/D2R

Part Manufacturer:

D2S/D2R OEM

Model/ Series:

All Models

Manufacturer:

All D2S/D2R OEM headlights

Subtype:

D2S/D2R Headlights

Manufacturer Part Number:

D2S/D2R/D2C

Intended Use:

Direct OEM replacement

ProGear Tech Lighting

Visit my eBay Shop  

 

Package include:

2 x 8000K D2S/D2R/D2C bulbs.

18-month Warranty.

 

 

 

Package include:

2 brand new D2C bulbs.

18-month Warranty.

What is D2C?

D2C 100% compatible with both D2R & D2S

For other fitments, please visit the Bulbs Model Guide .

What is Color Temperature?

The color temperature is purely a scale to measure the color of the light. The higher the color temperature (degrees K) doesn’t mean a higher light intensity (lumen). The reality is the higher up the K value the lamps are the less bright they become. The common choose is 4300, 6000k and 8000, amid 6000K is close to the sunlight and most comfortable to our eyes, also benefiting for the driving.

 

3000K   - Golden yellow

4300K   - Sunset yellow

6000K   - Diamond White
8000K   - Iceberg Blue
10000K - Brilliant Blue 
12000K - Violet Blue

 

Features:

- 40% less power consumption than halogen Light bulbs;

- 4 times light intensity than halogen Light Bulbs 6000K 3200lm;

- Life Expectancy: 10,000 hours
- Easy Installation: 100% plug and play without any difficult

- Direct OEM replacement and Upgrade
- 35W HID bulb (This is what all OEM factory HID Systems Use).

- Certificate: TUV ISO 9001:2000, CE EC-Certificate.

- Great price but same quality for expensive OEM replacement.

 

Payment:

PayPal. Please verify you shipping address, due to security reason, your merchandise will ship to the address stated in PayPal ONLY.

Shipping & Handling:

No handling fees in addition to shipping charges. We will ship out the merchandise within 2 working days after payment. Delivery normally takes 7-20 working days to US, UK, Australia, 21-30 working days to Europe and the rest of the world. Please understand that the delivery time and the efficiency of the post offices and Customs of the concerned countries are out of our control. We must send it ASAP!

Your purchase will be shipped via Hong Kong Post Standard Airmail (Without Tracking number but we do have the post certificate and the concerned post office will inform us once item delivered). If you need tracking number, we suggest you add USD 2.00 for "Registered Mail" (Please do contact us first).

We are not liable for any custom duties of destination countries.

We do not ship to PO Box, Military, APO and FPO Address.

Return policy:

You can return unwanted merchandise within 30-day after the date you received it. Provided:

(a) you sends the product back to us via a traceable postal service (i.e. the post is signed for); 

(b) the merchandise is undamaged. We will 100% refund you. Buyer is responsible for postage of return unwanted product.

Warranty

Buy confidence. Our products come with 18 months warranty of all factory defects. If any component fails within warranty period, please do contact us directly. We will issue replacement free of charge. Buyers may need send the defective components back to us for testing and the postage buyers spent will reimburse if factory defects confirmed. Damage caused during installation and misuses are not considered as product deficiency and will not be covered by warranty.

Customer Services:

If for any reason you are not satisfied with your purchase, please contact us directly. We will reply as soon as possible and try our utmost to resolve the problem.

Feedback:

We greatly appreciate customer 5-star feedback and will do the same. We hope every buyer satisfies with our service and products. If, for any reason you are not satisfied with your purchase, Please kindly contact us, we will try our utmost to solve the problems. Leaving negative feedback or file a dispute prior let us the chance to correct the problems does nothing towards your satisfaction but mess up the problem and waste your time.

 

 

Troubleshooting

 

How to make sure the HID kit will work properly every time.

Turn the engine on first, before turning on the HID kit.

Do not turn the HID on and off frequently.

Do not install the HID ballasts near the engine nor anywhere the water can easily get onto.

Make sure the connectors of the HID kit are tightly secured to the stock harness.

 

Bulbs flicking during operation

Inspect all the connections between ballasts and vehicles wire harness.

Inspect all the connections between igniter module and HID bulb modules.

Disconnect all the connectors. Clean all connectors with alcohol. Wait more than 5 to 10 minutes to reset ballast micro-processer and then reconnect the connectors.

Inspect the fuses. Use at least 25 Amp fuse if both lights share the same fuse; Use at least 15 Amp fuse for each light if lights use separate fuses.

Determine if additional high-power relay wirings are required to provide sufficient power to the HID systems.

Do not loss mating or mis-wiring connections.

Disable DRL (Daytime Running Light) and/or Auto On/Off Headlamp features.

 

On-board computer displays light failure warnings when the HID lights are turned on.

Purchase the "Disable On-board computer warning feature" option with the HID system.

Inspect for electrical current instability. Install additional wire relay if necessary.

 

HID bulb modules won't fit.

