Decided to get these after a few cold but clear rides, after an hour my fingers were aching with wind chill and it was agony using the clutch lever, i'm new to bikes, pretty handy with tools though being an ex car mechanic, these Oxford grips are very easy to fit even for a novice, very clear instructions, there is even a few good Youtube videos on how to fit so you cant go wrong, fitted them to my Ducati Monster 696, i liked them so much, and considered them essential (for Spring in central Scotland) i ordered another set for my Suzuki GSXR600.
Verified purchase: Yes | Condition: New
I bought this as a "premium quality" product. The connectors are cheap and nasty and one of the terminal broke free inside the plastic holder. I spent 3 hours till I located the problem, then had to cut the connector off and hard-wire the connection. Cheap and nasty. I would have expected this from an unbranded £20 pair of grips....not from an Oxford product!!!!
Verified purchase: Yes | Condition: New
I learnt the hard way. Make sure your handlebars are in the straight position and not leaning to the left like us bikers like to leave them when we park up. If you leave the bars to the left when you install your new hot grips, when you come to use the glue it will run down the inside of the throttle housing and will quickly go hard, resulting in your throttle being glued tightly and you will be unable to open the throttle, thus rendering your hot grips no good. If this happens like I did then you have to unscrew the 2 screws holding your throttle together and you need to start scraping the excess glue that has run down into the housing being carefully not to damage the hot grips, once you have carefully scraped the excess glue off then your throttle should open and close as it should do. So remember to leave your bars straight or leaning to the right for the excess glue to run out. Hope that helps. Read full review
Verified purchase: Yes | Condition: New
Does what it says on the tin!! On the hottest setting you’d have to be high up on the alps at -40 to use it they get insanely hot, for us in the uk just perfect really, easy to install the only thing I would say is maybe use your own glue something slightly stronger and better as I used the supplied one and it come loose after a couple of weeks (maybe my fault who knows) but used some gorilla glue and it’s been fine since. I would definitely recommend these tho keeps your hands super toasty and warm with some decent gloves to boot 🤙
Verified purchase: Yes | Condition: New
Never used one of these before and I must admit that I absolutely love them. Installation was easy and took me just over 2 hours. Nice heat at 75%, never had to go over yet. And nice safety fuse that if case u forget to turn them off, it will do it after a couple of minutes or when voltage goes below certain value.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Grips, Covers & Pads
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Grips, Covers & Pads