DRIVEN 2 AUTOMOTIVE IS PROUD TO PROVIDE
FAST SHIPPING WORLDWIDE - INTERNATIONAL CUSTOMERS WELCOME
12 MONTH REPLACEMENT GUARANTEE
YEARS OF EXPERIENCE - EXPERT FRIENDLY SUPPORT
FAST AND FREE SHIPPING TO ANY ADDRESS IN THE UK
GENUINE DRIVEN 2 AUTOMOTIVE - DA-31 MOTORSPORT FUEL PUMP KIT
Our DA-31 is a custom manufactured high specification Fast Road / Racing fuel pump compatible with a wide variety of high performance car makes and models. It will provide enough fuelling for up to around 600 BHP.
These pumps are being used all over the world and have been sold by us for years. They use an M18 x 1.5mm thread screw-in inlet fitting which allows a 15mm fuel hose and an M12 x 1.5mm Banjo fitting on the outlet allowing an 8mm fuel hose. These fittings can be found both in our shop listed separately as well as all our other pumps we can supply.
As stated before, one DA-31 pump will easily support and provide fuelling up to around 600bhp on turbo applications, if you're planning on racing with it then always use a twin setup so that you have a backup.
The DA-31 is ideal as an up-rated replacement fuel pump for any car or modifying/race car project, whether it’s turbo/supercharged or normally aspirated. If you're upgrading your turbo, injectors, cams, boost, internal polishing, weight reduction, balancing and transmission then spend money to upgrade your fuel pump!! “Remember, you can never have a big enough fuel pump! It’s bad news if you run lean!
The DA-31 has been designed and produced with no compromise. Be assured that you are buying a superb quality high performance part.
Many of our customers use these for race applications and mount them externally. However if you know what you're doing, you can get one of these to sit in-tank if you modify your fuel pump sender / housing as the DA-31 pump is methanol tolerant.
There's less hassle for a user not having to fit an external strainer as we've managed to incorporate one inside the DA-31 pump. This is also something which you do not see on normal fuel pumps. It means less hassle and expense for you, you can literally just connect this up IN-LINE and it will draw from your tank. On most of our customers racing applications they've mounted their pump(s) in the passenger footwell or boot/trunk.
The inlet and outlet on the pump are parallel so matching the pump up on most vehicles is very simple. In some cases you might require an additional pipe joiner and fittings but no serious modifications will be necessary. However if you're not experienced then we advise that you seek professional help, after all, you're messing around with a fuel system at the end of the day.
Kit Contents (in detail below)
- DA-31 High Performance Fuel Pump
- Non return valve fitted to the pumps outlet (Included FREE)
- M18 x 1.5mm Anodised Aluminium Inlet Fitting with Sealing Washer - Suitable for 18mm Fuel Hose
- 12mm Banjo Outlet Fitting with M12 x 1.5mm Outlet Cap nut & Washers - Suitable for 12mm Fuel Hose
- Fuel Pump Wiring Kit
- Very simple to use / replace and fit. The DA-31 pump just has parallel IN / OUT and 12v power terminals clearly polarity marked
- Internal fuel filter / strainer
- Operating Temperature of Sub 0 to 80 Degrees
- Operating Pressure 3-9 Bar
- 10.3 Bar Safety Shut Off
- Compact in design, around 18.5cm in length, 6.2cm in diameter, 1.03kg in weight
- Extremely robust casing
The DA-31 draws different amounts of electrical current (amps) dependant on operation pressure; here are a few readings for your reference:
- 6.7 AMPS @ 35 PSI
- 8.6 AMPS @ 60 PSI
- 9.4 AMPS @ 70 PSI
- 10.7 AMPS @ 90 PSI
- 12.7 AMPS @ 120 PSI
The inlet in this kit is crafted out of high grade aerospace certified aluminium and anodised in blue for maximum protection to specific conditions. The Inlet will screw into the Bosch '044' (# 0580254044) and our ever popular growing ‘DA-31’ motorsport fuel pump.
It has an M18 (18mm) x 1.5mm thread on one side and a 15mm straight union on the other with a retaining lip to prevent hose slippage, we also include a free high quality sealing washer. The inlet is suitable for a 15mm fuel hose.
With a linear internal diameter of 12mm for maximum flow (same internal diameter through to each side), you will certainly achieve maximum performance; this is a true racing and aerospace quality part that won't let you down.
The Banjo Outlet
Our custom manufactured banjo's are crafted from high grade steel, the banjo's inlet side has an internal diameter of 12mm and it will connect onto the 12mm outlet of most Bosch, Sytec as well as our own DA-27 and DA-31 (See shop) fuel pumps.
The banjo's outlet side has been designed so that you can attach a 8mm fuel hose onto the barbed push-on fitting.
We also provide you with 2 copper washers and the required M12 x 1.5mm banjo cap nut.
- 1x Banjo Outlet: (I.D 12mm)
- 1x M12 x 1.5mm Cap nut
- 2x Copper washers for Cap nut
Pump Fitment List:
- Bosch 044 (0580254044)
- Driven 2 Automotive DA-31
- Driven 2 Automotive DA-27 (banjo only)
- Will fit any fuel pump with an M18 (18mm) x 1.5mm inlet thread and an M12 x 1.5mm outlet thread size.
The Wiring Kit:
This high quality wiring fitting kit will fit most DA-31, Bosch '044' & Sytec injection out of tank 'inline' fuel pumps. It protects the electrical connections from rust, dirt and debris for trouble free performance.
- 2x Rubber Dust Cover Boots (13mm)
- M5 & M6 nuts
- M5 & M6 washers
- M5 & M6 crimp on terminals
- 2x Metal hose clips
Designed for motorsport use, no instructions are included.
If you're interested in larger quantities or bulk buys, please contact us to work out the best deal!
We also stock other custom made inlet and outlet fittings, please get in contact or look in our shop for more information.
We have thousands of these in stock just waiting to go, so buy from the best with same day shipping and excellent customer service -> FEEDBACK PROVEN!
Payment by Card?
No problem - Just select Paypal as method of payment.
You do not need a Paypal account to pay by credit or debit card!
Forms of Payment / Shipping Details / Return Policy
Trade / Quantity Discounts Available - Email Us
Content © Driven 2 Automotive 2013, All Rights Reserved
All logos and trademarks are property of their respective owners of which Driven 2 Automotive have full authorised permission to use.