Double check to see if you purchased the appropriate bulb type for your vehicle. You can refer to your vehicle’s owner’s manual for the bulb size. Some vehicles require an adaptor to hold the bulb in place.

 

HID turns on few seconds then both sides go out.

There is a possibility that the fuses are blown. Please check your fuses box according to your vehicle's user manual and upgrade the stock 15 Amp or 20 Amp headlight fuse to 25 Amp or up. The 25 Amp fuses are 100% safe for your vehicle and will not cause damage to your vehicle’s electrical system. 

Another reason is that lack of power and pulsing voltage when your ballasts are cranking may activate the safety circuit in the ballasts and turn one or both off to protect themselves.

Solution: check battery health and replace if necessary; reset ballasts by unplug the power wires and all connectors for 5 to 10 minutes; start engine with headlight off;  Install a wire relay harness.

 

Bi-xenon lights stay in low beam only and nothing happens when going to High Beam or they shut off in high beam.

This is a common problem associated with the H4/9007/9004 HID conversion kits because different configuration for (Ground / Low Beam / High Beam) polarity from the cars factory connector. You will be required to take a set of pliers and pull the pins out from the connector and insert them into your factory harness correctly to their positions.

 

HID will shut down itself sometimes.

Inside the HID ballast, there is a micro chip which is used to detect whether there is any potential problems, such as sudden high impulse or shortage of power input from battery or extremely high heat will trigger the self-protect and shut the ballast off temporarily. It takes about 5 to 10 mins for the micro chip to reset itself and the ballast will be working again. Once this happens, please remove the power  from ballasts and wait about 5 to 10 mins.

 

If the lights vibrate while driving

Check all connections between the bulbs & ballasts. Ensure that the bulbs are securely installed in the light housing socket. Check vehicle battery terminal. Some DC (direct current) ballasts are inevitable have vibration.

Determine if additional high-power relay wirings are required to provide sufficient power to the HID systems.

 

HID works when the engine is off, but if turning on the engine the HID will turn off itself.

For some newer model vehicles such as BMW, Mercedes and a few American models, they have onboard computers to restrict outsource components such as HID conversion kit or aftermarket MP3 Players. Therefore, the only way for such cars to install the HID kit is to install a canceller cable.

 

One or both light can't ignite initially. Bulb turns off after the vehicle just starts.
You MUST Disconnect the Daytime Running Light or Auto Switch ON function immediately before the actual HID Conversion. Due to the Steady levels of battery voltage is required at 12V or Plus before the initial Ignites of each HID Systems; you must prohibit the less voltage draw of car battery at HID s start time. Daytime Running Light is 7V or less power output, and auto switch on headlight is always turn on seconds right before the car to start the ignition to charge the battery, which means Battery is focus on charging the ignition and waiting for alternator to recharge it back to 12V. Therefore, in both situations, battery is drawing much less power than 12V to initially ignite the HID headlight. Please perform the following:
If you have Daytime Running Light please follow your car s service manual; disconnect the fuse or wiring of Daytime Running lights only.
If you have Auto Switch On Headlights, please switch the function to Manual Switch On headlights. To avoid further damages, always remember to start your engine before turn on the HID system!.

Determine if additional high-power relay wirings are required to provide sufficient power to the HID systems.

 

Only one light works, even though both lights are installed exactly the same.

1. The polarity (positive & negative) of one side might not match with the factory wiring harness.

2. Fuse might be blown on that side.

3. Malfunctioned parts.
Troubleshoot by: Check all connections between the bulb and ballast. Check the bulb that does not work to make sure there are no loose wires. Check the fuses. Use at least 25A fuse if the stock 15A fuse blows. Switch the bulb to the working one/side to see if the problem remains. If the issue remains, the bulb may be defective. Switch the ballast to the working one/side to see if the problem remains. If the issue remains, the ballast may be defective. If the HID system works properly, your vehicle connections, battery, alternator, etc. may have problems.

Determine if additional high-power relay wirings are required to provide sufficient power to the HID systems.

Disable DRL (Daytime Running Light) and/or Auto On/Off Headlamp features.

 

The colors or lighting effects of the two bulbs are different.

Usually, due to uneven leveling of the headlight housings, adjustment of the headlight housings is needed. Switch ballasts and bulbs to  see if the problem remains.

For new bulbs, there are chances that the colors are different for first couple hours of burning. The color will become normal once it’s been run for a short period of time.

Inspection Procedure: Inspect for damage in the light housing. Clean the lens of the light. Inspect the positioning of lights to ensure both are at the same angle to the road.

 

The HID bulbs changes color when first turn on.

This is totally normal. At the beginning, the ballasts are storing the power from the battery of the car. Since the power has not been stabilized yet, the bulbs might have different colors or even flicker a little bit. However, as soon as the power is stabilized by the ballast, the bulbs will become normal.

 

The HID works initially but starts to flicker or stop working sometimes.

