This amount includes applicable customs duties, taxes, brokerage and other fees. This amount is subject to change until you make payment. For additional information, see the Global Shipping Programme terms and conditions- opens in a new window or tabThis amount includes applicable customs duties, taxes, brokerage and other fees. This amount is subject to change until you make payment. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. For additional information, see the Global Shipping Programme terms and conditions- opens in a new window or tab
An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned and repaired to full working order and is in excellent condition. This item may or may not be in its original packaging. See the seller’s listing for full details.
See all condition definitions- opens in a new window or tab
“Haywire Custom Guitars offers “Pro” high-end custom guitar mods. Our customized Strats, Teles and Haywire series guitars and basses are true players instruments that put decades of the best technology from the past mixed down and tempered with quality parts, knowledge, experience, skill and innovative building techniques of the present. We then condense and distill it into a pure guitar on an outstandingly appointed instrument that is Gig-Ready!”
"Mahogany Blonde" Modified Fender body with a Reliced Fender
Special Noiseless-Hot SRV Special Wind Pick-Ups with a P-90 Pickup in the bridge
Treble Bleed Circuit, New Tuners & Hardware
Gloss Finished Neck PLUS: 5 Way Switching-3 Single Coil and 2 Humbucking Modes
guitar includes a Matte Black Pick Guard with-
All NEW Pickups,
Controls, Hardware and
Haywire Custom Shop Treble Bleed Circuit built in
The smooth-playing 9.5" radius Maple fret
board and shaft and has 21 medium jumbo frets, black
position inlays and an original Fender finish. Pure and singing signature sound
comes from new Vintage Noiseless Select Stratocaster SRV single-coil neck, middle pickups and P-90 bridge
pickup with five-way switching that delivers the natural uncolored sound of the pickups when dimmed on the HCS Treble bleed circuit which introduces a very stable and usable volume control all the way down.
This guitar sounds as good as it looks!
Call or write with any questions you may have:
843-347-5742 Haywire Custom Guitars
Custom Shop Axes-without Custom Shop Prices!
"Get Plugged In-Get Turned On!!"
Haywire Guitar Custom Guitars-Home of the "Gig Ready" Guitar!
This Haywire Guitar comes with one year warranty on our workmanship from Haywire Custom Guitars.
Call or write with any questions you may have:
843-347-5742 Haywire Custom Guitars
write with any questions you may have:
Instruments for Professionals
We Ship World Wide!
This Haywire Guitar comes with one year warranty on our workmanship from Haywire Custom Guitars.
This is a Natural Mahogany body newly re-finished with Fender Maple Vintage 9.5 "C" Profile neck with 21 frets and all
NEW: Hardware, New Tuners, Noiseless Pick ups, comes with Black Matte Pick guard, Jack, Strings, Knobs+Chrome configuration and wiring
The dialed-in intonationis guaranteed to please your ears.
Haywire Custom Guitar-Custom Shop
This is a Custom Haywire Modification with Noiseless Pick Ups added. It includes a.....Professional Setup for a working musician who needs accurate and comfortable playability. This is a beautifully refinished Fender medium light weight Mahogany body with a SMOOTH FRESH light Amber tint finished Haywire Custom Shop neck. A "NEW" ALL Maple 21 fret neckadded with a Rosewood fret board and "New" Satin finish and rolled edges with a 9.5" radius, and medium 6150 Dunlop frets.
PLUS! A Full Haywire 8 Point Gig-Ready Set-Up has already been completed on this guitar! The pick ups are specially made Vintage over-wound about 10% as follows:
SpecialStratBridge Pickups and P-90:
The 5 Way Switching includes-3 Single Coil and 2 Humbucking Modes!
Bridge P-90 Pickup DC Resistance: 9.10K
Special SRV Strat RWRP Middle Pickup: DC Resistance: 7.58K
Special SRV Strat Neck Pickup: DC Resistance: 7.04K
The Custom Vintage HOTSRV Pick ups added give it a Stevie Ray signature sound in any amp!
