McAlpine
Compression Plastic Trap
The number 1 in Traps!!
The Best Prices here at Plumb-bay
Here at Plumb-bay we offer a very reliable service and great prices! We buy in bulk so we can offer you the best prices! Visit our shop to see more of our items at special discounted prices. Click to go to our shop Plumb-bay eBay Shop where you will find plenty more items at rock bottom prices!
*Check the title of this listing is for the correct item you require as we do all types of traps 11/4 and 11/2.
Trap Outlets (Multifit)
For use with Plastic Pipes to BS5254 and BS5255, Copper Pipe (metric or imperial) and Lead pipe. Fit as follows:
1) Chamfer inside of pipe (if required) to remove any burr or to enable Plastic Pipe to be eased over internal sleeve.
2) Remove Nut, Plastic Washer and Rubber Olive from Trap
3) Push Nut, Plastic Washer and Rubber Olive over pipe
4) Push Pipe over Internal Sleeve and Into Trap
5) Connect Nut and hand tighten
If plastic pipe is undersize, or out of shape, end of pipe may require to be heated to enable it to be pushed over the internal sleeve and into the Trap (or Fitting).
The above details refer to Traps manufactured principally for the UK market although these Traps can be used in other markets where the Waste Outlets and Waste Pipe are manufactured to British Standards.
A comprehensive range of Traps is available for other markets. Detailed information for country or Geographical Area is available on application.
Waste Traps and Waste Pipes
Building Regulations require that all points of discharge into a drainage system should be fitted with a trap (e.g. a water seal trap) to prevent foul air from the system entering the building. Under working and test conditions traps should retain a minimum seal of 25mm of water or equivalent.
Installation Requirements
All Traps, Waste Pipe, Waste Fittings and Soil Fittings When Installed in Buildings should be installed in compliance With:
1) The Building Regulations 2000 (as amended) England and Wales.
2) The Building Standards (Scotland) Regulations 1990 (as amended).
3) The Building regulations (Northern Ireland) 2000.
Alternatively the relevant recommendations of BS EN 12056 should be followed.
All traps should be accessible and provided with an adequate facility for cleansing, for example, traps that are capable of being readily removed or dismantled. In general a trap which is not an integral part of an appliance should be attached to, and be immediately beneath, its outlet. However, traps that are not connected to the appliance should be as close as possible. There should be no more than one trap on the discharge pipework from any appliance.
The price is inclusive of vat and a vat invoice will be sent along with your item.
We are a trusted member of the Federation Of Small Businesses and we are a Customer friendly, reliable seller offering 100% Customer Care and Satisfaction.
About Us
We are a family run plumbing and heating merchant based in Staplehurst, Corwnall. We operate on small margins so we are able to offer the very best prices. We buy in bulk and have access to over 5000+ items. We aim to input all our items on to our eBay store. If the item you are looking for can not be found on our store, please contact us and we will create one for you
Payment
We accept payment by: Credit or Debit Card: Call our Payment line on 0844 997 0270. We also accept Paypal, Bank Transfer. All Auction and "Buy It Now" prices include VAT.
Shipping
We take great care packaging every item to ensure safe shipment to you. We charge a postage fee only to cover our costs of materials and labour. Once your order has been processed and we have received cleared payment, your item will be dispatched as soon as possible. Please allow extra time if you are paying by cheque or paypal e-cheque. This item will be sent by Royal Mail and you will receive within 5 working days after your purchase.
Terms
We warrantee and represent that the goods are as described in the above listing. We specifically disclaim any implied warranties of title, merchantability, fitness for a particular purpose and non-infringement. Customers should satisfy themselves that any item choice made is suitable for their intended purpose or use. We pride ourselves on our customer service. In the rare event that you have a problem with your item please contact us and we'll be happy to help.
Returns
Genuinely faulty goods will be replaced or money refunded, however we must be advised of any faulty goods upon receipt of the item. It is the customers responsibility to pay for and ship the item back to us. If the item is found to be faulty, we will also refund the postage cost. If an item is returned not faulty it must be in re-sellable condition and Plumb-bay reserve the right to charge a re-handling charge of 15%.
Helpful Links
More Items!
)
