BIKE MINIATURE SENSORLESS COMPATIBLE
250W 24V 15A
This controller is compatible with 24v 10a 240 Watt
but is not compatible with 36v 10a 360Watt systems.
This is a compatible replacement controller for Powabyke Salisbury, Windsor & Milan.
(Swap phase wires i.e blue to blue, green to yellow, yellow to green, a
compatible throttle is also needed...see my other listings)
(BOTH HALL SENSOR & SENSORLESS COMPATIBLE)
ALL UK STOCK.
VOLT TESTED AND ALL WORKING FINE.
THIS CONTROLLER IS FOR HALL SENSOR
& SENSORLESS COMPATIBLE BRUSHLESS
ELECTRIC MOTORS ONLY.
THESE ARE THE BEST SENSORLESS CONTROLLERS I HAVE TESTED,
VERY SMOOTH AND
COMPACT WITH A NICE RAMPED ACCELERATION!
WITH SENSORLESS CONTROLLERS YOU ONLY NEED TO CONNECT THE 3 MAIN PHASE WIRES
(BLUE, YELLOW & GREEN) TO YOUR 24V MOTOR,
HALL SENSOR WIRES ARE NOT NEEDED!
MINIATURE SENSOR/SENSORLESS CONTROLLER DIMENSIONS
94mm-LONG x 51mm-WIDE x 29mm-HIGH
TAKE A LOOK AT MY E-BIKES, SPARES AND OTHER ITEMS...THANKS FOR READING!
PLEASE TAKE A LOOK AT MY FEEDBACK AND BUY WITH CONFIDENCE FROM AN E BIKE
NEVER met such a seller, very
very helpful friendly fast and knows his stuff. : Member ID acseadp ( Feedback score of 201)
Buy here in complete confidence!
: Member ID frequentlyansweredquestions ( Feedback score of 1311)
deal and prompt professional service - recommended : Member ID frequentlyansweredqs ( Feedback score of 1311)
class service from a first class ebayer you can trust this person AAA++:-) : Member ID mick6262 ( Feedback score of 644)
as described! Good Communications - eBay the way it should be. A** : Member ID mrdcrompton ( Feedback score of 591)
7 Day Return or
Returns or exchanges will only be
accepted for defective or damaged components upon shipment and must be
authorized before the product(s) is returned.
Shipping & handling fees are NOT
REFUNDABLE. For any exchange or refund, the product must be in its original
condition, including the box & packaging.
All components are checked for
quality before being shipped out. If you purchased any items which appear to
have a problem, please contact me.
If I cannot resolve the problem by
e-mail I will provide you detailed instructions on how to return the item for
repair or replacement only.
Please do not return
any items without contacting me to obtain clearance first.
Shipping fees are not refundable.
UNIVERSAL WIRING GUIDE FOR ALL MY CONTROLLERS
Hi. Is this controller compatible with the twist
throttle and peddle sensor you also sell? Thanks.
Yep the controller is compatible with the throttle
As mentioned this is a sensorless controller, meaning you only have to connect
the chunky green blue and yellow wires from the controller to the motor, the 5
smaller wires (Hall sensors)are not needed.
If you follow the wiring guide in the advert you shouldn't have any problems.
Hi just received the controller I bought from you
do you have a wiring diagram or could you tell me what each of the wires are
for the bike i bought has no connectors, many thanks.
I can tell you what each wire does, no problem.
Okay so looking at the top of the photo you have
the slightly chunkier wires these are your 3 main phase wires to your electric
motor. Your motor should have corresponding blue yellow and green connections
to the motor. So you can plug those together. If you do not have compatible
plugs you can purchase some cable terminal connectors from Maplin see link...
you can get them cheaper on ebay... 15a blocks will
be fine for your phase wires.
The next set of wires down are the black and two
red wires.... the chunkier ones are the power and return to your battery, the
smaller red wire is a key switch line (if your battery has a key or ignition
this wire connects to that).
Again if you do not have the appropriate compatible
connecter use a 30a terminal block for the main power connections
If you do not have a key switch line from your
battery (small red wire) bare the ends of both the main red cable and the key
switch line together and connect both wires to one terminal on the terminal
block, connect the other side of the terminal block to the battery + - red and
connect black - return cables.
The next set of wires are the hall sensor wires, 5
small wires 1 red, black, green, yellow and blue. If you do not have the
appropriate connector then use the terminal blocks again, use a small 5a
terminal block for these connections.
The small hall sensor wires connect to the hall
sensor pick ups in your electric motor there are blue, green and yellow wires
like your chunkier phase wires and also red + power and black - return to power
The next set of wires are red black and green
connected to a black plastic connecter... these are pedal assist PAS
wires...red+ power...green= hall signal...black - return
that is the sensor that is on your crank and
synchronizes with your pedaling.
The white wire on its own is a speed
limiter...leave this unplugged...plug it together and it limits your motor
The mauve/dark purple wire is a speedo signal
cable...leave this unplugged- you probably wont be able to use that.
The next set of wires are the orange and black wires on a white plastic
connector, these are brake cut out cables, both sets of brakes can connect
together and then connect to these wires...orange+ power black- return.
Lastly the red green and black wires connected to a white plastic connector are
for the throttle...
red + power green= hall signal black- return