Pix and info on the hardware array and this Haywire Guitar Design by:
This Haywire Custom Shop neck features:
* Great Tone and Sustain
* Fingerboard .25" (6.35mm) thick Maple
* Headstock Adjuster for Fender neck truss rod
* Black Face & Side dots
Classic Walnut Stripe on Back of Neck
* 9.5" radius fretboard
* 25-1/2" Scale 21 frets
*Standard "C" Back Profile
OPTIONAL-Add a NEW Finished Warmoth Neck-just $245
Your specs as well as super wide and fat guitar necks to thin and slim!
Choose your neck specs from a super wide and fat guitar neck to thin and slim or anything in between. It's your neck-it's your choice!
Wood and Finish
Maple-Satin Nitro Lacquer finished
Right Handed with standard Strat or Telecaster Headstock-your choice!
White Corian or Black tusq-your choice!
Standard thin or your choice
6105 Stainless Steel Frets or your choice
Black Face Dots
25-1/2 or 24-3/4"
We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design.
Low-Low Action Set-Up!
The Tremolo is Decked for tuning Stability
The electric guitar ‘Floating” tremolo or "trem" bridge is Decked when the screws are tightened under the tremolo cover plate in the back of the guitar body. Reasons to deck:
1- Better tuning stability
2-Lower action can be achieved
3-Consistent action everywhere
If done properly the springs will be so tight that the tremolo will not move thereby rendering it blocked. The re-sale value is much better if you don’t physically change anything that can’t be reversed since lots of players still want a trem or whammy bar on their guitars. Fortunately there is another benefit. There is more sustain without the floating tremolo. If it’s blocked and it stays in perfect tune and it’s not permanent or invasive to your instrument and it’s completely reversible-then what’s not to like about that?
The neck is a Maple Neck with a great feel and Tone a width of 1-11/16" at the nut and a "C" profile.
The sustain of this very comfortable neck is excellent, with an even and balanced tonal range sure to please your ears. In terms ofquality, convenience and long term serviceability is Great!
You can adjust it without taking the neck off.
The 9.5" radius playing surface is very comfortable.
With a professional set-up already completed on this guitar, it plays exceptionally well.
You'll be pleasantly surprised!
It has a great feel for your fingers and/or slide playing. It is as factory fresh as they come and all NEW frets. The resonance is great on this guitar
This Guitar Neck Fingerboard Radius is 9.5"
The fingerboard, or playing surface of the guitar neck, is usually
curved or radiused across its width. The purpose of this radius is to
accommodate the natural ergonomic shape of your fingers when they are in
playing position. Comfort is certainly a major factor in selecting a
fingerboard radius but it is not the only factor. Musical Style... the
fingerboard radius must also allow you to play the style of music you
The guitar is set up, intoned perfectlyso any note or chord is in tune anywhere on the neck. The FRETS feel smooth, silky and they have a great tone. They have been leveled, re-crowned and polished. Installed are a new set of Ernie Ball Super Slinky strings 10-46 gauge for a great feel, good sustain and a great tone. This guitar has been played and thoroughly tested at Haywire Custom Shop.
There is no need to alter your technique as you move around on this guitar. The neck set up feels great and is consistent all the way up the neck. You can't get the same set-up when you buy off the rack in a music store. This is a **Custom** set up like you've never played and always wanted to. The Haywire Custom Shoptakes pride in the set up work we
do and I'm sure you'll be very pleased and surprised with the feel,
action and performance of this very fine instrument. We encourage you to
write us and let us know what you think.
ATreble Bleed modification ADDED
It allows you to roll off your volume without losing the highs.
Would you like being able to use the volume control... without sacrificing tone?
Now You Can... with a Treble Bleed Circuit Mod added on this guitar!
As you turn your guitar's volume down,the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an "edge" on it to a discerning ear.
Avoid this by using our:
Haywire Treble Bleed Circuit
It prevents the treble frequencies from bleeding off. It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Hand-soldered here in our shop:
between the input and output lugs of your guitar volume control pot, to
smooth out treble bleed.
Get more uniform tone from 1 to 10, and a more
rounded sound at low volume.
The pick-guard is a solid "Matte BLACK"
This guitar includes a Matte Black Pick Guard with-All Black Pickups, Controls and Haywire Custom Shop Treble Bleed Circuit.
All new controls and pots, switches + jack are new with **ALL NEW Hardware**. The pick ups are built for tone and longevity. They are slightly hotter than stock.
