Yale Keyed Alike Anti Bump Euro Cylinder uPVC Door Lock Pair of Barrels Same Key

Yale Keyed Alike, kitemarked high security, Anti Bump, Euro Profile Cylinder Locks

http://www.upvcplasticsurgery.co.uk/ebay/YaleLogo1.jpg

Keyed Alike Door Cylinder Locks are sold in pairs and are often used for front and back doors to make life easier by being able to use the same key in both locks. Each pack comes with 2 locks and 6 Keyed Alike keys.

Our replacement Yale Anti-Bump door cylinder locks will fit all PVC-u doors with multi-point locks and can easily be fitted to upgrade security on older style doors. This advanced lock has been produced with today's soaring crime rate in mind to help combat the likelihood of intruders entering your home. This is a kite marked lock having undergone and passed the most rigorous of examinations, it has been independently tested and meets the British Standard BS EN1303:2005.

Available in Brass or Nickel

Choice of Cylinder Sizes: 35/35, 35/45, 35/55, 40/40, 40/45, 40/50, 40/55, 45/45, 45/50, 45/55 and 50/50






Features:

  • High performance British Kitemarked Euro Profile 6 pin Cylinder
  • Pack contains 2 x cylinders with 6 Keyed Alike keys
  • Anti-bump
  • Anti-pick and anti-saw features with hardened pins to protect the lock
  • Anti-drill
  • Anti-Manipulation
  • Fire Resistant
  • Exceeds the highest European security grade CEN 5 BS EN1303:2005
  • Ultimate key security with over 30,000 combinations






What's in the pack?

2 x Yale Locks

6 x Keyed Alike Keys

2 x Fixing Screw






How do I measure a door cylinder?

http://www.upvcplasticsurgery.co.uk/dzinehub/listingimages/door%20cylinders/door-cylinder-measurement-guide.jpg

The size of cylinder you need is determined by the thickness of the door and handle combination, for this reason there are many sizes available and you will need to be careful that you measure the cylinder accurately (one size will not fit all). It is possible to measure a door cylinder in the door, but to be sure it's best to remove it first.

Your new door cylinder should protrude by no more than 5mm from the handle back plates. It is most sensible to go for exactly the same size as you are replacing (unless your old cylinder was protruding excessively).

Measurement A - Measure from one end of the cylinder to the middle of the central screw hole.

Measurement B - Measure from the other end to the middle of the central screw hole.

 

Now check your measurements

Measure the overall cylinder length from end to end. The length of the cylinder should equal the sum of measurements (A) and (B) when added together.

For example: If measurement (A) = 45mm and measurement (B) = 50mm the size required would be 45/50 cylinder (95mm in length). No further measurements are required

Please note: These cylinders can be reversed when fitting therefore ordering a 45/50 cylinder is the same as ordering a 50/45 cylinder.






Features:

  • Open the door and unscrew the one fixing screw which is located on the lock faceplate (the strip of metal the full length of your door), in line with the bottom of the door cylinder.
  • Put the key into one side whilst holding the other side firm.
  • Turn the key and the cylinder should slide out, if it does not turn the key in the opposite direction and the cylinder should slide out.
  • Take your new cylinder lock and insert the new key and turn it until the cam is inline with the body of the cylinder. Insert the new cylinder into position and replace the fixing screw.
  • If the door cylinder is offset (i.e. 40/60, 30/50 etc) ensure the offset is protruding from the correct side. Check the operation of the lock before you close the door.

 

How far should a door cylinder protrude out of the door handle?

Your new door cylinder should protrude between 2mm and 5mm from the handle back plates, but due to the overall lengths of cylinders available this is not always possible. It is most sensible to go for exactly the same size as you are replacing (unless your old cylinder was protruding excessively).

 

Can I get keys cut locally for Yale cylinders?

Almost all local key cutting shops carry standard Yale key blanks.






What does Anti - Bump mean?

http://www.upvcplasticsurgery.co.uk/ebay/yale-antibump-cylinder.jpg

If you have not heard of Lock Bumping before you most certainly will soon, it is now one of the most common means of burglary in the U.K. 'Bump keys' are available to buy on the internet for quite small sums of money and they allow criminals to gain entry into your property without leaving any signs of a crime having been committed. This makes it incredibly difficult to claim for losses on your insurance policies as they usually require proof of forced entry.

There are just nine bump keys that are able to open every kind of cylinder lock on the market today and they are not difficult to make from scratch, we know we tried it.

The Yale branded high security Anti-Bump door cylinder offers a solution to overcome most of the traditional cylinder lock vulnerabilities evident today. This is a high security, British Kitemarked door cylinder lock that works hard to keep your property safe from unwelcome intrusion.