Details about  Roland M400 Digital Mixing Console 48ch Cat5 WITH DIGITAL STAGE BOX

Here we have is the Roland M400 48ch digital mixing console in excellent condition complete with touring Flightcase, FROM ROLAND:

Complete with digital snake stage box (SB1608) to go with this desk for sale, please contact us should you require item.
Desk 8 XLR in 8 XLR out
Stage box (optional) has 16 XLR in 8 XLR out
Both desk in and out and stage boxes in and out can be used together.

Altogether, with this desk and 2 stage boxes will give you 40 XLR in and 24 XLR out at the same time.

V-Mixer Specifications
Processing
Channels: 48 inputs / 18 buses
Signal Processing: 56-bit
AD/DA Conversion: 24-bit / 44.1kHz or 24-bit / 48kHz
Network Latency: 2.8 ms (typical) *
* Total System Latency of audio signal from S-1608 inputs to outputs via M-400's REAC ports (A or B).
* Sample Rate: 48.0 kHz
* Effects : No insert effects
Connectors
XLR Inputs (1 to 8 ):
XLR-3-31 type (balanced with phantom power)
Talkback Mic Input:
XLR-3-31 type (balanced with phantom power)
RCA Inputs (L/R):
RCA Pin Type
XLR Outputs (1 to 8):
XLR-3-32 type (balanced)
Phone Output:
Stereo 1/4 inch phone type
Digital Outputs:
Optical type x 1 and Coaxial type x 1
REAC Ports:
RJ-45 EtherCon type x 3
USB Ports:
A type x 1 and B type x 1
Remote Connectors:
RS-232C (D-Sub 9 pin type) x 1*
MIDI (5 pin DIN type) x 2 (Out/Thru & In)
Other Connectors:
LAMP (XLR-4-31 type) x 1, Grounding terminal, AC Input
* Serial remote control is not available on version 1 firmware
Input Output Caracteristics
Frequency Response XLR output jacks (1 to 8): -2 dB / +0 dB (20k ohms load, +4 dBu)
Phones jack:
-3 dB / +0 dB (40 ohms load, 150 mW)
Total Harmonic Distortion + Noise:
XLR output jacks (1 to 8): 0.05 % (typical), Phones jack: 0.05 % (typical)
Dynamic Range XLR output jacks (1 to 8):
110 dB (typical)
Cross Talk@1kHz XLR input jacks (1 to 8):
-80dB (Pad: ON, Input gain: +10 dBu, typical) XLR output jacks (1 to 8): -100 dB (typical)
Nominal Input Level (Variable) XLR input jacks (1 to 8):
-65 to -10 dBu (Pad: OFF) or -45 to +10 dBu (Pad: ON)
RCA input jacks (L/R):
-18 to 0 dBu
Talkback input jack:
-50 to -10 dBu
Input Impedance XLR input jacks (1 to 8):
14 k ohms, RCA input jacks (L/R): 10 k ohms, Talkback input jack: 41 K ohms
Non Clip Maximum Input level XLR input jacks (1 to 8):
+8 dBu (Pad: OFF) or +28 dBu (Pad: ON), RCA input jacks (L/R): +18 dBu, Talkback input jack: +8 dBu
Nominal Output Level XLR output jacks (1 to 8):
+4 dBu (Load impedance: 10 k ohms)
Output Impedance XLR output jacks (1 to 8):
600 ohms, Phones jack: 100 ohms
Recommended Load Impedance XLR output jacks (1 to 8):
10 k ohms or greater, Phones jack: 8 ohms or greater
Non Clip Maximum Output level XLR output jacks (1 to 8):
+22 dBu (1 kHz, 10 k ohms load) Phones jack: 150 mW + 150 mW (1 kHz, 40 ohms load)
Residual Noise Level (IHF-A, typical):
-88 dBu (All faders : Min)
Equivalent Input Noise Level (E.I.N.):
-126 dBu
Other
Display:
800 x 480 dots Wide VGA backlit TFT full color
Power Supply:
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
Power Consumption:
95 W
Size & Weight
Dimensions:
749.0 (W) x 626.0 (D) x 229.0 (H) mm
29-1/2 (W) x 24-11/16 (D) x 9-1/16 (H) inches
Weight:
19.8 kg, 43 lbs 11 oz
S-4000S-3208

Number of Channels
32 in 8 out
AD Conversion
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
DA Conversion Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Frequency Response -2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic
Distortion + Noise 0.05 % or less
(Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz)
Dynamic Range
110dB
Cross Talk -80dB
Nominal Input Level -65 to -10 dBu (PAD: Off) -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
PAD 20dB On/Off
Input Impedance 20 k ohms
Nominal Output Level
+4 dBu, Max. +22 dBu
Output Impedance 150ohms
Recommended Load
Impedance 10 k ohms or greater
Residual Noise Level
(IHF-A, typ.) -90dBu
Equivalent Input
Noise Level (E.I.N.) -128dB
Network Latency 375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
Connectors Input: 32 (XLR type, balanced, phantom power, 4 ch input module x 8)
Output: 8 (XLR type, balanced, 4 ch output module x 2)
REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
Indicators EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
AC Power Supply
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
DC Power Supply +24 V (from optional external power supply unit : S-240P):
Power Consumption 130W
Dimensions 482.0 (W) x 336.0 (D) x 266.4 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
Weight
17.0 kg, 37 lbs 8 oz
Current Draw 6 A
Phantom Power +48 V / 14 mA (each input on SI-AD4, remote controlled)
Operation Temperature 0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
Accessories Power Cord, REAC cable (10 m, Cat5e crossover cable)
Adhesive-backed number label sheets, REAC Connector Covers
Ferrite Cores, Owner's Manual
* 0 dBu = 0.775 Vrms
S-4000H

Connector
Remote Connector: 1 (RS-232C, DB-9 type)
Indicators CLIP Indicators, SIG Indicators, POWER Indicator, REAC Indicator, CTRL Indicator, Level Meter
Power Supply
Supplied from connected device. (S-4000S, S-4000H; through the remote cable)
Dimensions
215.0 (W) x 87.0 (D) x 54.6 (H) mm, 8-1/2 (W) x 3-7/16 (D) x 2-3/16 (H) inches
Weight
0.8 kg, 1 lb 13 oz
Operatin Temperature
0 to +40 degrees celsius, +32 to +104 degrees Fahrenheit

If you have any questions please feel free to contact me on 07703 039733.

Posted with eBay Mobile