Details about Musical Fidelity KW 500 Dual Mono Integrated AmplifierSee original listing
“Overall excellent condition. On close inspection, there are a few insignificant marks. There is one ”... Read more
31 Aug, 2014 21:20:02 BST
[ 15 bids ]
Glasgow, United Kingdom
1/1Feedback on our suggestions
An item that has been previously used. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or an item that has been returned to the seller after a period of use. See the seller’s listing for full details and description of any imperfections. See all condition definitions- opens in a new window or tab
|Seller notes:||“Overall excellent condition. On close inspection, there are a few insignificant marks. There is one more obvious mark on the top of the front plate and one just to the left of the volume knob. Please see pictures.”|
|Type:||Integrated Amplifier||Number of Channels:||2|
|Brand:||Musical Fidelity||Audio Inputs:||Phono (MM), Stereo L/R RCA|
|Model:||KW 500||Audio Outputs:||Banana Speaker Jacks|
|MPN:||KW 500||RMS Power:||500 W|
You are looking at a pre-owned Musical Fidelity KW 500 integrated amplifier.
The amplifier is in excellent condition. On close inspection, there are a few insignificant marks. There is one more obvious mark on the top of the front plate and one just to the left of the volume knob. Please see pictures.
The KW 500 ships with remote control and all cabling. We do not have the original boxes or instructions: you can obtain instructions online. The units will be very safely packed in generic boxes for shipping.
Voltage RMS: 63.9 Volts 20Hz to 20kHz
Voltage peak to peak: 180.6 Volts
Power: 510 Watts per channel into 8 Ohms (27dBW), 770 Watts per channel into 4 Ohms
Peak-to-peak output current: 160 Amps
Damping factor: > 200
Output devices per channel: 8
Pre-output impedance: 50 Ohms
Harmonic distortion at 1kHz < 0.002% up to 90% power into 4 or 8 Ohms
Total harmonic distortion + noise, 20Hz to 20kHz < 0.007%
Signal / noise ratio > 102dB ‘A’-weighted
Input sensitivity for 350 Watts into 8 Ohms 330mV
Input impedance 220K Ohms
Overload margin 36dB
Channel separation > 70dB 20Hz to 20kHz
Frequency response 20Hz to 20kHz, +0, -0.0dB
20Hz to 60kHz, +0, -1.2dB
5 pairs line level RCA connectors,
1 pair phono (moving magnet) RCA connectors
2 amplifier channels via 2 pairs per channel binding posts.
1 pair RCA audio pre-outputs controlled by the volume setting
1 pair RCA tape record fixed line level output
Main unit: 26.8 kg, 59 lbs unit only, unboxed, 31.8 kg, 70.1 lbs in shipping carton
P.S.U: 18.3 kg, 40.3 lbs unit only, unboxed, 21.3 kg, 47 lbs in shipping carton
Main: 483 mm (19 inches) wide, 167 mm (6.6 inches) high including feet, 470 mm (18.5 inches) deep including terminals
P.S.U: 364 mm (14.4 inches) wide,167 mm (6.6 inches) high including feet, 278 mm (11 inches) deep including rear sockets
IEC type mains lead,
Power supply leads, main (two)
Power supply lead for pre-amplifier
Remote control (universal type)
Two batteries (type SUM-4, AAA, LR03)
You can see more information here:
This amplifier operates on 230V, 50/60Hz. This is perfect for the U.K. European Union and Australia. Rest of the World customers: please check the amplifier will work where you live before bidding.
Thanks for looking. Any questions, please ask.
After receiving the item, cancel the purchase within
Buyer pays return postage
Return policy details
Buyer pays for return carriage in all cases.