Inside of the HID ballast, there is a micro chip which is used to detect whether there is any potential problem. Any potential problems such as sudden high impulse or shortage of power input from battery or extremely high heat will trigger the self-protect and shut the ballast off temporarily. It takes about 5 to 10 mins for the micro chip to reset itself . Once this happens, please reset the ballast.
Inspection Procedure: Please check the car battery. Check all connections between the bulb, ballast, & igniter. Check the vehicle battery terminal; check your upgraded fuse, they must be 25amp minimum. Remember, every connector have to be 100% well connected to each other

 

One light is brighter than the other.

Inspect for damage in the light housing.

Clean the lens of the light. Check leveling of the headlight housings, adjustment of the headlight housings if necessary.

Switch the failing bulb module to the working side to see if the problem remains. If the failing light now works, the Ballast and/or Igniter may be malfunctioned. If the problem still persists on, the bulb may be failed.

Inspect the positioning of lights to ensure both are at the same angle to the road.

Disable DRL (Daytime Running Light) and/or Auto On/Off Headlamp features.

 

Lamp Has Been Operating : Cool Down Time Insufficient (Hot Restrike)

When HID lamps are operating and the supply voltage is cut or interrupted, the lamps will require a period of time to cool and re-establish optimum starting conditions. It require from four to 5 to 10 minutes cool down time. The restart time varies with the degree of ventilation, ambient temperature, and draft conditions. The time from cool to able to start condition can realistically range up to 20 minutes. However, some newly design ballasts can overcome such issue and no cool down time needed.   

 

Just installed the HID system a few weeks ago, everything works out fine with system. But lately, the one or both Discharge Bulbs are began to flickering when starts!?"

Disconnect all the connectors immediately. Clean every connector with alcohol. Wait more than 5 minutes (reset ballast Safety Stages Chip) then reconnect or reinstall every connector. Then check all the connection between ballast and factory harness (Power Source); check all the connection between igniters and bulbs (yellow silicone connectors); check your upgraded fuse, they must be 20amp minimum. Remember, every connector have to be 100% well connected to each other. Do not loss mating or mis-wiring any connections. "

 

Business seller information

HID_tamttrc

Returns policy

Return policy details
30-day money back, Buyer agrees to pay the return postage.
Most Buy It Now purchases are protected by the Distance Selling Regulations, which allow you to cancel the purchase within seven working days after the day you receive the item. Find out more about your rights as a buyer - opens in a new window or tab and exceptions - opens in a new window or tab.

Questions and answers about this item

No questions or answers have been posted about this item.




00752

Place bid

Time left:
Current bid:
(Approximately ##1##)
Postage:
Import charges:
Your maximum bid:
Your maximum bid:
Please read the full listing. By clicking Confirm bid you commit to buy this item from the seller if you are the winning bidder. You will enter a binding contract.
By clicking Confirm bid, you are committing to buy this item from the seller if you are the winning bidder and have read and agree to the Global Postage Programme terms and conditions - opens in a new window or tab. Import charges previously quoted are subject to change if you increase you maximum bid amount.
Cancel
Loading...
Resume bidding, if the page does not update immediately.
Place bid
Review and confirm your bid
Bid confirmation
d
h
m
s
day
hour
hours
Free P&P
See item description
(Approximately ##1##)
(Enter ##1## or more)
(Enter more than ##1##)
Your maximum bid:
Increase maximum bid
Place bid
Confirm bid
Increase maximum bid
Cancel
Change bid
Close
, you've been outbid. Don't let it get away - bid again.
, you're the highest bidder on this item. Hope you win it.
, you're the first bidder. Hope you win.
, you're currently the high bidder, but you're close to getting outbid.
, this auction is almost over and you're currently the high bidder.
, you're the high bidder, but the reserve price hasn't been met.
Please enter your bid again.
Please enter a valid number as the bid price.
Enter an amount that is equal or greater than the minimum bid required. This can be found under the bid entry box.
Maximum bids can't be lowered once they're submitted.
This seller requires the buyer to have a PayPal account to purchase this item. Get a PayPal account here .
Your bid is greater than or equal to the Buy it now price. We recommend you purchase this item via Buy it now. If you still wish to bid, you may do so below.
Time left:
Current bid:
(approximately ##1##)
Your maximum bid:
(approximately ##1##)
Increase your maximum bid:
By clicking 1 Click Bid, you are agreeing to buy this item from the seller if you're the winning bidder. Learn moreabout 1-click bid - opens in a new window or tab
day
hour
min
sec
days
hours
mins
secs
(approximately ##1##)
Winning bid:
Starting bid:
Close
Congratulations The auction has ended and you're the winner.
The auction has ended, but the reserve price was not met.
Sorry, the auction has ended and you were outbid.
Good news, you're the highest bidder.
Sorry, you've been outbid.
You're the highest bidder, but the reserve price has not been met.
Please enter a higher amount than the current bid.
Maximum bids cannot be lowered once submitted.
Please enter a valid number.