Details about Raleigh Dynatech 600 early '90s road bikeSee original listing
10 May, 2014 20:04:10 BST
[ 23 bids ]
Sheffield, United Kingdom
1/1Feedback on our suggestions
Used: An item that has been previously used. The item may have some signs of cosmetic wear, but is fully ... Read moreabout the condition
|Frame Size:||54cm||Type:||Road Racing Bike|
|Wheel Size:||700C||Model:||Dynatech 600|
|Number of Gears:||16||Gender:||Men|
|Brake Type:||Caliper - Side Pull||Colour:||Anthracite Metallic|
|Suspension:||No Suspension||Frame Material:||Steel|
Thanks for viewing my Raleigh Dynatech 600 race bike from the early 90s. Re-listing with no reserve (probably set reserve with my heart last time it was listed). Bike was garaged for about 10 years & was going to be skipped, but had the frame professionally refurbished & painted by Vernon Barker Cycles Dronfield in spring of 2013 then rebuilt using a mixture of NOS & original parts. Rear was set to 130mm spacing to accept current wheel sizes also by Vernon Barker so you could run the frame with new mechanical groupsets with little modification.
Size : 54.5cm c-c seat tube
Raleigh Dynatech 600 - Reynolds 2060 main tubes (Reynolds 531 bonded into aluminium lugs)
Dynatech steel forks
Front mech : Shimano 105 (1055 series original)
Rear Mech : Shimano 105 (1055 sc original series 7 speed sis. Running as 8 speed friction shift)
Shimano 105 (1055 series) braze-on downtube shifters 7 speed sis & friction shift.
Chainset : Shimano 105 (1055 series) NOS square taper
170mm crank arm length
New bottom bracket
8 speed sram cassette
Sram 870 chain
Brake Levers : Shimano 105 aero originals with new hoods
Brake calipers : Shimano 105 (5600 series)
Rims : h-son tb14 ceramic grey 28 fr 32 rear
Sapim double butted stainless spokes.
Ti/carbon skewers (will include silver Ambrossio skewers in sale as well)
Veloflex Master 22s hand made tyres
New 1" threaded headset
3ttt traditional curve bars 400mm wide, velox cotton bar tape
3ttt podium quill stem 90mm
27.2mm fluted alloy stem
Selle italia turbo saddle (NOS)
Look Keo Easy pedals
Pair of Elite bottle cages
There are pics of frame spec & size chart i found on web, these are for info. bike has been ridden some 100 miles since rebuild & gets lots of attention. They had a bit of a reputation for being a bit "springy", i find it a really nice ride. The frame finish is perfect in Anthracite Metallic enamel paint. You can't find repo decals so the ones on the frame are not original (head tube badge is original). Decals have not been clear coated so could be removed using a hair dryer if desired. Please bear in mind some of the components are over 20 year old & have marks & show wear, but all work perfectly. The brake levers show worst scuffing & have tried show in pics. R-hand brake lever mechanism vibrates on rough road surfaces, but mechanically works fine.
This is a reluctant listing as I love this bike, but the wife starting to get fed-up with all the bikes in the garage.
Local pick-up as I won't post this bike.
Thanks for viewing & happy bidding any questions please call Darren 07826518291