Heavy-duty Ceiling Mount for 37"-63" LED, 3D LED, LCD, Plasma TV's
Specs & Features:
-15 degree - +15 degree continuous adjustable tiltSwivel 180 degree left or rightUniversal hole patterns 810mm x 480mm (31.88 in x 18.89 in)Vesa compliant: 100x100, 200x100, 200x200, 400x200, 400x400, 600x400, 800x400Ceiling Profile: 1050mm-1620mm(41.33 in x 63.77 in)Support flat panel TV up to 165 LBEasy and fast installationColor: Silver
The universal hole pattern allows the wall mount to hold TV's from 37" to 63". Hanging TVs bigger or smaller then the specified size is not recommended.
The wall mount has a maximum load weight limit of 75kg or 165lb. This means that hanging anything heavier than 165lb/75kg is not recommended and not safe.
Once you hang your TV on this bracket, the distance between the TV and the ceiling will be 41.33in (folded mode) or 63.77in (fully extended mode). This will allow you to leave enough space for the cables that are plugged in to the TV. This feature is useful in particular when your cables are not coming out of your wall directly behind the TV.
Tilting option: This bracket will allow you to tilt the TV from - 15 degrees to 15 degrees. This feature is especially convenient if you need to change the angle of your TV upwards or downwards in order to adjust the monitor position according to your preferences. This option is available whether it's hung up or at the mid-lower level.
Swiveling option: This bracket allows to swivel a tv monitor 90 degree to the right and 90 degree to the left side. It provides you a unique opportunity to watch your TV from almost any location of the room.
This bracket is not only handy, but also safe. It has been tested for the presence of Lead, Cadmium, Mercury, Hexavalent chromium, Polybrominated biphenyls, and Polybrominated diphenyl ethers, which are hazardous for the human thehealth if used in above normal amount.
10FT HDMI Cable 1.3 Category 2 Certified Gold Digital HDTV Male to Male 1080p w/Ferrite Cores
Signal integrity is further enhanced by ferrites cores that filter out noise. Ferrite magnets for reducing line interferance caused by stray RF signals.
High-Definition Multimedia Interface (HDMI) is the first industry-supported, UNCOMPRESSED audio/video interface. This cable connects HDMI devices for DVD, satellite boxes, LCD, projectors, plasma and HDTVs. HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor or projector.
HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements.
|Specs & Features Connector Type: HDMI male to HDMI maleConnector Finish: GoldLength: 10FT# of conductors: 19Conductor Plating: TinShielding type: EMISupported Resolutions: 480i to 1080pHDMI Certified: YesHDCP Compliant: YesCEC Compliant: YesROHS Compliant: Yes1.3 Device Compatible: YesSupports DVD Audio: YesSupports SACD: Yes|
VW-1: YesVoltage Rating: 30VShielding level: TripleTemperature Rating: 80œ CRated Bandwidth: tested to 165 MhzSupports TrueHD & DTS-HD: Yes
White HDMI wall plate with 4 inch coupler cable. This convenient wall plate has a female connector on the front and in back for easy installation. Eliminate cable clutter by hiding your cables in-wall. This clean looking wall plate will give your home theater a professionally installed look. Wall-mounted HDMI connections for home theater systemsHDMI 1.3 compatibleHDMI connectionsSinglSELECT-gang wall plateFits into a standard singlSELECT-gang J-Box or P-RingAttractive Decora-style wall plateHDMI Single PortColor White