Tile Transfers - MOSAIC DIAMOND
Tile transfers are the MOSAIC DIAMOND shape only and so the background colour
is determined by the surface colour you apply it to.
These adhesive vinyl decals can be used on virtually any surface!
Our decals work great on walls, glass, floors, doors, ceilings, furniture, more!
Our decals can be used in the kitchen, playroom, living room, family room, bedroom, dorm room,
even the garage, vehicles, floors, bathrooms, shower walls, mirrors, shades, ceilings and more!
COMBINED DELIVERY PRICE AVAILABLE , AFTER PUCHASED ITEMS PLEASE WAIT FOR THE REVISED INVOICE,
OR YOU CAN SEND US AN INVOICE REQUEST .
Comes on application tape for easy fitting
Also supplied with Detailed Fitting Instructions
Ordering is very simple
Please use the dropdown
above the buy it now button above.
Please note the price will be change depending on size
Choice of Colours
Tile Transfers Fitting Instruction
There are 3 layers to your STICKER ( decal ) :
1. The top layer is your application film , this is a low tack adhesive that is stuck well to the front of your vinyl and is the last layer that is removed upon application.
2. The middle layer is your actual vinyl Graphic , this layer has a strong adhesive backing that will stick to your surface.
3. The bottom layer is the backing paper of the vinyl and is the first layer that you will remove upon application.
- Squeege of flexible plastic scraper
- Scissors or scalpel blades
- Lint free cloth
- Cleaning sollution
The surface must be cleaned thoroughly to remove any wax, dust or other contaminants.
Do not use white spirit
Lay decal face up on a flat surface and firmly squeegee over the entire decal to ensure that the application paper is adhered to the graphics correcty.
Carefully peel the application mask back to lift the decal away from the release liner.
Sometimes the graphic does not want to lift away from the liner, and remains stuck to it.
Watch carefully for this! If you see it happening, you must stop , back up, and press the application paper against the stubborn graphic piece with your finger.
Remove backing paper . Stick the decal . Firmly squeegee the entire decal.
Careffully peel the application mask at a sharp angle .Watch for graphic pieces that have not adhered to the application surface, and are lifting with the mask.
If this happens, you must back up and re-squeegee that area, or firmly press the graphic onto the application surface through the mask. Remove the entire mask.
Inspect the dacal for edges that are not fully adhered and press them into place with your finger.
Bubbles may be removed by piercing them with a fine needle and pressing out the air with your finger. Do not squeegee after removing tha mask or scratching will result.
PLEASE VISIT OUR SHOP FOR MORE TILE TRANSFERS