Installed are NEW tuners. They are Schaller-Gotoh Style Tuner, accurate and precise. *New* String tree for a smooth path to the nut for more accurate tuning. All of the hardware, screws, neck bolts and plate, knobs, are all **NEW**.
This is an excellent instrument for a serious player. If you take your playing seriously then take a great guitar to the gig with you. This instrument is very cool and will serve you, the professional player, for many years to come.
You practice hard and you work hard on your playing. So... get a great tool to work with!
Create no roadblocks to your success as a guitarist!
write with any questions you may have: 1-843-347-5742
1. The 4-axis Alignment of the guitar neck. Each guitar neck is checked and adjusted to insure that it is
true and straight to insure proper alignment on all axis. This step
insures proper action and allows for more accurate and easier guitar
tuning, playing and set-up in the following steps.
2. Inspect and Lube
the guitar tuning gears. Before installing the guitar tuning gears,
each one is checked thoroughly. Each tuning gear is
adjusted-there is no play in the mechanism. They are then lubricated to
insure smooth and even movement to make your guitar tune
3. Potting the guitar pickups-We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback
4.Prep the guitar body-Before
installing the guitar electronic components, great care is taken to
insure that all wires are properly routed, spaced, and grounded to
insure years of trouble free service with your guitar.
5. Level and polish the frets-This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.
6. Radius the guitar strings-Most
guitar necks have a contour over the top of the neck. We adjust the
strings to make sure that height of each string follows
the contour of the guitar neck.
7. Adjusting the overall guitar string height and the action.Once
we set the contour and radius of the guitar strings,then to adjust the
overall height of the strings from the top of the frets to the bottom of
the guitar strings.
8. Set the guitar intonation-This
step is done twice. The intonation is set two times with a 24 hour
seat-in period in between to allow the guitar to properly
re-seat to the new adjustments.
of the main functions of a Custom Guitar Shop should be to hit the
target the first time by building as close to a perfect instrument as
At Haywire our aim is getting better every day! The
job is only complete when you are completely happy with your guitar
because you'll use it every day. It needs to be comfortable and
light-weight enough to play for hours at a time in any situation without
The sound has to be clear and tone-great. It has to
be built to withstand the rigors of being on the road whether touring or
playing in local venues. It has to feel good to you when you play it.
The action and feel need to be consistent all the way down the neck so
you won't be forced to alter your playing technique as you travel around
on the fret board. A guitar players instrument needs to be in tune on
every fret so we pay careful attention to the intonation settings.
It has to look good for you and represent your sense of style. The
finish has to last for a long time to protect the wood from absorbing
moisture from the atmosphere as well as sweat from direct contact with
hard working hands.
The neck needs to have a truss rod that is
easy to adjust for seasonal variations in temperature as well as the
ability to transmit sound and add extra sustain for players. Strings
added need to be a comfortable gauge without too much resistance thus
making it easier to push down to the crown of the frets.
These are just some of
the things that we think about every day to make sure we get it exactly
right for guitar players who need a great instrument for their
passion-PLAYING GUITAR!! We're building satisfied players..... One
Haywire Guitar at a time!!
