• Fits most TV Screen: 30"~60", and some up to 65" TV
• Tilt:15° forward, 15° backward
• Swivel: 180º horizontal rotation
• Load Capacity: 88lbs / 40kg
• Iron thickness: 2.0mm
• Iron pipe thickness: 1.2mm
• Fits VESA mounting hole patterns Max to: 500mm x 400mm (20"x16")
• Distance from the TV to the wall: Max 20 inch(510mm), Min 4.3 inch(110mm)
• Brand: Sunydeal (Guaranty for high quality, unlike other unbranded)
• Multi-directional adjustment tilt, swivel and extend for perfect viewing angle
• Swivel 180 degrees for comfortable view angle in different positions, Swivel left and right for comfortable view angle
• Post-installation level adjustment allows the screen to perfectly level
• This bracket is made from solid reinforced heavy-gauge cold steel, tested to ensure security, safety
• Easy to install, Comes with full instructions and FREE FITTING HARDWARE
• (Note:Please kindly understand shipping may delay as the Holiday season.Shipping company will not deliver the item during Dec.24 2013 to Jan.01 2014.If you bid this item from Dec.24 to Dec31,you may not receive the item until Jan.05 2014.)
Please check whether the bracket is suitable for your TV or monitor.
• Look at the back of your TV, find the 4 mounting holes and measure width and height, if the width is within 20" and height is within 16"(Max VESA 500mmx400mm), then the TV Mount will work perfect for you.
•The TV weight should be below 88lbs / 40kg, and this item is guaranteed works for you.
• The wall installed TV bracket must be firmness and tightness, such as concrete wall, solid wood wall, do not install in hollow and floppy walls.
1.The wall installed TV bracket must be firmness and tightness,such as concrete wall,solid brick wall and solid wood wall.Do not install on hollow and floppy walls.
2.Tighten screw so that wall plate is firmly attached,but do not overtighten.Overtightening can damage the screws,greately reducing their holding power.
3.Do not remove screw or loosen screw until it is no longer engaged with the mount.Doing so may cause the screen to fall.
4.For security option,tighten all the screws with securlty allen wrench.
5.PLAT PANEL TV MOUNTS should be installed by specialist.
• One TV Wall Mount
• Standard hardware kit(The Screw kit is standrd,don't make sure fit all the TV models,please buy one kit if don't fit)
• User Manual