I have here for sale a number of new, genuine, high quality Shimano cup and cone hub components. Shimano hubs are well known to be tried and tested, robust and durable, and are known to last a very long time if properly maintained, so it is worth replacing worn or damaged parts with genuine Shimano components where possible. Replacing parts is also much easier and cheaper than replacing the hub.
A) Freehub Body for Cassette Hub (15+17+18 in diagram above). This new Shimano freehub is compatible with the vast majority of 8/9/10 speed Shimano road or mtb hubs, and is compatible with all current Shimano, Shimano compatible and SRAM 8/9/10 speed cassettes. This freehub is not compatible with Shimano hubs made before mid 80's, DuraAce Pre-97/FH78XX/FH79XX series, RM30/35/60/65/66, Silent Clutch hubs, and Shimano freehubs that require tools other than a 10mm allen key for removal. It is a direct replacement for Deore M510, M525, M570, M555, C500, C501 and MC18 freehubs, and don't believe ignorant/unscrupulous sellers telling you that you must get a direct replacement (which is likely far more expensive or unobtainable altogether) for other compatible Shimano hubs to achieve perfect seal performance - you will achieve perfect seal in conjunction with those in the Locknuts, Seals and Spacers Pack and the Drive Side Cone and Bearings described below. This well sealed freehub is supplied with the hollow body fixing bolt and the freewheel body washer. Worn or faulty compatible freehub replacement simply requires a 10mm allen key and is much easier and cheaper than replacing the hub, since you won't need a new hub or rebuilding the wheel from scratch. Additionally, the drive side cup (for the hub's cup and cone bearings) is part of this freehub, so it will also replace that if your drive side cup is worn or pitted.
B) Drive Side Cone and Ball Bearings (9+16 in diagram above). This new Shimano drive side cone is compatible with hub model numbers M756, M752, M575, M570, M565, M555, M540, M535, M530, M525, M510, M330, A410, MX66, C901, C900, C501, C500, WH-R500, 5600, 5501, 5500, R505, IM50, T400, MC38, MC33, MC32, MC30, MC18, MC12. This versatile cone is supplied with 9 Shimano steel (1/4") ball bearings. For worn drive side cup replacement please see the Freehub description above.
C) Non-Drive Side Cone and Ball Bearings (11+16 in diagram above). This new Shimano non-drive side cone is compatible with hub model numbers M563, M525, M510, C501, C500, 4400, MC38, MC33, MC32, MC30, MC18, MC12. 16mm deep along the axle, with an integral dust shield of 25.5mm diameter, it may also fit other hubs. The cone is supplied with 9 Shimano steel (1/4") ball bearings.
D) Hollow QR Rear Axle 146mm (10 in diagram above). This Shimano hollow steel axle is suitable for the vast majority of Shimano and similar cup and cone mountain/hybrid bike quick release rear hubs, which have distance between rear lock nuts (or distance between the frame's rear dropouts) of 135mm. These axles are ideal for replacing bent or damaged M10 x 1mm threaded quick release axles of XTR, XT, SLX, LX, Deore, Alivio, Acera and many other similar cup and cone hubs of other makes. A bent axle will accelerate wear not only of the hub's cup and cone bearings but also the chain and sprockets, it can also cause brake rub sapping your energy.
E) Locknuts, Seals and Spacers Pack (3+4+5+7+8+12+13+3+14 in diagram above). The pack includes Shimano's 3.5mm and 4.5mm serrated locknuts, and spacers/washers of 3mm, 3.2mm, 3.7mm and 8mm as well as rubber seals and dust cover. They are really useful for building up suitable hub width to fit fork or frame dropouts.
F) Rear Quick Release Skewer (1 in diagram above). A genuine Shimano QR rear skewer with silver alloy lever for quick release rear hubs of mountain bikes and hybrid bikes (which have rear hub width or distance between the rear dropouts of 135mm standard). It will also work fine with quick release rear hubs of 8 speed or above for drop bar road bikes (where rear hub width or distance between rear dropouts are 130mm standard), but the skewer will protrude an extra 5mm at the nut.
All these parts are brand new never used, but may have cosmetic imperfection due to transport and storage. My prices are as low as can be. I do not offer discount on multiple items.
If you have any doubt about compatibility please contact me before ordering.
Thanks for looking!