Please note that the carriage stated is to mainland U.K. only.
If you live in the Scottish Highlands or Lowlands or the Outer Hebrides, Please contact as the carriage charges may differ.
If you are not satisfied with any aspect of this transaction, please contact before leaving feedback at firstname.lastname@example.org
1 x 205ltr
Shell FM Hydraulic Oil 68
FOOD GRADE Hydraulic Oil
All offers considered
Approx 4 x 205ltrs in stock
Carriage charge is an estimate to MAINLAND U.K only
Give me your post code and I can quote you correctly
PLEASE SEE DATA SHEET BELOW
Shell FM Hydraulic Oil
Hydraulic oils for use in food manufacturing equipment.
Shell FM Hydraulic Oil 46 and 68 are anti-wear multi-purpose lubricants which are specifically designed for use in the food and beverage processing and packaging industry.
They are based on a careful blend of fluids and selected additives chosen for their ability to meet the stringent requirements of the food industry.
Registered by NSF (Class H1) for use where there is potential for incidental food contact. This product meets the guidelines (1998) of the US Department of Agriculture Food Safety and Inspection Service
(USDA FSIS) for H1 use (lubricant with incidental food contact). These products contain only substances permitted under US 21 CFR 178.3570, 178.3620 and 182 for use in lubricants with incidental food contact.
Plain and anti-friction bearings
General purpose lubrication including light duty gear boxes
Circulating oil systems
The base fluid has been selected for its ability to provide good lubrication under variety of applications.
Good anti-wear and extreme pressure characteristics
Good anti-oxidant properties
Good air release and antifoam characteristics prevent cavitations
Good water separation characteristics
Neutral odour and taste
Does not contain any natural products derived from nuts or genetically modified organisms (GMO).
Seal and Paint Compatibility
Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems.
Specifications and Certificates
"Incidental Food contact"
Registered by NSF (Class H1) and meet the USDA H1 guidelines (1998) for lubricants for use where there is a potential for incidental food contact.
Made only from substances permitted under the US FDA Title 21 CFR 178.3570, 178.3620 and/or those generally regarded as safe (US 21 CFR 182) for use in food grade lubricants.
To comply with the requirements of US 21 CFR 178.3570, contact with food should be avoided where possible. In the case of incidental food contact, the concentration of this product in the food must not exceed 10 parts per million (10mg/kg of foodstuff). In locations and/or applications where local legislation does not specify maximum concentration limits, Shell recommends that this same 10 ppm limit be observed, as up to this concentration Shell FM Hydraulic Oil will not impart undesirable taste, odour or colour to food, nor will cause adverse health effects.
Consistent with good manufacturing practice, use only the amount necessary to achieve correct lubrication and take appropriate corrective action should excessive incidental contact with food be detected.
Health and Safety
Based on information available, Shell FM Hydraulic Oil is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained. As for all oils, prolonged or repeated contact with the skin should be avoided.
For further information refer to the appropriate Shell Material Safety Data Sheet.
Protect the environment
Take used lubricants and empty packs to an authorised collection point. Do not discharge into drains, soil or water.
Handling and storage
All food grade lubricants, such as Shell FM Hydraulic Oil, should be stored separately, out of direct sunlight or other heat sources, from other lubricants, chemical substances and foodstuffs. Store between 0°C and 40°C. Provided that the product has been stored under these conditions we recommend that the product be used within 5 years from the date of manufacture.
Consult your local Shell Company for details.
Only accept new Shell FM Hydraulic Oil for use if the manufacturer's seal is intact.
Before opening the pack ensure the area around the closure is clean. It is recommended that it be cleaned with potable water and then dried with a clean cloth before opening.
Record the date the seal was broken. To prevent product contamination, always close the package after use. Upon opening a pack, the product must be used within 2 years (or within 5 years of date of manufacture, whichever is the sooner).
Shell FM Hydraulic Oil 46 68
Property Test method
NSF Registration No. 125263 124738
Colour - Colourless
Density at 15°C kg/m3 ISO 12185 864 867
Flashpoint °C ISO 2592 226 248
Pourpoint °C ISO 3016 -12 -9
Kin. Visc. at 40°C mm2/s ISO 3104 46.9 67.9
Kin. Visc. at 100°C mm2/s ISO 3104 7.0 9.0
Viscosity index ISO 2909 105 107
FZG-Test A/8.3/90 Failure load stage DIN 51354 >10 >10
These characteristics are typical for current production. Variations in these characteristics may occur.
Please note that here at Smith & Allan we have a full range of Vintage, Classic, Automotive, Haulage, Agricultural, Industrial and Motorcycle oils.
If you have a technical question on any oil in these fields, Please don’t hesitate to ask. Contact us through our on-line e-bay shop smith_and_allan , or contact our customer services on 01325 462228
WHY NOT TRY OUR AMERON, TEKALOID & COACH ENAMELS FOR TOUCHING UP OR RE-PAINTING YOUR VINTAGE MACHINES AVAILABLE IN MOST BS or RAL COLOUR RANGES
QUANTITY DISCOUNTS AVAILABLE
PLEASE ASK FOR FURTHER DETAILS
Delivery & Returns Policy
Items that are sent via the Royal Mail are out of our control once they leave our site. If the item does not arrive, the Royal Mail doesn’t class an item as missing for 15 days. Any item delivered damaged needs to be signed for as damaged. If this isn’t possible you will be required to send a photograph of the damaged goods and e-mail to email@example.com so a claim can be processed.
Payment is to be made by credit card, debit card or direct debit through PayPal, cheque, postal order or cash on collection. Please ask any questions before you buy, we are happy to help. If you buy an item in error we will happily refund you minus the cost of return shipping as long as the item is sealed and in the condition you received it. For orders that are cancelled or returned we will charge an 8% restocking and admin fee of the item price and we will not refund the cost of the original shipping. The return service used by you must cover the value of the contents, if not and the item goes missing you will only be able to claim the cover of service sent. We will not refund you the difference. If you receive a defective item please contact us immediately and we will exchange for a new item as soon as possible. Postage will be covered by us. All items are sent with postage insurance included in the shipping price. If an issue arises with non-delivery please note it takes 15 working days before a claim can be made, claims will be resolved as quickly as possible. You will receive a full refund or replacement product. Packaging may differ from those pictured.
Orders will be dispatched within 3 working days; you will be notified of order dispatch via email so please include your email address with your order. Delivery addresses cannot be changed after payment has been made. Items will be sent to your address in the order process. If you are using PayPal and wish to send to a different address than the one linked with your PayPal account, you must add the different address in the PayPal notes section of the payment. By purchasing from our website you are agreeing to the terms and conditions outlined. If you have any doubts you should contact us before purchasing.