No More Ply - SBR Professional Tiling Primer 500ml
Professional grade , Multi Prpose , liquid latex , for use as a water resistant primer, flexi-additive and bonding agent.
Always Use when preparing wall and floor surfaces for tiling ,
Improves Water resistance , flexibility and long term durability of renders , floor screeds , concrete and patching mortar.
Directions for use -
To Primer No More Ply Boards dilute 1:3 and apply evenly to get a coverage of approx 12m2 . For a wet room area apply 2 coats.
All Relevant Items to use No More Ply boards can be found individually on our Ebay Shop These include - Mega Strength Adhesive . No More Ply Screws ( pack of 50 or 250) Scoring Knife & SBR Primer (500ml or 1Ltr )
For Next Day delivery order needs to be placed before 11AM and we need to be informed that you have take up that option to ensure we send it out for you in time.
(don't even think about using problematic substrates
like plaster-board, mdf, chipboard, hardboard and, yes, plywood)
It's the way we all did it. Plywood was used for over- boarding floorboards before laying or fixing ceramic tiles. However, this caused problems because if the grouting cracked or the sealant failed, water would creep in and rot the plywood. Also, there was a problem with fungal growth – this often reacted with the adhesive causing the tiles to become loose. The pro's amongst us thought the problem could be overcome by using marine grade plywood, but preservatives in this material migrated through the grout and gave it an orange stain. A minimum of 15mm plywood has to be used for overboarding floorboards – creating, of course, a dangerous step into the tiled room. Now there is a solution to eliminate all these problems. A unique, easy to lay, water resistant tile backer board that's just as effective on the wall as it is on the floor. That's NO MORE PLY.
No More Ply Mega Adhesive, 310ml Mega Strength Polyurethane Adhesive, 1 tube covers approx. 6-7 Board, Almost instant bonding to wood, metal, stone & concrete, Sets in 5-10 minutes to an exceptionally high bond strength, Waterproofs & reinforces joints, Replaces tape for all tile backer boards, Totally waterproof.
No More Ply Screws, Box of 200 25mm screws, Self countersinking, Self drilling, For use with No More Ply Boards, Steel countersunk, Hardened, Zinc plated.
No More Ply SBR Primer, Professional Tilers Primer, Multi-purpose primer, Waterproofer, Bonding agent, For priming No More Ply Boards, Dilute 1:3 for Boards and apply evenly, Coverage approx 12m2 per litre.
No More Ply Knife Carbide Tipped Scoring Knife, Professional scoring knife, For use with No More Ply Tile Backer Boards,Tungsten carbine tipped for extra long life, Outlast conventional cutting knives.
NO MORE PLY…
Dimensionally stable, unaffected by moisture absorption. The perfect substrate for all tiles in bathrooms and kitchens. Ideal for wet rooms. For total waterproofing use SBR Primer.
Only 6mm is added to the floor height when overboarding timber floors.
Board sizes available: 1200 x 600 x 6mm
Easy to handle
Handy 1200 x 600 x 6mm size. Will fit
into most small cars and vans.
Always store flat.
Easy to cut
Most cuts can be done simply with the NO MORE PLY Scoring Knife. For awkward shapes use a jigsaw with a tungsten blade.
Easy to lay
8 x NO MORE PLY screws per sheet and a small amount of NO MORE PLY Mega Strength Polyurethane Adhesive and it's laid!
Easy to fix on walls
Very cost effective
Inexpensive to buy.
Fast to lay.
Minimal damage during transportation, handling, storing and laying - excellent for all busy sites.
Ideal for use most electrical underfloor heating systems.
Contains no asbestos and will not burn.
Excellent sound proofing characteristics make it ideal for overboarding in apartments.
NO MORE PLY is easy to fix. Here's how…
a) Remove all old existing floor coverings. Screw floorboards (timber or chipboard) down firmly and sweep clean.
You are ready for NO MORE PLY.
b) Run two small beads of Mega Strength Polyurethane Adhesive on the back of NO MORE PLY. Lay in position and screw down using 25mm
NO MORE PLY screws. Screws must be inserted with a cordless screwdriver and eight screws per sheet is usually sufficient. Always stagger joints.
c) Run a small bead of Mega Strength Polyurethane Adhesive on the edge of the laid boards and lay the next board down fixing again with 25mm NO MORE PLY screws. This method seals and reinforces the joints. Warning: Mega Strength Polyurethane Adhesive is an amazingly strong waterproof glue. Always wear gloves and wipe off excess glue with an old cloth. Use solvent in case of spillage.
d) For straight cuts score with the NO MORE PLY Scoring Knife and snap. For curves and shapes use a jigsaw or nibble round pipes with tile nippers. 9mm boards may need 3/4 scores before snapping.
e) When the floor is complete, sweep clean and you are ready for tiling. Priming the boards with SBR Multi Purpose Primer (one part SBR to three parts water) will improve adhesion. Alternatively, wipe the surface of NO MORE PLY with a damp sponge just prior to spreading the tile adhesive. If undertile heating is being used, prime with one part SBR to three parts water before laying undertile heating and tiles.
Overboarding CONCRETE floors
a) NO MORE PLY is ideal for covering dirty, cracked, worn out concrete floors. Always remove loose material, clean thoroughly and prime with one coat of SBR primer (one part SBR to three parts water) before laying No More Ply.
b) Make sure floor is clean and free from all loose material. NO MORE PLY boards must be primed both sides with one coat of SBR primer (one part SBR to three parts water). For best results lay NO MORE PLY on single part flexible rapid set adhesive ensuring joints are staggered.
c) For straight cuts score with the NO MORE PLY Scoring Knife and snap. For curves and shapes use a jigsaw or nibble round pipes with tilenippers.
d) When floor is covered with No More Ply, allow adhesive to set – see adhesive manufacturer's instructions on setting time. Sweep floor clean and you are ready for tiling.
NO MORE PLY is also ideal for overboarding walls. 'Dot and dab' 6mm NO MORE PLY boards with single part flexi rapid set adhesive or Mega Strength Polyurethane Adhesive - ideal for overboarding new brickwork, plastered or previously tiled walls. In some applications plugging and screwing may be necessary. Priming the boards before tiling will improve adhesion.
The NO MORE PLY ten year guarantee only applies when correct installation procedures, as set out in this booklet, have been followed.
Download a brochure! - Click Here
- See more at: http://www.tiletown.co.uk/Accessories/NoMorePly.aspx#sthash.gN4xBV8o.dpuf
If you have any enquires please contact us on firstname.lastname@example.org
You can also phone up and place or pay for orders by calling 01142 512689