Haywire Custom Guitars is a unique Custom Shop of craftsman where we modify guitars from many manufacturers. We alter instruments to individual or personal specifications and offer the resulting upgraded instruments for sale. We are not a Gibson, Epiphone, Washburn, Wilkinson, Parker, Carvin, BC Rich USA, Jackson, PRS, Ernie Ball, Warmoth or Fender dealer nor are we affiliated with any of these companies. We do however buy used guitars from various manufacturers, new and used instruments from private individuals that we re-build, re-shape, re-sand, re-finish, re-top and customize ourselves for customers upon request. We upgrade electronics, necks, hardware and finishes and offer the finished products for sale. While there are no manufacturer warranties on the instruments we sell. We do however offer our own warranty for one year on our hand crafted finished products and craftsmanship on our finishing, customization and 8 point "Gig Ready" Haywire set-up processes. Fender, Stratocaster, Telecaster and Gibson, Les Paul, Buzz Feiten and related marks are trademarks of Fender Musical Instruments, Gibson, Buzz Feiten respectively and/or their affiliates. All other trademarks or registered trademarks referenced in this site are the property of their respective owners. Products offered via the Website are subject solely to their manufacturer's limited warranty, without additional warranty from Haywire Custom Guitars, and are protected by a variety of patents and trademarks. The guitars we specialize in rebuilding, changing, refurbishing and setting up are instruments with replaceable necks and bodies because we have more requests to add, change and modify these instruments more than any others. We do not build Fender guitars we add value to them in our "8 Point Gig Ready Process" or other modifications requested by our customers from time to time. We do however, replace and upgrade parts as required. We buy guitars from ALL manufacturers used and new and alter and modify them. As noted above several examples include: Gibson, PRS, Jackson, Bigsby®, G&L, The Bigsby® mark and Bigsby tailpiece designs are registered trademarks of Fred W. Gretsch Enterprises, Ltd. and many other brands as noted above and alter these and re-sell them as refurbished instruments. We change necks from one guitar to another to find the best combination. We buy guitars that are distressed and bring them back to a playable state and offer the resulting instrument for sale. We do not and will not copy or build knock -off products of other companies. We do not do anything that would dilute the brand of these manufacturers. The guitars simply leave circulation for a while for upgrading, neck straightening fret leveling and/or replacement, neck replacement, pick up replacement, refinishing, hardware replacement , a set up then re-enter circulation as a better and renewed instrument. We re-furbish, replace, renew, refinish and otherwise repair the guitars we purchase from manufacturers or private individuals for repair and/or restoration by adding new bodies and necks etc. You may also visit our eBay store. Calling or emailing us directly about a purchase of an item stocked in our eBay store constitutes doing business from our website. That purchase is subject to our rules and not eBay rules. However, please be aware that asking to purchase an item "off eBay" may constitute a contract breach with eBay. We want to maintain a good and honest relationship with eBay, compliance with eBay policies and integrity with all whom we do business. Therefore, in the event that occurs, we reserve the right to use a "substitute item". If you ask us to breach our agreement and bypass eBay and sell something from our eBay store directly to you we may instead send a product from our Haywire Custom Guitars website. The item we can substitute will be comparable and of like kind, quality and and/or in many cases, greater value. In this way we can leave our listing intact and eBay will benefit from a direct sale. Last point we'd like to make is; sometimes it is difficult to determine the origin of a part however we try our best to buy carefully and check the parts but if they have no serial numbers it can perhaps in some cases be impossible. Since we do not manufacture signature brand items we rely on the descriptions provided by our suppliers. Sometimes things may get by us or were not identified properly by a seller or supplier. In some situations it can be beyond our control but be aware we stand with our customers to make sure they are happy and satisfied with either the purchase or return and make it right to their satisfaction. We will be glad to refund any money for mistakes that can occur occasionally under those circumstances. We will not knowing sell the wrong products or parts. Returns will not be accepted however on guitars tampered with, opened, changed, modified, liquids spilled on and otherwise missing parts or purchased simply for perusal by competitors to disassemble and return. With prior approval and acceptance of item, returns must be sent immediately within the policy period for returns and specified days in listing. We are selling our set up skills, modification skills, our ability to identify which parts make the best fit, action set, finishing skills, restoration and design skills, and honor the custom requests from individuals who have their own guitars they would like modified. The photos on The Haywire Custom Guitars website are taken by us and are all types of guitars that have passed through the Haywire Custom shop at one time or another for service and/or modification as requested by the original owner or as determined to be necessary to bring the instrument up to an extremely comfortable and playable state as well as intoned as necessary. If you are unhappy with any experience you have had with Haywire Custom Shop please try and work it out with us before considering leaving negative feedback and I'm sure you'll be glad you did. We promise!
(estimated and based on max bid)To be provided at checkout
Your maximum bid:
Your maximum bid:
Please read the full listing. By clicking Confirm bid you commit to buy this item from the seller if you are the winning bidder. You will enter a binding contract.
By clicking Confirm bid, you are committing to buy this item from the seller if you are the winning bidder and have read and agree to the Global Shipping Programme terms and conditions - opens in a new window or tab. Import charges previously quoted are subject to change if you increase you maximum bid amount.