Digital Controlled by reliable microcomputer for super-fast temperature rising and keeping steady.
Powerful soldering iron with top quality Japanese made heating element.
In hot air gun part, improved by adding auto/manual selection. In manual mode, hot air gun will keep running at set temperature when the gun is put on holder. It is convenient for frequent rework. In auto mode, hot air gun will start to reduce temperature when it is put back on holder. When the temp is lower than 100 deg C, the gun will turn to standby.
Large LED Displays to show real temperatures. Easy Operation. Enhanced Safety Features.
---The heart of this station is microcomputer processor and PID technology to trace temperatures on air gun and iron in real time and compensate temp precisely and quickly by built-in PID control program. So keeping temperature stability within 2oC and quick temperature rising to set value. ESD design of soldering iron to protect sensitive components.
---Designed for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components. Very good for electronics product, such as cell phone, repair.
---Dual large 3-digit LCD displays to track actual temperatures. Easy to adjust temp.
---Brushless fan in hot air gun provides large airflow to 120 Liter/min. Easy adjust the hot airflow with knob.
---Designed for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components. Very good for cell phone repair.
---Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode. Sensor on handle leads to operating mode (high temp) when picked up or to standby mode (low temp) when laid down. Avoid accident caused by human mistake.
---Dual hot air gun working mode: Auto/Manual selection.
---With short circuit, open circuit, over-temp and over-load protection.
---Extremely low noise, less than 45dB.
---Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
---Fits for heating shrink, drying, lacquer removal, viscosity removal, ice-out, pre-heating and glue soldering.
Input voltage: AC 220V / UK Plug
Hot Air Gun Specifications:
Power Consumption: 650W
Air Flow Type: Gentle Wind with Brushless fan
Air Flow Volume: <=120 L/MIN.
Temperature Range: 100 - 480oC
Temperature Stability: ± 1oC
Noise Level: < 45 dB
Soldering Iron Specifications:
Power Consumption: 70W, 24V
Iron: ESM design.
Temperature Range: 100 - 500oC
Temperature Stability: ± 2oC
-- 2 in 1 Rework Soldering Station 862D+, Two digital LED displays (show real temp.). 220V for use in UK. Metal case.
-- Powerful (650W) Hot air Gun for desoldering rework.
-- Powerful (70W) Iron and Metal Holder for soldering. Heating element is made in Japan.
-- Accessories and spare parts:
4x Air gun nozzles: 5mm, 7mm, 10mm round, 12x12mm square.
1x IC extractor.